Reviews Class D Integrated Amplifier

Parasound NewClassic 200 Integrated Amplifier

  • Integrated amplifier with built-in DAC and MM phono stage.
  • Class D amplifier stage designed by renowned Danish company Pascal.
  • 110 watts-per-channel RMS at 8 ohms, 110 watts-per-channel RMS at 4 ohms.
  • Phono input for MM or MC cartridges, Pure analog signal path for all analog inputs.
  • Analog bass management includes 12 dB/octave high-pass crossover, adjustable 20 Hz-140 Hz.
Check Stock

MTX GENERAL-10 Amplified 10 Inch Subwoofer Enclosure Sound System for UTV Polaris General 2016 to 2018 1000 EPS 4 1000 EPS 1000 EPS Hunter Edition and 1000 EPS Ride Command Edition

  • FITS POLARIS GENERAL MODELS: 1000 EPS 2016-2018, 4 1000 EPS 2016-2018, 1000 EPS Hunter Edition 2016-2018, and 1000 EPS Ride Command Edition 2016-2018.
  • BUILT-IN CLASS D AMPLIFIER: Easy installation as the integrated 250-watt RMS class D amplifier only requires power and signal.
  • EXTERNAL GAIN CONTROL: Low-level input with external gain control gives you power over the quality of the bass sound.
  • 10-INCH SUBWOOFER: High-efficiency 10-inch polypropylene subwoofer produces quality low-end bass to give your sound system more range.
  • NO CUTTING OR DRILLING TO INSTALL: Mounts in center console with no cutting or drilling required and is invisible once installed.
Check Stock

BoyuuRange A50 MKIII 300B HiFi Intergrated Tube Amplifier Single-end Class A Valve Amp with Tube Cage

  • ...s and 2pcs*12AX7 control lamps (ECC83) and 2pcs*12AU7 control lamps (ECC82),the amplifier reproduces a very even sound, without any coloration..
  • Good Sound Quality with Tube Warmth Feel: the Yaqin MC13S has a very minimal and straightforward circuit, doesn’t have bells and whistles normally found in more expensive integrated amplifier. The bare-bones circuitry of this amplifier delivers a very high-quality sound. The circutry is based on a time tested , ultra-linear push-pull design which made the sound of an EL34 based integrated amplifier the mainstay of frugal tube amp audiophies..
  • High-grade Components：many of the circuit components are of audiophile grade, produced by well-known Japanese,American, and European conpanies, such as Solen/Philips/Siemens/Thomson capacitors, Alps volume controller.High quality STALLOY transformers were used..
  • Well-made Quality: well-made chassis is composed of a brushed anodized aluminium front panel in 10mm thickness, two anodized aluminium side panels in 4mm thickness,and top and bottom covers made of high quality steel, the four line inputs , six banana speaker plugs ,the volume control and the input switch are first rate.
  • More affordable Price ：Yaqin MC-13S can be considered one of the best class A integrated a....
Check Stock

Precision Power E.7 1/2 DIN 7-Band Parametric Equalizer with LED Display

  • QUALITY - This Class D Monoblock Amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this mono sub amp stand out amongst the others..
  • 1 Ohm Stable - This SPL Audio Subwoofer Amplifier is able to power loads of 1 Ohm on a continuous basis without facing any difficulties like overheating, making extra sounds. This Class D amplifier is designed to power subwoofers that have a constant demand of high power in order to operate effectively..
  • Features – The monoblock bass boost amplifier has features like - Frequency Response: 15~150HZ, Bass Boost, SNR: >105DB, Remote Bass Knob, 2-way protection, Input Sensitivity: 200mV to 6V and THD:.
  • Power – This Class D 3000 Watt Amplifier has a power rating distribution as followed 1500 X 1 @ 1 OHM, 1000 X 1 @ 2 OHMS, 700 X 1 @ 4 OHMS. The monoblock amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Crossovers- The SPL Monoblock Car Amplifier offers you the ease of connectivity by providing the feature of crossover. The monoblock car amplifier provides you with options of variable 50-400hz 12db low pass crossover, variable 17-50hz 12db subsonic crossover, ....
Check Stock

Rockford Fosgate R1200-1D Prime 1,200 Watt Class-D Mono Amplifier

  • The RMS rating on this amplifier 400 watts x 1 @ 4 ohm, 800 watts x 1 @ 2 ohms and 1200 watts x 1 @ 1 ohm.
  • Number of items: 1.0.Package Weight: 3.357 kilograms.Package Dimensions: 10.922 L x 35.052 H x 23.368 W (centimeters).Class D Amplifier.Mono-channel Amplifier.The RMS rating on this amp 400 Watts x 1 @ 4-Ohm, 800 Watts x 1 @ 2-Ohm and 1200 Watts x 1 @ 1-Ohm.
Check Stock

Orion Ztreet Monoblock Car Amplifier – Class D Stereo Power Amplifier 2000 Watt Max, 1 Ohm Stable, Bass Boost, MOSFET Power Supply, Car Electronics Mono Sub Amp, Audio Speakers, Great for Subwoofers

  • QUALITY – This Class D Monoblock Car Amplifier for subwoofer exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this mono sub amp stand out amongst the others..
  • 1 Ohm Stable – This monoblock class D subwoofer amplifier is able to power loads of 1 Ohm on a continuous basis without facing any difficulties like overheating, making extra sounds. This Class D mono sub amp is designed to power subwoofers that have a constant demand of high power in order to operate effectively..
  • Power – This Class D 2000 Watt Amplifier has a power rating distribution as followed 300 x 1RMS @ 1Ohm. The monoblock amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Crossovers- The Orion Ztreet Monoblock Car Amplifier offers you the ease of connectivity by providing the feature of crossover. This mono sub amp offers you a low pass cross-over of 40Hz-250Hz and a 4 gauge power and ground terminals with a remote bass knob.
  • Features – The monoblock bass boost amplifier has features like – Frequency Response: 10Hz~250KHZ, Bass Boost, SNR:90DB, Remote Bass Knob, 2-way protection.
Check Stock

Taramps 4 Channel Car Amplifier – Class D Multichannel Amplifier 1200 Watt RMS Car Electronics Car Audio Subwoofer 2 Ohm Stable Bass Boost Crossover for Car Speakers Sub Amp

  • Quality - This Class D 4 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • Power – This Class D 1200 Watt RMS Car Amplifier has a power rating distribution as followed 300x4 @2 Ohms, 192x4 @4 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Crossovers- The Taramps Multichannel Car Amplifier offers you the ease of connectivity by providing the feature of crossover. The 2 channel car amplifier provides you with options of fixed 90Hz Highpass & Lowpass crossovers..
  • Features – The 4 channel bass boost car amplifier has features like - Frequency Response: 9Hz-27KHZ, Bass Boost, SNR>88DB, Remote Bass Knob, 2-way protection, hi/low pass crossovers and 2 Ohm Stable.
  • Includes - (1) Taramps 1200W RMS 4 Channel Class D Amplifier.
Check Stock

YAQIN MC-13S Push-Pull Integrated Stereo Tube Amplifier,Output Power 40Wx2, Tubes:2x12AX7, 4xEL34,2x12AU7,AC110V and 230V Optional.

  • ...s and 2pcs*12AX7 control lamps (ECC83) and 2pcs*12AU7 control lamps (ECC82),the amplifier reproduces a very even sound, without any coloration..
  • Good Sound Quality with Tube Warmth Feel: the Yaqin MC13S has a very minimal and straightforward circuit, doesn’t have bells and whistles normally found in more expensive integrated amplifier. The bare-bones circuitry of this amplifier delivers a very high-quality sound. The circutry is based on a time tested , ultra-linear push-pull design which made the sound of an EL34 based integrated amplifier the mainstay of frugal tube amp audiophies..
  • High-grade Components：many of the circuit components are of audiophile grade, produced by well-known Japanese,American, and European conpanies, such as Solen/Philips/Siemens/Thomson capacitors, Alps volume controller.High quality STALLOY transformers were used..
  • Well-made Quality: well-made chassis is composed of a brushed anodized aluminium front panel in 10mm thickness, two anodized aluminium side panels in 4mm thickness,and top and bottom covers made of high quality steel, the four line inputs , six banana speaker plugs ,the volume control and the input switch are first rate.
  • More affordable Price ：Yaqin MC-13S can be considered one of the best class A integrated a....
Check Stock

Behringer Eurolive B210D 200W 10 inch Powered Speaker

  • 10" Powered PA Loudspeaker with 200W Class D Amplifier.
Check Stock

Behringer Eurolive B208D 200W 8 inch Powered Speaker

  • 8" Powered PA Loudspeaker with 200W Class D Amplifier.
Check Stock

Behringer Eurolive B215D 550W 15 inch Powered Speaker

  • 15" Powered PA Loudspeaker with 550W Class D Amplifier.
Check Stock

Hifonics BG-2500.1D BRUTUS Gamma 2500 Watt Mono Car Audio Amplifier Class D Amp Bundle with Rockville RWK01 0 Gauge Complete Car Amp Wiring Installation Wire Kit w/ RCA's

  • Package Includes: (1) Hifonics BG-2500.1D BRUTUS Gamma 2500 Watt Mono Car Audio Amplifier Class D Amp. (1)Engauge by Memphis KIT0 0 Gauge Amplifier Amp Installation Wire Kit 17 ft. RCAs. Features: Low Noise Preamplifier Circuit: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion. RCA Inputs: Nickel-plated RCA jacks create the most effiecient High/Low Level audio connection and resist corrosion. Operation Mode: Mono only.
  • Crossover Type: Variable electronic crossovers allow for complete control of the sound. Electronic Equalizer: Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers..
  • Class/Topology: Super D-Class designs which employ high-speed microprocessors with proprietary D/A conversion algorithms to efficiently control the current consumption. At very high listening levels, Hifonics amplifiers with Super D-Class circuitry result in lower distortion, higher current efficiencies and less heat than conventional D-Class amplifier designs..
  • Output Device Technology: Pro-Fi Output Device Technology, The U....
Check Stock

T-Power 24V Ac Dc Adapter Charger Compatible with SMSL SA50 SA-50 SA-60 SA60 50Wx2 Audio Q5 TDA7492 SAP-24045-T TPA3116 Stereo Digital Amplifier Switching Power Supply

  • T-Power - manufactured with Brand-new Input Voltage Range: AC 100V - 240V (24V-6A ).
  • Compatible Models: SMSL SA50 SA-50 SA-60 SA60 50Wx2 TDA7492 , SMSL SA-60 60WPC TPA3116 Class D Amplifier ( Black , Sliver , Gold ).
  • S.M.S.L T-AMP Model: SAP-24045-T SAP24045T Fits SMSL SA-50 SA50 50Wx2 TDA7492 Class D Hi-Fi Stereo Digital Amplifier Power Supply.
  • S.M.S.L SMSL SA-50 SA50 50Wx2 TDA7492 SA-60 SA60 602 TPA3116 Class D Big Power Hi-Fi HiFi Stereo Digital Amplifier.
  • SMSL AD18 HiFi Audio Stereo Amplifier , S.M.S.L SMSL Audio Q5 Pro Digital Amplifier.
Check Stock