Reviews Clamp Check

LEDupdates C-Clamp for Trade Show LED Light Popup Booth Exhibit Back Drop Panel Display Light

  • C-clamp for Trade show LED light that can be mount on to backdrop pole and board. Aluminum construction with black coating.
  • FIt LEDupdates Trade show light, please check asurement if you decide to use on other brand lights. the me.
  • Can be clamp onto up to 2" 5/8 wide backdrop with dual slide in groove. 4.5" x 1/2" W x 2" H.
  • Perfect replacement for your Trade show Light. ( please check the size of your mounting base on your light ).
  • 1pcs C-clamp only. LED Light is not include in this sale.
Check Stock

Manitou Markhor Fork 26" 100mm Travel, 9mm Axle, Matte Black

  • Package includes: A pair of front fork assembly with hydraulic oil+triple clamp handlebar riser set.
  • 45mm top clamp and fork, 48mm bottom clamp and fork, fit 7/8'' 22mm handle bar.
  • Triple clamp made by machined from high quality aluminum alloy.
  • Fork length: 735mm (from leg top to wheel axle centre) , for 14" to 17" front wheels.
  • Please check the size of your stock front fork for compatibility.
Check Stock

SharkBite 24947 Plumbing Straight Stop, Metal 1/2' x 1/2'

  • PEX CLAMP TOOL: Time and cost savings in combination with SharkBite PEX Stainless Steel 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 1 inch Stainless Steel Clamp Rings.
  • FAST: No waiting for glue to dry or joints to cool.
  • USE: Works in conjunction with PEX Stainless Steel Clamp Rings, PEX Barb Fittings and PEX Pipe Tubing.
  • ASSURANCE: PEX Clamp Tool will not release until a secure connection is made removing the need to check each fitting with a go/no go gauge.
  • RESIDENTIAL and COMMERCIAL: All SharkBite products meet the same standards for commercial and residential plumbing applications.
Check Stock

CREDSTAR Stainless Steel Destroyer Steering Wheel ,With 5 Spoke Boat Marine Black PU Foam 13-1/2 Inch

  • Material: Marine Grade Aisi 316 Stainless Steel.
  • Fits Oval Steering Wheels Tube with Rim Dia. from 5/8"-1" * 5/8"-3/4" （Please check the your Steering wheel Rim Dia. before purchase）.
  • Package Included: 1 Marine Boat Steering Wheel Knob, 1 Small Wrench.
  • The Mounting Clamp is Designed for an Oval Ring Bar. If Your Wheel is Round Stock, You Could Reshaped the Lower Piece Slightly with Two Pairs of Pliers..
  • The Mounting Clamp is NOT Round, Please Check the Size of the Last Three Pictures..
  • Any Questions, Please Feel Free to Contact us..
Check Stock

Merrell mens MOAB 2 WTPF Hiking Shoe, Granite, 10 US

  • 19" front wheel assembly for pit pro trail dirt bike.
  • 45mm top clamp and fork, 48mm bottom clamp and fork, fit 7/8'' 22mm handle bar.
  • The assembly comes complete with the front 1.6 x 19 rim, 70/100-19 knobby tire, inner tube, wheel bearings.
  • Please note: Tire sizes vary by ride, please check your current tire and wheel sizes before placing the order.
  • Package include: 1 x Tire + 1 x Rim + 1 x Inner tube + 1 x Brake Disc + 1 x Brake Master Caliper + 1 x Rim Axle + 2 x Front Fork Assembly + 1 x Triple Clamp Handlebar Riser set.
Check Stock

Yescom PEX One Hand Cinch Clamp Tool Ratchet Clamping Pinch Wrench Crimper 3/8″ to 1″ Stainless Steel Pinch Clamp ASTM

  • [Great Compatibility]: PEX cinch clamp tool kit meets the ASTM F2098 standard and includes 1pc cinch clamp tool, 1pc Allen key, 1pc calibration tool for creating secure stainless steel clamp connection with PEX fittings in PEX piping system.
  • suitable for cinch clamp size ranging from 3/8″ to 1″.
  • [One Hand Ratchet Design]: Ratcheting design reduces incorrect connections, easy to turn the release button for auto-releasing the ratchet, clamp tool will not release from the clamp ring unless the connection has been made, perfect for saving labor and operating the tool with one hand.
  • [Easy to Use]: LED indicator on the tool for helping to check the connection is completed or not, LED light comes on when the clamp is fully engaged, great for ensuring the connection is proper and secured.
  • [Durable & Ergonomic]: Hardened carbon steel construction for ensuring reliability and durability, suitable for long time use.
  • handles with rubber grip for comfortable holding and reducing fatigue, accommodate gloved and bare hands.
  • [Calibration & Wide Application]: Allen key for adjusting the jaw gap and calibration gauge with 1.4mm side and 1.2mm side for measuring the jaw space.
  • widely used for using in tight space such as PEX tubing connection, plumbing, manifold instal....
Check Stock

AuInn Scientific Labwares Lab Tools Starter Kit, Includes Crucible Beaker Tongs Lab Spatula Scoop Spoon Test Tube Clamps Sterilizer Forceps Tweezers

  • 【Package Contents】: This Labwares Essential Lab Tool Starter Kit contains 10 PCS, Covering 1 × Breaker Tong, 1 × Crucible Tong, 1 × Test Tube Clamp, 1 × Sterilizer Forceps, 1 × Lab Spoon, 1 × Double-Head Lab Spoon, 4 × Double-Ended Spatulas..
  • 【Crucible Tong & Breaker Tong】: Crucible Tong is used to clamp the crucible for heating, or to put the crucible into the heat source (such as gas lamp, electric furnace, crucible clamp, muffle furnace, alcohol lamp). When heating the crucible, it is used to clamp the crucible or cover the crucible. Convenient anti-skid jaws for secure grabbing and handling. Beaker tongs are perfect for holding glass laboratory products..
  • 【Double-Ended Spatulas】: Convenient to retrieve powders and mix ingredients together in deep container..
  • 【Test Tube Clamp】: Used to hold test tubes when they are hot or untouchable..
  • 【Note】: Please check the SIZE before purchasing. You can get the most friendly customer service..
Check Stock

TDPRO Upside Down Front Fork Shocker and Triple Clamp Handlebar Riser set 45mm/48mm for Dirt Pit Pro Trail Bike 110cc 125cc 150cc (Black+Black 700mm)

  • Package includes: A pair of front fork assembly with hydraulic oil+Triple Clamp Handlebar Riser set.
  • 45mm top clamp and fork, 48mm bottom clamp and fork, fit 7/8'' 22mm handle bar.
  • Triple clamp made by machined from high quality aluminum alloy.
  • Fork length: 700mm (for 12" to 14" front wheels).
  • !!! Please check the size of your stock front fork for compatibility.
Check Stock

Smoker Toggle Latch BBQ pit lid clamp Front Flat mount 2 pk

  • If you are looking for a Highland Clamp, check out LavaLock LL-12050, as this clamp is not ideal for that smoker.
Check Stock

Trkimal Complete 45mm/48mm Front Fork Shocker and Triple Clamp Handlebar Riser Set for Dirt Pit Pro Trail Bike Motocross Upside Down Shocker 110cc 125cc 150cc

  • Specification: 45mm top clamp and fork, 48mm bottom clamp and fork, fit 7/8'' 22mm handle bar.
  • Fork length: 735mm (from leg top to wheel axle centre), for 14" to 17" front wheels.
  • Material: Triple clamp made by machined from high quality aluminum alloy.
  • Package include: A pair of front fork assembly with hydraulic oil+Triple Clamp Handlebar Riser set.
  • Noted: Please check the size of your stock front fork for compatibility.
Check Stock

SENQI Bicycle Rise Cruiser Handlebar 25.4mm Silver

  • Weight: 0.75lb, End To End Width: 550mm. Have an ISO standard 1" stem clamp diameter..
  • Lightweight aluminum alloy construction. Anode polishing..
  • Comfortable hand positioning and quick handling. Bar bore clamp diameter:25.4mm.
  • This handlebar for Fixed-Gear, Single-Speed, Road bicycle,Ladies and Casual.
  • Bar ends diameter:22.2mm. Note:Please check your size..
Check Stock

Roadformer 1.5' T-Bolt Hose Clamp - Working Range 44mm - 50mm for 1.5' Hose ID, Stainless Steel Bolt, Stainless Steel Band Floating Bridge and Nylon Insert Locknut (44mm - 50mm, 2 pack)

  • Roadformer 1.5" T Bolt hose clamp: 1/4"-28 300-Series SS Bolt, 3/4" Band in 300-Series SS Floating Bridge and Nylon insert locknut.
  • 1.5" T Clamp Working Range: Diameter 1.73" - 1.96" same as 44mm - 50mm for 1.5 inch Hose I.D. - not O.D..
  • It’s better to check your Hose OD to fit the working range before purchasing, for some extreme thin or thick hose, please consider appropriate clamp size.
  • Roadformer high quality T-bolt clamp performance-engineered for long-term durability. T bolt Clamp provides leak-proof connections in a wide variety applications of Industrial, Automotive and Special Equipment.
  • 2 Pieces in Package - Roadformer private label products set industry Standard with Premium Quality.
Check Stock

EZshoot 8-10 Inches Clamp-on Bipod for Rifles, Double Pads Round Barrel Mount Bipod, Adjustable Height Foldable Quick Release Bipod, Barrel Size: 0.43 to 0.75 Inch

  • 【Adjustable Barrel Size】With the clever adjustment wheel, this clamp-on bipod fits rifle barrel for wide range of sizes from 11mm to 19mm (0.43 inch-0.75 inch). Please pay attention to check if this bipod fits your barrel..
  • 【Barrel Protection & Stable Support】Upgraded double rubber pads are added on the top and bottom of the clamp to increase more friction without causing scratch to the barrel, which enables to keep it tight on the clamp-on bipod..
  • 【Foldable Arms & Adjustable Legs】A push of the round wheel button allows the tactical clamp-on bipod to fold its arms for easy carry and storage. While the height of legs can be adjusted from 8-10 inches with spring retraction by slightly rotating the swivel nob. Please take care not to be injured by the ejected bipod legs during operation..
  • 【Superb Production for Excellent Performance】Made of durable and strong aluminum, this lightweight clamp-on bipod can withstand normal recoil of rifle and enhance shooting experience in various environment..
  • 【Nonslip Rubber Feet】The shockproof and antiskid Rubber feet pads enable to stabilize the clamp-on bipod and improve the accuracy of shooting or hunting..
Check Stock