Reviews Clearance Gauge

Oshlun MTM-SD Side Dial Gauge (Set Gauge)

  • Side Dial Gauge (Set Gauge) with Plastic Storage Case.
  • Must have for any saw sharpener or saw shop.
  • Marked in 0.001-Inch increments for accurate measurements.
  • Used to measure the tangential and radial side clearance of circular saw blades.
  • Also used to check the tooth set on steel saw blades.
Check Stock

ARTILAURA 6 Gauge Set-GPS Speedometer 120MPH, Tachometer, Fuel Gauge, Water Temperature Gauge, Oil Pressure Gauge, Voltage 7 Color Backlight for Car AUTO Boat Marine(White)

  • ...ting Range: E - F & Resistance 240-33 ohms, Water Temperature gauge indicating Range: 30 - 250°F (0 - 120°C), Oil Pressure gauge indicating Range: 0 - 150 PSI (0 -10 BAR)..
  • GPS Speedometer and Tachometer: Standard 85mm (3 3/8") hole in the panel (II) and allow a clearance of 55mm (2 3/16") behind the panel to fit the gauge. The Fuel Gauge, Water Temperature, Volt and Oil Pressure Gauge diameter is 2-1/16 inch (52mm)..
  • 【Material】The boat gauge are made of 316L Metal, Rubber and Plastic. Scratch resistant curved glass lenses. IP67 waterproof and dustproof grade..
  • ⭐⭐⭐⭐⭐[Attention]: Package Includes GPS Antenna, Tachometer Sensor(M16*1.5), Water Temp Sensor (1/8 NPT), Oil Pressure Sensor (1/8 NPT), 240-33 ohms Fuel Level Sender & Installation Instructions . Please contact us if you are dissatisfied with our products, the response will be taken in 24 hours and provide proper solutions..
Check Stock

Hooke Road Wrangler TJ 4.3" Wide Rear Fender Flares Steel Tubular Flat Wheel Cover Guards for Jeep Wrangler TJ 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 (2 PCS)

  • 4.3" Wide Tubular Tube Rear Fender Flares (2 pcs) for Jeep Wrangler TJ 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 Sports Sahara Freedom Rubicon X.
  • Enhances rugged appearance. Increases tire clearance for optimal suspension articulation. Tubular design for maximum strength.
  • Protect your Jeep from mud, debris, bumps and more. Provides better handling and more clearance to keep the undercarriage away from the hazards of rocky terrain.
  • Heavy duty 16-gauge(1/16 inch) & 11-gauge(1/8 inch) steel plate and 1.5-inch steel tube construction. Textured black powder coat finish & Premium E-coating process inside for durability and long-lasting corrosion resistance.
  • Moderate installation needs some drilling. Product Weight: about 21 lbs.
Check Stock

Little Giant WX-3660-34 Welded Steel Workbench, 1 Lower Shelf, 15,000 lb. Load Capacity, 34\ x 60\ x 36\

  • Welded steel workbench with gray powder coat finish and 15,000 lb. total load capacity.
  • 7 gauge steel top with 3" x 1-1/2" support frame made of structural C channel for strength.
  • 12 gauge steel lower shelf with 500 lb. load capacity for storing items.
  • Legs made of 3" C channel and welded to the top with 7-gauge gussets for strength.
  • 4-1/2" clearance between floor and lower shelf to accommodate forklift fork.
  • 7 Gauge Steel Top Supported by a frame of 3" x 1-1/2" Structural C Channel.
Check Stock

Little Giant WX-4284-34 Welded Steel Workbench, 1 Lower Shelf, 15,000 lb. Load Capacity, 34\ x 84\ x 42\

  • Welded steel workbench with gray powder coat finish and 15,000 lb. total load capacity.
  • 7 gauge steel top with 3" x 1-1/2" support frame made of structural C channel for strength.
  • 12 gauge steel lower shelf with 500 lb. load capacity for storing items.
  • Legs made of 3" C channel and welded to the top with 7-gauge gussets for strength.
  • 4-1/2" clearance between floor and lower shelf to accommodate forklift fork.
  • 7 Gauge Steel Top Supported by a frame of 3" x 1-1/2" Structural C Channel.
Check Stock

BTSHUB Tu-21 Cylinder Leak Down Tester Kit Dual Pressure Gauges Gasoline Engine Leakage Detector with 10 12 14mm Spark Plugs

  • The cylinder leakage test gauge Kit is designed to detect common engine faults including: worn piston rings, worn valves, cracks in cylinder walls and....
  • Available with either single gauge shows % of cylinder leakage, or twin gauge manifold show cylinder leakage and cylinder pressure. Suitable for any....
  • Dual pressure gauges: 1 Cylinder pressure gauge, 1 Cylinder leakage gauge. Features a 19" long rubber nylon resin hose with quick coupler on the....
  • 3 sizes adapters: Brass coated aluminum adapters, 14mm(fixed on a 10" long hose), aluminum 12mm and 10mm (both can be connected to 14mm adapter), help....
  • Ideal for testing trucks & late model cars where clearance is minimal. Please note: This cylinder leak tester is not suitable for shallow cylinder..
Check Stock

ARTILAURA Speedometer Gauge Set - GPS Speedometer with Tachometer,Fuel Level Gauge Water Temperature Gauge Oil Pressure Gauge Voltage 4in1 Gauge for Car AUTO Boat Marine(White)

  • Gauge Set-GPS Speedometer with Tachometer, 4IN1 Fuel Level Gauge/Water Temperature Gauge/Oil Pressure Gauge/Voltage..
  • 【GPS Speedometer with Tachometer Wide Applicability】 The speedometer gauge indicating Range: 0-120MPH and 0-8000rpm. Indication light: LEFT, HIGH BEAM, RIGHT. Suitable for all vehicles Car/ Boat/Truck/Bus/AUTO and off-road vehicles..
  • 【4 in1 Gauge Multi-function 】【Alarm message】Alarm message, 1.Fuel.
  • 【Indicating Range】Engine oil pressure: 0~150PSI, Engine temperature: 100-250°F, Battery voltage: 8-16V, Fuel level: 0~ 100%. 0-190ohms for fuel level meter.
  • (Default 0-190ohms, can adjust to 240-33ohms).
  • ✅【Material】The AUTO gauge is made of Stainless Steel 316L Bezel, Rubber, Anti-fog Glass. IP67 waterproof and dustproof grade. Reverse polarity protection and anti-fogging performance. Standard 85mm (3 3/8") hole in the panel (II) and allow a clearance of 55mm (2 3/16”) behind the panel to fit the gauge..
Check Stock

ELING Universal GPS Speedometer Adjustable Odometer 0-200MPH Overspeed Alarm 85MM

  • Cut an 85mm (3 3/8″) hole in the panel and allow a clearance of 55mm (2 3/16”) behind the panel to fit the gauge. Put the gauge in the hole and screw down..
  • Connection: Black wire-GND, Red-power(+), White-external button(+), Red/Yellow-Backlight, Blue-Left turn, Green-Right turn, White wire-High Beam.
  • 9-32V Working Voltage, Red and Yellow backlights available, Indication light: LEFT, HIGH BEAM, RIGHT.
  • Securely fasten GPS antenna, preferably outdoors (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. Do not cut cable.
  • OverSpeed Buzzer Alarm, Total Mileage Adjustable, Mileage Range: 0-999999 miles.
Check Stock

KUNTEC Cylinder Leak Down Tester Engine Compression Diagnostics Test Tool Kit for Piston Ring, Valve, Head Gasket

  • The Cylinder Leak Detector Kit is designed to easily detect a variety of engine faults, including worn piston rings, worn valves, cracked cylinder walls, and blown head gasket.
  • The Engine Compression Diagnosis Tester Kit also can check the amount of leakage and locate leaks area in an engine cylinder to help determine the source.
  • Cylinder compression tester is suitable for work on any petrol engine with 12 or 14mm spark plugs, and ideal for testing trucks & late model cars where clearance is minimal.
  • Pressure gauge with dual scale reads from 0 to 100 PSI and 0 to 7 Bar, shows pressure in PSI and Bar and percentage of cylinder leakage.
Check Stock

Hooke Road Tube Steel Fender Flares + Front Wheel Well Inner Liners Kit Compatible with Jeep Wrangler JK & Unlimited 2007-2018 2/4 Doors

  • 【Compatibility】- Hooke Road Flat Fender Flares & Front Inner Fender Liners Combo Compatible with Jeep Wrangler JK 2/4 Doors 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Unlimited | Sports | Sahara | Freedom | Rubicon | X all models.
  • 【Wild Fender Flares】Offroad fender flares increase tire clearance for optimal suspension articulation. Protects your wrangler from mud, debris, collisions, and other trail hazards. Wheel fenders are made of durable 11-Gauge(1/8 in) steel. Textured black powder coat finish & Premium E-coating process inside for long-lasting durability and corrosion resistance.
  • 【Inner Fender Liners】- The upgraded front inner liners fit the vehicle body line perfectly, provide larger clearance for up to 35 inches tires. Made of high strength 16-gauge(1/16 inch) steel, durable black powder coat finished.
  • 【Easy Installation】- Bolt-on install using factory holes. Mounting hardware nuts/bolts/nut inserts/nut insert tool are included. Some drilling is required.
  • 【Package Content】- Order will be shipped in 3 separate packages. May not be delivered at the same time. Package 1&2 for 4pcs front and rear fender flares. Package 3 for 2pcs front inner fenders. All mounting hardware and detailed installation instructions are....
Check Stock

ELING Universal GPS Speedometer Odometer 80MPH 120KM/H with ODO COG Trip 7 Backlights 85mm 12V 24V

  • Cut an 85mm (3 3/8") hole in the panel and allow a clearance of 70mm (2 3/4”) behind the panel to fit the gauge. Put the gauge in the hole. Using M4 nut and C type bracket to seal up the gauge..
  • For the GPS antenna, you should securely fasten it in the flat position, black side upwards, preferably outside (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. And do not cut cable..
  • It shows Current Speed, TRIP/COG(choose one), ODO(cannot be reset). If you need other color faceplate, pls. search for ASIN B07KNR2ZFT or B07KNR7NR7.
  • Backlight: Red Green Blue White Yellow Orange Purple Light Green or automatic.
  • 9-32VDC(12VDC/24VDC) Working Voltage,1 year Warranty, 100% Waterproof and anti-fogging protection.
Check Stock

AA-Racks Model DX36 Universal Two Bar Drilling Van Roof Rack Heavy-Duty Adjustable Steel Rack Sandy Black

  • Mounts onto roof of vehicle (drilling required for installation).
  • 13 Gauge (2.25mm actual) Steel construction provides 350lb Max. loading capacity.
  • 11 gauge high strength steel mounting base.
  • 4″ total height clearance (accessories not included).
Check Stock

AA-Racks Model DX36 Universal 2 Bar Drilling Van Roof Rack Heavy-Duty Adjustable Steel Rack Matte White

  • Mounts onto roof of vehicle (drilling required for installation).
  • 17 Gauge (1.35mm actual) Steel construction provides 350lb Max. loading capacity.
  • 11 gauge (3.2mm actual) high strength steel mounting base.
  • 4″ total height clearance (accessories not included).
Check Stock