Reviews Clamping

Bessey One Hand Trigger Clamps Medium EZR-SET

  • Set of 2 Track Clamps 6" Capacity Throat Depth 2 3/8" for use on track saw guides, 100 lb force.
  • Quick clamping, smooth operating, consistent clamping force for track saw quides & general clamping /spreading.
  • 4 5/8" to 12 1/8" spreading capacity, simple push button for reversing fixed jaw for change to spreading, no tools needed.
  • V-Grooved, non marring pressure pads included.
  • "Step Over" design jaw allows clamping over obstructions, includes ergonomic comfortable soft grips for easy clamping.
Check Stock

Bessey DUO65-8 24-Inch DuoKlamp One Hand Clamp/Spreader

  • Just turn the knob to change from clamping to spreading while using only one hand.
  • Large flat clamping jaws with soft pads allows clamping sensitive surfaces, right angles and both rounded and pointed work pieces.
  • 24" capacity with 800 lbs of clamping and spreading force.
  • Innovative pump lever allows effort free clamping or spreading.
  • Quick release of jaws with the push of a buttonDescriptionJMCDUO65-8 Features: -DUOKLAMP. -UNSPC CODE: 27112100. -Clamps Clamps mro plant maintenance clamp. -3 1/4IN x 24IN ONE-HANDED. Product Type: -Clamps..
Check Stock

BESSEY KRE3550 PAIR 50' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 50" KRE3550 clamps: 50" of clamping capacity, a 3-3/4" throat depth, a 10" to 52-1/2" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

BESSEY KRE3531 PAIR 31' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 31" KRE3531 clamps: 31" of clamping capacity, a 3-3/4" throat depth, a 10" to 36-1/2" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

BESSEY KRE3524 PAIR 24' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 24" KRE3524 clamps: 24" of clamping capacity, a 3-3/4" throat depth, a 10" to 28-3/4" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

Pyatofyy 4 Pack T-Track Clamp, T Track Hold Down Clamps Kit Compatible with 3018-,3018-PROVer,1810- CNC Router Machine

  • Adjustable 3 gears, high, medium and low, different clamping force suitable for different working condition..
  • Constructed of high quality aluminum alloy and stainless steel provides the hold fast clamps with maximum durability and strength..
  • Maximum clamping is 60mm, the clamping height can be adjusted according to the thickness of the board..
  • Quick and easy clamping,slide the bench hold down clamp into your workbench dog hole, hold wood in place and then press the gear,easier clamping,reduce hand fatique.
  • Use with your workbench,works best on workbenches 20~40mm thickness(maximum clamping 60mm),Drill a suitable vertical dog holes into your workbench top and slide your holdfast workbench clamps into the hole..
Check Stock

Triton SuperJaws SJA100E Portable Clamping System

  • Robust, powder-coated, all-steel construction for long-lasting service life.
  • Powerful 2200 ft.lbs clamping force for controlled clamping pressure.
  • Foot-operated clamping allows hands-free operation.
  • Extra-wide tripod base maximises stability for large workpieces.
  • Reversible sliding jaws allow extra-wide clamping width capacity, up to 37 1/2".
Check Stock

Barb Clamp Rohr Clip - Hose Clamps 10pcs Adjustable Double Wire Water Hose Barb Clamp Pipe Clip Hoop Plumbing Fastener(25mm（21-25）)

  • 【USEFUL AND PROVIDE GREAT CLAMPING FORCE】:Double wire designed screw clamps are very useful and provide great clamping force.Convenient to use, simply release and tighten the screw to adjust the clamp diameter.
  • 【SMOOTH EDGES】:The smooth edges of the round wire are harmless to hands or hosesDouble steel wire are more stronger and can be used for long time fastening.
  • 【Widely used】: Prevent hose extrusion with the hose clamp. Steel wire band is more stronger for long time fastening use, Ideal for industrial or home use, help to lessen pressure and protect the hose..
  • 【Functionality】: Ring hose Clamps designed to provide a secure and flexible option for connecting pipes to dust hoods, blast gates and other dust collection fittings.
  • 【MATERIALS】:These hose clamps are made of stainless steel and the surface is plated with ....
Check Stock

BLACK+DECKER Workmate Portable Workbench, 550-Pound Capacity (BDST11000)

  • Quick clamping with flexible clamping options.
  • Heavy gauge steel frame for up to 550 lbs. workload.
  • One Hand quick folding – easy and compact.
Check Stock

IRWIN QUICK-GRIP C Clamp, 8-Inch (225108)

  • Larger handle on this c-clamp makes it easier to apply torque for more clamping pressure with less hand fatigue..
  • Double-threaded screw reduces screw deflection and drift for faster clamping and allows you to apply 50% more clamping force than with most clamps..
  • For woodworkers, carpenters, welders, builders, or do-it-yourselfers. Suitable for general clamping needs..
  • Larger swivel pad reduces marring on work surface and increases stability..
Check Stock

LAOA Vise-Grip with Wire Cutter Original Locking Tool 5-Inch Curved Jaw Locking Pliers Clamping plier Pipe Wrench

  • LAOA Vise-Grip with Wire Cutter Original Locking Tool 10-Inch Curved Jaw Locking Pliers Clamping plier Pipe Wrench.
Check Stock

BESSEY DUO45-8 18 In DuoKlamp Series One Hand Clamp/Spreader

  • Changes from clamping to spreading with a quick twist of a dial.
  • Only reversible clamp that does not require some degree of disassembly to change direction.
  • Ergonomic handle with pump lever configured parallel to the rail for balanced, safe handling.
  • Quick press of a button allows the clamping arm to quickly slide up or down to clamping position.
  • Large polyamide parallel jaws facilitate clamping on all four edges.
Check Stock

DRAGONITE Heavy Duty C Clamp, Vise Grip Locking Pliers With Swivel Pads, 18 Inch Face Clamp for Woodworking, Welding and Pocket Hole Joinery, 2 Piece

  • QUICK, CONVENIENT CLAMPING: This c clamp provides quick and convenient clamping, the jaw depth is 8 inch (200 mm) and can grip materials up to 6-1/4 inch (160 mm), the face clamp is suitable for woodworking, welding and more work.
  • EVENLY DISTRIBUTE CLAMPING FORCE: The locking pliers equipped with thickened metal swivel pads, and large clamp faces spread pressure evenly, prevent scratches on wood and glass, The material is firmly fixed and will not be easily deformed.
  • EASY-TO-REGULATE CLAMPING PRESSURE: Easily and quickly adjust jaw capacity with a simple thumbscrew, helps create a flush joint, set your desired clamping pressure by turning the thumbscrew for more or less pressure.
  • HIGHLY DURABLE CONSTRUCTION: High carbon steel forging, sandblasted surface, anti-corrosion and wear-resistant, Ergonomic non-slip grips for comfort and ease-of-use, Each joint is fixed with reinforced rivets, which is firm and durable.
  • 2-PACK PACKAGE: two piece vise grip c clamp as a set, to meet the needs of general clamping.
Check Stock