Reviews Circuit Board Relay

Aoicrie 5Pcs DC 5V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

  • This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
  • These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
  • Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
  • And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
  • Wide Application These 5V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine /etc..
Check Stock

5v Relay Board Relay Module 1 Channel Opto-Isolated High or Low Level Trigger

  • 【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 5V digital output from your microcontroller..
  • 【Main Specification】- Peak Load of NO Connector: AC125~250V/10A, DC28~30V/10A.
  • 【Adopted SMD Optocoupler Isolation】- The isolation circuit prevent damages to I / O port by relay switch current..
  • 【Wide Application】- These 5v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc..
  • 【Humanization Design On Interfaces】- All interfaces can be directly wired out through the terminals..
Check Stock

Aoicrie 5Pcs DC 12V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

  • This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
  • These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
  • Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
  • And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
  • Wide Application These 12V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine etc..
Check Stock

Youngneer 5v Relay Board Raspberry Arduino Relay Module 1 Channel Opto-Isolated High or Low Level Trigger

  • 【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 5V digital output from your microcontroller..
  • 【Main Specification】- Peak Load of NO Connector: AC125~250V/10A, DC28~30V/10A.
  • 【Adopted SMD Optocoupler Isolation】- The isolation circuit prevent damages to I / O port by relay switch current..
  • 【Wide Application】- These 5v relay board works well with Arduino/ ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc..
  • 【Humanization Design On Interfaces】- All interfaces can be directly wired out through the terminals..
Check Stock

Notebook Three Bullet Holes In Playing Card Ace Of Hearts Journal for Writing College Ruled Size 6 x 9 110 Pages

  • Item 77119 (replaces the old 74618 as of September 10, 2013).
  • What is included: NewUpgraded IQ 2020 Heater Relay Board w/ Jumpers & Shortened Screws for the front cover of the IQ2020.
  • Description: New(New as of 9-10-2013) This IQ2020 Heater Relay Circuit Board is the newest revision for the 2001-2009.5 IQ2020 Control Box. It's....
  • Symptoms this part has failed: No power going to the heater even though the red HTR ON L.E.D. light is lit inside the IQ2020 control box. The heater....
  • Note: In older control boxes, you may encounter that a chip on this new heater relay board prevents the metal guard from seating properly and it may....
Check Stock

MakerFocus Raspberry Pi Expansion Board 4 Channel Relay Board Module Power Relay Module for Raspberry Pi 4B/3 Model B+/Raspberry Pi 3/2 Model B (No Programming Required/Programmable)

  • The product operation guide can be obtained in the product guide and document. This Raspberry Pi expansion board supports Raspberry P.
  • The Relay Board gives your Raspberry Pi board the ability to control high voltage/high current devices, and easily makes normal home appliances become intelligent. Can be accessed programmatically or directly by shell. Up to 4 layers can be stacked..
  • Switch the I2C address of the device through the DIP switch on the circuit board to ensure that the four-layer module gets different addresses, thus avoiding the problem of address duplication..
  • The 4 Channel Relay uses high-quality relay modules combined with the most popular microcontroller technology to communicate with the Raspberry Pi. You can use mulitiple relay modules stacked together to add many channels.
  • The 4 Channel module is very fast, easy to install, and supports multi-language development, making it ideal for smart home projects.
Check Stock

Tuimiyisou Relay Module Board Switch Motor Time Adjustable Delay Relay DC 5V 6V 9V 12V Intelligent Controller Time Adjustable Delay Relay

  • This Relay Delay Switch is easy to use when you are familar with the operation.
  • Relay Board has high precision, stable and reliable performance for your daily use and satisfaction.
  • There are many voltage and time range of the Relay Module for your choice, both "on" time and "off" time are adjustable.
  • Time Adjustable Delay Relay can be widely used on timer operating equipment, machine repetitive test circuit, fish tank intermittent pump, etc.
  • With the Relay Module Controller, your life will be more intelligent and convenient.
Check Stock

Tuimiyisou Relay Module Board Switch Motor Time Adjustable Delay Relay DC 5V 6V 9V 12V Intelligent Controller Industrial Control Components-Module

  • This Relay Delay Switch is easy to use when you are familar with the operation.
  • With the Relay Module Controller, your life will be more intelligent and convenient.
  • Relay Board has high precision, stable and reliable performance for your daily use and satisfaction.
  • There are many voltage and time range of the Relay Module for your choice, both "on" time and "off" time are adjustable.
  • Time Adjustable Delay Relay can be widely used on timer operating equipment, machine repetitive test circuit, fish tank intermittent pump, etc.
Check Stock

AEDIKO 4pcs Relay Module DC 5V Relay Switch 1 Channel Relay Board with Optocoupler Isolation Support High or Low Level Trigger

  • Fault-Tolerant Design: Fault Tolerant Design, Even if the Control Line is Broken, the Relay will not Operate.
  • All Interfaces of Relay can be Wired Out Through the Terminals Directly,Normally Open and Normally Closed.
  • Optocoupler Isolation:1 Channel Relay Board use Optocoupler Isolation that has Strong Driving Ability and Stable Performance ,The Isolation Circuit Prevent Damages to I / O Port by Relay Switch Current.
  • Jumper Design: The Relay Module has a Jumper That You Can Set Rather the Unit State Changes with High or Low Signal. Has Screw Terminals for Relay (NC,C,NO) and for Input.
  • Wide Application: DC 5V Relay Module Works Well with ARM /PIC /AVR /MCU/Raspberry/CNC Machine/ PS4 etc..
Check Stock

XYGStudy Raspberry Pi Expansion Board Power Relay Module for Raspberry Pi 4 3 2 Model B B+ A+

  • Raspberry Pi Expansion Board, Power Relay.
  • The RPi Relay Board gives your Pi the ability to control high voltage/high current devices, easily makes normal home appliances become intelligent..
  • Standard Raspberry Pi 40PIN GPIO extension header, Supports Raspberry Pi A+/B+/2B/3B/3B+/4B and later versions.
  • High quality relays, loads up to 5A 250V AC or 5A 30V DC.
  • Photo coupling isolation, prevent interference from high voltage circuit.
Check Stock

Comidox 1PCS Infinite Cycle Delay Timing Timer Relay Switch Turn ON/OFF Module 0.5s ~ 1000min Dual Time Adjustable AC 110V 120V 220V 230V

  • The timing relay of the closed cycle module has high design precision. It has a wide adjustable time range from 0.5s to 1000min. You can adjust the....
  • With start/stop function, the module enters the infinite loop mode after starting, and the relay works on and off according to the set time..
  • It can be used for reciprocating stroke control, or repeated power-off of equipment and product aging test..
  • Input (start button): Passive switch input, the green light will be on first after starting, and will stay in red after stopping. It is not necessary....
  • The circuit board can only be installed with 2 screws on the long side. The size of the circuit board is too small to fit 4 screws..
Check Stock

Electronics-Salon 8 Channel DPDT Signal Relay Module Board (Operating Voltage: DC 5V)

  • 8 Channel DPDT Signal Relay Module Board, DC 5V Version..
  • FR-4 fiber glass PCB, dual copper layers. Dimensions: 72.5mm x 150mm ( L x W )..
  • RY5W-K high quality signal relays, LED indicator for each relay channel. Darlington transistors circuit driving relay, improve the reliability of action..
  • Pitch 3.81mm / 0.15" screw terminal block, wire range 26-16AWG, strip length 5mm / 0.2", Metric M2 slotted screw..
  • Datasheet: https://images-na.ssl-images-amazon.com/images/I/A1vg1+5HA8L.pdf.
Check Stock

CW QRP Shortwave Radio Kit - CW Transceiver Shortwave Radio Kit

  • The patch device of the main control board has been pre welded and connected to the base plate in the form of stamp hole. The single chip microcomputer adopts pic16f1938, builtin PLL local oscillator, supports crystal oscillator calibration setting, and has its own frequency indication circuit (Seven Segment LED nixie tube is used, the display unit is 1kHz, the photo has color difference, and the actual color is red. The working frequency covers 7.000-7.100mhz, 1kHz or 100Hz steps )..
  • Ta2003 mixer is used for reception, and crystal filter is used for if. After ta2003 multiplication detection, the sound size is adjusted by digital potentiometer and sent to audio active filter circuit. Finally, LM386 drives speaker, and if frequency supports calibration setting..
  • Use 3 bs170 parallel outputs, class E amplification, 12V power supply, output power 5W! Relay switching is used for transceiver, with the function of transmitting delay adjustment to avoid frequent relay switching and improve the isolation of transceiver channel..
  • It has the function of automatically sending call signs, which is very convenient to use. The MCU uses the original code of our store, which can adjust the code speed, sidetone frequency and sidetone size. It can input the call sign by ....
Check Stock