Reviews Circular Saw Guide Jig

Bora WTX Clamp Edge and Straight Cut Guide for Circular Saws | 50 Inch Cutting Length, 543050

  • GET IT STRAIGHT – This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. Its long 50in length allows you to saw with precision and skill..
  • CONTRACTOR’S COMPANION - This tool is made for use with the Bora WTX Saw Plate (sold separately), and can be conveniently paired with your own circular saws, routers, jig saws, and other power tools..
  • LOCKED IN - The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won't budge..
  • AS LONG AS YOU NEED – Modular design allows for additional extrusions to be added which can expand the guide up to 100 inches. With the WTX clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts..
Check Stock

DCT Taper Gauge Jig Tool Kit Set for Tapering (Angle Cutting) Wood Tapered Legs and More on Radial Arm or Table Saw

  • EASY TO USE: Mark your piece of wood with the angle cut you want to create, set the taper jig next to the piece of wood and measure the distance from the marked angle to the taper jig on both the small and large sides of the marked angle, adjusted taper width until both measurements are equal, set the taper guide against the fence and board against taper guide, align marked angle line to saw blade, and cut moving both the taper guide and wood piece along saw.
  • CONTENTS: Package includes (1) pair of jig legs, (1) scale, (1) locking bracket, (1) work stop, (1) handle, assembly hardware, and assembly instructions.
Check Stock

Festool Plunge Cut Track Saw TS 55 FEQ-F Plus FS w/55" Guide Rail

  • The Festool TS 55 is not your standard circular saw. The saw rides on a guide rail, or track, providing accuracy and versatility allowing it to replace the world's most advanced cabinet saws, miter saws and panel saws. The TS 55 track saw delivers precise, splinter free, glue ready cuts and only takes seconds to setup. Breaking down sheet goods? Cuts at an obscure angle? No longer is there a need to design a complex jig or move heavy material to your large shop equipment..
  • The TS 55 track saw works seamlessly with it's integrated rail, available in various sizes. Utilize the rail and saw with or without a table or work surface. The track saws flat housing allows for flush cutting..
  • Concentrated torque and up to twice as fast work progress with an increased saw blade service life..
  • Virtually splinter-free on both sides thanks to attachable splinter guard..
  • The cutting edge from 90° to 47° remains unchanged even when the saw bevels..
Check Stock

260mm Track Saw Square Right Angle Circular Saw Guide Rail Angle Stop Compatible with Festool and Makita Guide Rail

  • EXCELLENT FEATURES: Designed to have standard right angle, this circular saw guide rail ensures higher accuracy for woodworking. Circular saw guide rail system can quickly and accurately set the slicing or milling angle, which can make precise and repeatable 90 degree cuts with the guide rail, no need to readjust, you can use it for daily use or work, which can give you for a perfect experience..
  • UNIQUE DESIGN: 90 degree saw guide for circular saw has a hollow design, light in weight and compact in size, both the daily storage and carrying are very convenient..
  • DURABLE MATERIAL: 340mm track saw square right angle is made of high-quality aluminum alloy and stainless steel material, which has a stable structure and is not easy to damage and bend, rustproof and durable for long term use..
  • EASY TO INSTALL: 340mm right angle circular saw guide rail is easy to use, with simple installation and removal steps, you can complete the installation in just a few steps, whether you are a professional woodworker or a beginner, electric circular saw track is essential..
Check Stock

Bora 543042K 36 WTX Clamp Edge & Saw Guide Kit

  • Rigid aluminum straight edge guide with 36-inch capacity for making straight and accurate cuts.
  • The saw guide works with most circular saws to help keep your saw straight to make accurate cuts.
  • Fits right and left handed circular saws.
  • Saw guide fits right handed and left handed circular saws.
Check Stock

DCT Woodworking Thin Rip Table Saw Jig Guide Tool for Router or Band Saw Cutting Wood/Ripping Chair Slates, Cabinet

  • EFFORTLESSLY CUT THIN RIPS: The DCT Woodworking Thin Rip Table Saw Jig Guide Tool for Router or Band Saw Cutting Wood / Ripping Chair Slates, Cabinet allows you to cut reproducible thin rip cuts on the alternate side of a saw blade for safety, accuracy, and cut repeatability.
  • This jig maximizes worker safety, streamlines your workflow, and produces successful outcomes.
  • EVEN CUTS: Measurement markings on jig are easy to read so you can make accurate cuts.
  • Ball-bearing roller keeps stock even while fed through the blade creating a smooth flow and applying consistent pressure.
  • SAFETY FIRST: Protects your hands and fingers by preventing unnecessary hand proximity to the sharp blade.
  • Reduces dangerous kickback by keeping the stock completely on the track and preventing it from getting trapped between the fence and the blade.
  • Allows you to work on the free side of the blade thus avoiding unnecessary risk and stock binding.
  • SECURE GRIP: Easy-to-grip knob on the top turns the locking miter bar piece and holds its position firmly to secure guide position.
  • Dual-locking feature ensures the guide point locks jig in an optimal placement in a standard 3/4-inch x 3/8-inch miter slot for a specific job.
  • Roller on the end acts as a stop for the material and allows the w....
Check Stock

BORA 4-piece NGX Compact Set

  • Includes 24" NGX clamp edge, 25" NGX clamp edge extension with connectors, rip handle, saw plate.
  • Made of heavy-gauge, rigid aluminum for extreme durability.
  • For use with circular saws, routers, jig saws, and other portable power tools to achieve track saw like cuts.
  • Can be used on right- or left-handed circular saws — no tools necessary to switch.
Check Stock

Milescraft 14000713 Saw Guide for Circular and Jig Saws

  • Incremental trim feature makes tool-free adjustments by 1/16 inch.
  • Extends saw blade up to 9.5″ from edge of workpiece with Jigsaws.
  • Extends saw blade up to 6″ from edge of workpiece with Circular Saws.
  • Cuts circles from 4″ to 19″ in diameter.
  • 4 metal bars and special clips accommodate most circular and jig saws.
Check Stock

Chain Saw Sharpening Jig, Chain Saw Sharpener Tool with 5Pcs Tungsten Carbide Chainsaw Sharpener Bits, Portable Manual Chainsaw Chain Sharpening Jig Kit for 4"-22" Chain Saws, Keep Chain Saw Sharp

  • ...n and save time and effort on your job..
  • "Easy to Use Chainsaw Sharpening Jig: This manual chainsaw sharpener jig kit is as easy to use as a pencil sharpener. ①Install the chainsaw sharpener bit on the hand crank then thread it into the 30 ° front angle catheter. ②Fix the chainsaw sharpener jig on the chain saw guide plate. ③Turn the hand crank to get sharp teeth. ④After sharpening a tooth, just pull the chain to sharpening the next tooth, and repeat this action until the whole chain is clear again.".
Check Stock

Chainsaw Sharpening Jig Chain Saw Sharpener Tool with 5 Pcs Tungsten Carbide Chainsaw Sharpener Bits Hand-Cranked Chainsaw Chain Sharpening Jig Kit for 4 -22 Chain Saws Keep Chain Saw Sharp

  • ...pening tools will increase productivity..
  • Easy to Use Chainsaw Sharpening Jig: This manual chainsaw sharpener jig kit is as easy to use as a pencil sharpener. ①Install the chainsaw sharpener bit on the hand crank then thread it into the 30 ° front angle catheter. ②Fix the chainsaw sharpener jig on the chain saw guide plate. ③Turn the hand crank to get sharp teeth. ④After sharpening a tooth, just pull the chain to sharpening the next tooth, and repeat this action until the whole chain is clear again..
Check Stock

Bora 36 Wtx Modular Clamp Edge w/ruler 545036

  • Made of heavy-gauge, extruded aluminum for extreme durability.
  • Adjustable clamp end slides easily up and down saw guide to fit material to be cut.
  • Locking handle grabs work surfaces for a secure edge that won't budge.
  • Ruled extrusion allows for easy measurements.
  • Fits with the Bora router guide, saw guide, and jig saw guide.
  • Cut a wide variety of angles with the WTX Track Clamps.
  • Easy to increase length with extension accessories.
Check Stock

Bora 24 WTX Modular Clamp Edge w/ruler 545024

  • Made of heavy-gauge, extruded aluminum for extreme durability.
  • Adjustable clamp end slides easily up and down saw guide to fit material to be cut.
  • Locking handle grabs work surfaces for a secure edge that won't budge.
  • Ruled extrusion allows for easy measurements.
  • Fits with the Bora router guide, saw guide, and jig saw guide.
  • Cut a wide variety of angles with the WTX Track Clamps.
  • Easy to increase length with extension accessories.
Check Stock

Thin Rip Jig Table Saw Jig for Making Repetitive Narrow Strip Cuts on Table Saws with 3/4\ x 3/8\ Miter Slots • Also Works with Many Router Tables and Band Saws

  • ...gh the blade to achieve the same size each and every time. What if you need a series of narrow cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate..
  • The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence..
  • Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn’t exert spring like pressure against the board. This means it can be used to make accurate, repetitive cuts since it’s essentially just holding its spot once it is secured..
Check Stock