Reviews Chevy 35cam And Lifters

COMP Cams 850-16 OE-Style Hydraulic Roller Lifter Set for '87+ OE Roller SBC and LT/LS Engines.

  • Performance replacement for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks.
  • Decrease friction and increase longevity when directly compared to flat tappet lifters.
  • Accept much more aggressive cam profiles than flat tappet lifters will allow.
Check Stock

NON MDS HEMI Lifters Replacement for 2006-2018 Jeep Grand Cherokee Dodge Challenger Charger Ram 1500 Chrysler 300 5.7L 6.1L 6.2L 6.4L Part 53021720AB 53021720AC 53021720AD 53021720AE NEWZQ

  • [Fitment]- Lifters Compatible With 1994-2005 for Buick Century, 2009-2011 for Buick Lucerne,1994-1996 for Buick Regal, 2002-2007 for Buick Rendezvous, 1994-1998 for Buick Skylark, 2005-2007 for Buick Terraza, 1994-1996 for Chevy Beretta, 1994-1996 for Chevy Corsica, 2005-2009 for Chevy Equinox, 2000-2011 for Chevy Impala, 1995-2001 for Chevy Lumina, 1996 for Chevy Lumina APV, 1997-2010 for Chevy Malibu, 1995-2007 for Chevy Monte Carlo, 2005-2009 for Chevy Uplander, 1997-2005 for Chevy.
  • [Highlight] - It can compensate automatically, which brings convenience to assembly, use and maintenance, labor-saving and time-saving. If your vehicle shows problem as follow: Instead of a knock or ping, a faulty hydraulic lifter will usually make a sound more reminiscent of a tapping sound, our lifter can solve these issues for you..
  • [OE NUMBERS] - JB-2270, LIF328, L2270, VL138, 17120070,HT-2270, 213-1756, LF400, JH1806HL118.
  • [Delivery]- Ship from US STOCK and deliver very fast..
  • [NOTE] - Please make sure to check the fitment and package content before you purchase our product..
Check Stock

Lunati 10120702LK Voodoo 219/227 Hydraulic Flat Cam/Lifter Kit for 262-400 Chevrolet Small Block

  • Performance street cam with excellent drivability. Great replacement for muscle car cams with auto trans. Stock exhaust manifolds and dual plane intake with mild 4 bbl carb. 4X4 and performance marine cam with dry exhaust..
  • 219/227 Duration at .050". 112 Degree Lobe Separation Angle. 0.468"/0.489" Valve Lift.
  • Lunati Cam and Lifter Kits include a camshaft, a set of lifters, instructions and assembly lubricant..
  • More Power Where It Matters - Lunati's Voodoo cams deliver more area under the curve than any other camshaft series..
Check Stock

Sealed Power 1404M Camshaft Bearing Set

  • 【Application】for Chevy G/M LS Engine, LS1, LS2,LS3,LS6, LQ9.
  • 【Cam Bearing Installation Tool】This tool is used to remove and install cam bearings. Professsional cam bearing tool for all LS based engines. This tool is a must when installing cam bearings in big block for Chevys..
  • 【Note】This is a must have for the LS engine builder, you can save time and money by installing your own cam bearings..
  • 【Using Our Cam Bearing Installation Tool】You can remove the old cam bearing and install the new cam bearing like a professional. Easy to install, which helps to keep the cam bearing in the correct position.
  • 【Durable】Made of 45# steel ,maximum durability, the total length is 33 inches, and the end is detachable..
Check Stock

Chevy SBC 350 5.7L HP RV Stage 2 420/433 Lift Cam Camshaft & Lifters Kit Timing

  • Contain all of the necessary pieces to install hydraulic roller lifters in engines with OE hydraulic roller cam.
  • Contains all required hardware and all components are new.
  • Includes lifter retainer, cam retainer, lifter guides and bolts.
  • World's top manufacturer of performance products.
Check Stock

Mr. Gasket 1183 Cam Button Spacer

  • FITS 1978-86 small block Chevy 200-262 & Chevy 90° V6 and 1955-95 small block Chevy 262-400 (except LT1).
Check Stock

Allstar Performance ALL90050 SBC Aluminum Camshaft Thrust Button

  • Camshaft thrust button fits small block Chevy engines with early model flat timing cover.
  • Machining of the cam sprocket may be required.
  • Cam buttons limit lateral movement of the camshaft in engines without cam thrust plates, and reduce friction for free horsepower.
Check Stock

Allstar Performance ALL90052 SBC Aluminum Camshaft Thrust Button

  • Camshaft thrust button fits small block Chevy engines with late model indented timing cover.
  • Machining of the cam sprocket may be required.
  • Cam buttons limit lateral movement of the camshaft in engines without cam thrust plates, and reduce friction for free horsepower.
Check Stock

Camshaft Lifters Kit NON-MDS w/Head Gasket Cover Kit Compatible with Chrysler Jeep Dodge Charger Durango 5.7L Hemi 2009-2018 Part# 53021720BB 53021720AB AKWH

  • 【Package Includes】16 Hydraulic roller lifters with 4 lifter guides..
  • 【Fitment】Replace for 12499225 12595365. Compatible with 1999-2002 Camaro and Firebird 2010-2013 Camaro 1999-2013 Corvette 2004-2006 Pontiac GTO 2004-2007 Cadillac CTS-V 2008-2009 Pontiac G8 2000-2013 Tahoe Yukon Escalade 1999-2013 Silverado and Sierra (4.8L, 5.3L, 6.0L). Fits for GM LS1, LS2, LS3, LS6, LS7, LS9 LSX Engines (4.8L, 5.3L, 5.7L, 6.0L, 6.2L)..
  • 【Function】Reduced valve train noise from startup to shutdown. Close tolerance for low leak-down rates. Fast pump-up and superior high RPM performance..
  • 【Reliable Quality】Tested to ensure that leak down and top end oil flow are within specification. Same size with OE parts, guides hold the lifters tight for working smoothly. It’s good insurance to make sure that you’re not going to have lifter issues cam load issues later on especially if it’s motor pushing high horsepower..
  • 【Install Notes】Before install your lifters make sure to look at the general cleanliness of engine. Soak the lifters overnight in comps break-in oil this will give it really good lubrication on the outside fill up all the needle bearings and you’ll get rid of most of the air in the plunger assembly. Taking some simple precautions to k....
Check Stock

Evolv Launch Crash Pad - Joshua Tree

  • Open size : 56" x 45" x 5" (141cm x 114cm x 12.7cm), Closed size : 28" x 45" x 11" (70.5cm x 114cm x 28cm).
  • 900d Poly and water repellant coated fabric.
  • Adjustable and contoured backpack straps, larger and more cushioned waistband to keep pad/gear weight on hips, a sternum strap to keep shoulder straps in place, and load lifters to redistribute weight off shoulders and onto hips..
  • New quick-release industrial strength metal cam style buckles all around for easy open and close. Includes a huge carpet square to clean shoes..
  • A combination of metal cam style buckles, webbing, and flaps to secure your gear and, or, another pad. Easy access handles to move pads quickly from boulder to boulder without closing the pad..
Check Stock

Elgin PR-15740Q4 High Performance Push Rod (Box of 4)

  • 7.800" Std Length Pushrods Chevy SBC 400 383 350 327 305 283 OEM Replacement.
  • Perfect for any Cam or Rocker upgrades - easy to install.
  • Set of 5/16" diameter push rods in 7.800" stock length that are guide plate compatible. Made in the USA. Set comes with 16 pushrods..
  • These pushrods were used in many of the following small block.
  • Chevy V8 engines as well as many GM, Buick, Cadillac, GMC, Oldsmobile and Pontiac applications that used the Chevy engines. They also fit some AMC and Wrangler V8 engines..
Check Stock

Allstar ALL90055 Roller Bearing Style Camshaft Thrust Button for Big Block Chevy Timing Cover

  • Camshaft thrust button fits big block Chevy engines.
  • Machining of the cam sprocket may be required.
  • Cam buttons limit lateral movement of the camshaft in engines without cam thrust plates, and reduce friction for free horsepower.
  • Manufactured from quality steel material and high quality roller needle bearings.
Check Stock

ProForm Valve Spring Tester, Digital, 1000 lb Range, 1 lb Scale, Springs up to 4 in Tall, Each

  • SPECIFICATION: This is an 8+8 Pieces Set of Brand New Aftermarket Engine Valve Roller Lifters, replacing the hydraulic tappet that does not work or does not work smoothly..
  • MANUFACTURER PART NUMBER: 17122490, 17120735, 17121905, 12499225, 25349994 12564012, 12576400, HL124, H124, H128, HT-2148 JB-2079, HL-2148S, A2148, B2148, 850-16, 10530-16, HL124-16K 77081-61416, 91113, 12639516, 12571595, 12569256 12619820, 12632143, 17122490, 12645725 12680871, HL178, HL177, HL7011S, HT-2303.
  • APPLICATION: LS1, LS2, LS3, LS6, LS7, LS9 LSX Engines.
  • Chevy Silverado 1500 Avalanche Impala Monte Carlo Suburban 1500 Tahoe Trailblazer EXT Avalanche Caprice Camaro Corvette.
  • HIGH QUALITY MATERIALS: Somusen lifters are manufactured from the finest materials and designed for the proper fit and long reliable lifter life..
  • SERVICE: If you have any quality problems after receiving the product, please contact us to solve them..
Check Stock