Reviews Chop Saws

Benchmark Abrasives 14" x 3/32" x 1" Aluminum Oxide Type 1 Chop Saw Blade Cutting Wheel for High-Speed Power Saws, Max. RPM 4400, Precise Cutting of Metal Steel Drywall - 10 Pack

  • Benchmark Abrasives 14" x 3/32" x 1" chop saw cut-off wheels are ideal for cutting all ferrous metal, iron, steel, tube, pipe, and light gauge material like drywall studs, etc..
  • The cut-off wheels are manufactured using aluminum oxide material which has a grainy texture that is good enough to cut metals with ultimate precision and perfection..
  • Designed to meet industrial standards, our cut-off wheels are recommended to be used with stationary saws, low horsepower saws, portable saws, and electric chop saws that are made for 14” sized wheels..
  • Efficient chop saw blades are used in various industries like automotive, transportation, mining, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Concord Blades WCB1400T120HP 14-Inch 120 Teeth TCT General Purpose Hard & Soft Wood Saw Blade

  • Professional quality, construction grade for ripping & crosscutiing of thick hardwoods up to 3 1/2" thick and soft woods up to 1" thick.
  • For use on Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws. RPM up to 4,000.
  • Ideal for cutting Hard Wood, Soft Wood, Exotic Wood and Abrasive Wood..
  • Thin kerf allows a smooth finish w/ minimal waste. Lower hook angle improves the surface quality of the cut, increases the feed pressure required..
  • 3.0 mm kerf design, ATB Grind & 15Degree hook.
Check Stock

MASTEC 8 Inch 64 Tooth Circular Saw Blade Anti Kickback Tooth for Wood Cutting with 5/8-Inch Arbor

  • 【Application】:Fast smooth clean cutting and widely used in Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws..
  • 【ATB Tooth】:Alternate Top Bevel Teeth blade ideal for cutting all kinds of wood.Such as Hard Wood,Soft Wood,Plywood,Chipboard..
  • 【Anti-Kickback Shoulder】:For safety reasons,preventing inversion of saw blade during cutting..
  • 【Specification】:8 inch 64T fine finishing wood cutting blade with a 5/8 inch arbor..
  • 【Good Service】:Please contact us if you have any questions about this saw blade.We guarantee the 100% replacement.Any problems will be solved within 24 hours..
Check Stock

Whirlwind USA MGSB 7 1/4 Inch 60 Teeth Circular Saw Blade for Wood,Carbide Cordless Miter/Table Saw Blade,7/8-5/8 Arbor

  • High quality and professional grade for ripping and crosscu tting of thick hardwood to 3-1/2" thick and softwood to 1" thick..
  • The blades can be used on Circular Saws, Table Saws, Miter Saws, Hand Saws and Chop Saws..
  • Ideal for cutting hardwood, softwood, exotic wood and abrasive wood..
  • Thin kerf allwos a smooth finish with minimum waste. Lower hood angle improves the surface quality of the cut and increases the feed pressure..
Check Stock

DEWALT Chop Saw for Cutting Metal, 14-Inch Steel Blade, Cuts 4x Faster (DW872)

  • Multi-Cutter Chop Saw offers versatility by cutting a wide variety of materials including ferrous and non-ferrous metals.
  • Utilizing a carbide-tipped blade of the metal chop saw allows the depth-of-cut to remain constant throughout blade life.
  • The metal cutting saw cuts 4-times faster than chop saws and 8-times faster than portable band saws in 2-inch x 2-inch x 1/4-inch angle iron.
  • 14-inch, 66-tooth, carbide-tipped blade delivers a lower cost-per-cut compared to cutting with abrasive wheels.
  • Specially designed carbide teeth deliver fast, precise, and virtually burr-free cuts reducing the need for preparation grinding and finished cuts that are cool to the touch.
  • Largest capacity in its class with even more capacity than a deep-cut portable band saw (5-3/16-inch round & 4-1/2-inch x 6-1/2-inch rectangular) allowing user to cut a wider variety of different size materials for more applications.
  • Ergonomically designed horizontal handle puts user's wrist in a more comfortable position to help reduce user fatigue and increase productivity.
  • 15 amp / 4 HP motor provides more overload capacity to increase performance and durability.
  • Patented, 45-degree, adjustable Quick-Fence allows for fast and accurate angle cuts without using a wrench.
Check Stock

WEN BL0740 7.25-Inch 40-Tooth Carbide-Tipped Professional Finish Saw Blade for Miter Saws and Circular Saws

  • Features a 7.25-inch diameter (185 mm) and a 5/8-inch arbor (15.875 mm).
  • Ultra-thin 1/16-inch kerf (1.6 mm) provides clean and efficient cuts.
  • Designed with 40 wear-resistant carbide-tipped ATB teeth.
  • Compatible with the majority of 7-1/4-inch miter saws, chop saws, and circular saws.
Check Stock

WEN BL0724 7.25-Inch 24-Tooth Carbide-Tipped Professional Framing Saw Blade for Miter Saws and Circular Saws

  • Features a 7.25-inch diameter (185 mm) and a 5/8-inch arbor (15.875 mm).
  • Ultra-thin 1/16-inch kerf (1.6 mm) provides clean and efficient cuts.
  • Designed with 24 wear-resistant carbide-tipped ATB teeth.
  • Compatible with the majority of 7-1/4-inch miter saws, chop saws, and circular saws.
Check Stock

WEN BL1466 14-Inch 66-Tooth Carbide-Tipped Professional Metal Saw Blade for Mild Steel Cutting

  • Featuring a 14-inch diameter (355 mm), a 1-inch arbor (25.4 mm), and a rating of up to 1450 RPM.
  • Perfect for dry-cutting through steel and metal, including pipes, tubes, angle iron, and other ferrous metals.
  • Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts.
  • Designed with 66 carbide-tipped teeth for general-purpose mild steel cutting.
  • Compatible with 14-inch dry-cut metal saws, chop saws and circular saws.
Check Stock

WEN BL1490 14-Inch 90-Tooth Carbide-Tipped Professional Metal Saw Blade for Thin Steel Cutting

  • Featuring a 14-inch diameter (355 mm), a 1-inch arbor (25.4 mm), and a rating of up to 1450 RPM.
  • Perfect for dry-cutting through steel and metal, including pipes, tubes, angle iron, and other ferrous metals.
  • Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts.
  • Designed with 90 carbide-tipped teeth for general-purpose mild steel cutting.
  • Compatible with 14-inch dry-cut metal saws, chop saws and circular saws.
Check Stock

Lackmond Beast Pro Porcelain Saw Blade - 10 Hard Tile Cutting Tool with Thin Kerf Cutting Edge & 5/8 Arbor - BP10

  • CONTINUOUS RIM CONFIGURATION – For clean and precise cuts wet cuts of porcelain and stone tiles.
  • EXPERT DESIGN – The thin Kerf cutting edge eliminates chipping while cutting. The beast porcelain tile blades are engineered with a reinforced....
  • BUILT FOR THE PROFESSIONAL – This is the ideal diamond saw blade for tile workers, construction workers, carpenters, general contractors, serious....
  • EQUIPMENT – Designed to be used on hand grinders, circular saws, hand held saws and chop saws.
Check Stock

Oshlun LG-M01 Miter and Portable Saw Laser Guide, Miter & Portable Saws , grey

  • Fits Most 7-1/4, 8, 8-1/4, 10, And 12-Inch Miter, Sliding Compound Miter, Chop, And Portable Saws.
  • New Recessed Laser Design To Protect The Laser From Hitting The Material On Deep Cuts.
  • New Brighter And More Accurate Laser Line.
Check Stock

XtremepowerUS 2200W Cutting Chop Saw 15-AMP Power Saw Cuts (14\ inch Blade Included)

  • Multi-Material Cutting - XtremepowerUS saw will cut wood, wood with embedded nails, composite decking, mild steel, plastic & more with one blade.
  • Powerful Motor - High-torque 15 amp motor will easily cut through a variety of materials.
  • Fast & Efficient - Our Electric chop saw spindle lock allows quick and easy wheel changes.
  • Quick-release feature allows major adjustments in less time.
  • Powerful motor in our chop saws delivers precise cutting.
  • Durable & Flexible - Aluminum oxide abrasive cut-off wheel penetrates the toughest metal surfaces, including stainless steel and other ferrous alloys.
  • 14-inch chop saw also cuts steel, pipe, wood, and other dense materials.
  • V-Block Included - Clamping cylinder materials with the included V-Block ensures safe & clean cutting.
Check Stock

WEN BL0760 7.25-Inch 60-Tooth Carbide-Tipped Professional Ultra Fine-Finish Circular Saw Blade with Cool-Cut Coating

  • Features a 7.25-inch diameter (185 mm), a 5/8-inch arbor (15.875 mm), and a 7000 RPM speed rating.
  • Non-abrasive heat-resistant PTFE cool-cut coating prevents workpiece burns for a higher-quality cut.
  • Ultra-thin 1/16-inch kerf (1.6 mm) provides clean and efficient cuts.
  • Designed with 60 wear-resistant carbide-tipped ATB teeth.
  • Compatible with the majority of 7-1/4-inch miter saws, chop saws, and circular saws.
Check Stock