Reviews Chemical Mounting Bolt

The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500

  • ... 3/16” x 6 7/16” & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
  • This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
  • This has the outlet facing the front. Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. These bolts and spacers are NOT included, but may be purchased at your local hardware store. Common bolt sizes: Two - 5/16" 18 x 2 1/2", One - 5/16" 18 x 3 1/2".
Check Stock

Owigift Carburetor Carb Replaces for DeVilbiss Excell XR2750 XR2750-1 XC2800 XR2500 XR2500-DS Power Pressure Washer 2500PSI 2750PSI 2800PSI 2.5GPM with Honda Engine

  • You are buying (1) brand new Genuine OEM Brass Head Himore Pressure Washer Pump.
  • for units from 2800-3000 PSI. Fits Excell Devilbiss XC2800 XR2750 XR2750-01.
  • Specifications: 2800-3000 PSI/2.4GPM-MAX 2.5GPM Factory Rating Pump Includes Thermal Release Valve Includes Chemical Injector Mounting:.
  • From Main Center Shaft to each mount bolt is 1 7/8" - Center to Center Spacing Between Mounting Bolts is 2 9/16"-.
  • Please , contact with us if you have any questions about models and part numbers.
Check Stock

3600 PSI Power Pressure Washer Water Pump 2.5 GPM 3/4 Shaft for Honda GX200

  • The ROP Shop replacement Horizontal Triplex Pressure Washer Pump.
  • Specs - Maximum Pressure: 3600 PSI, Maximum Flow: 2.5 GPM, Maximum Pump Speed: 3500 RPM. Maximum HP: 6.5 HP, Male Outlet: 22mm Threaded, Standard....
  • Includes - (1) Horizontal Triplex Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Oil Reader.
  • This pump mounts horizontal and MUST have the oil dip stick pointing up when mounted. Pump needs at least 6.5HP to handle PSI. Pump head CANNOT be....
  • Replaces most pumps with 3/4" shaft. The 4-bolt mounting pattern is 2 9/16" center to center.
Check Stock

Game Room Guys Bumper Pool Posts with Rings - Small - Red/White (Set of 12)

  • REPLACEMENT BUMPER POOL POSTS - Pool Bumpers with Rubber Rings.
  • PLASTIC BASE WITH BOLT - Plastic Base Diameter: 1.16" - Bolt Diameter: .24".
  • MOUNTING BOLT - Mounting Bolt at Base of Bumper: #6- 20 x 1.12".
Check Stock

Game Room Guys Bumper Pool Posts with Rings - Large - Red/White (Set of 12)

  • REPLACEMENT BUMPER POOL POSTS - Pool Bumpers with Rubber Rings.
  • PLASTIC BASE WITH BOLT - Plastic Base Diameter: 1.42" - Bolt Diameter: .25".
  • MOUNTING BOLT - Mounting Bolt at Base of Post: #6-20 x 1.10".
Check Stock

BoltHold - SP58 Zinc-Plated Asphalt Anchor 1-1/4 x 10 - with 1.5 Hex Bolt & 2 Washer - Chemical Anchors - for Installation of Sheds Carports Bike Racks & More - 5000 lb Pull Rated - 6 PK

  • ...ion to asphalt mounting. Measuring 10" long, these SP58 Zinc-Plated Steel Anchors incorporate a 5/8"-11 UNC (coarse) female thread and are pre-installed with a 1.5" long bolt and a 2" diameter washer. Set includes 6 anchors..
  • OUR STRONGEST ANCHOR: Pull rated for 5000 lb! Designed for a very heavy load, BoltHold SP58 chemical anchors resist at least 5,000 pounds pull and 2,500 pounds of high shear force at ground level. Rated for >720 in-lb rotary torque, the anchor's welded spiral offers a strong bond with the grout, while the washer at the top prevents the anchor from dropping below the surface or being pulled up into the mounting plate when tightening the bolt..
  • LONG TERM STABILITY: Creates a stress-free bond that lasts! Due to asphalt's weaker nature, typical expansion-type wedge anchors used in concrete won't hold to the pressure. BoltHold anchors solve this problem by embedding deep into the compacted gravel below the asphalt layer to increase the shear resistance and ensure long-lasting stability—perfect for safely installing carports, sheds, speed bumps, signage, lights, parking barriers, and many more asphalt mounting applications..
  • EASY TO INSTALL: BoltHold makes asphalt anchoring a breeze! For quick installation, drill a hole deep into th....
Check Stock

NATGAI 4 Pack Metal Lock Barrel Bolt Spring Loaded Locking Latch 6.5\ Long w/Grip Heavy Duty for Gate Shed Door Tailgate Trailer Garage (4 Pack)

  • 【Specification】: 6.5 Inch long spring bolt - 0.5" diameter round bolt - mounting plate: 1-9/16 inch by 3 inch.
  • 【Heavy Duty】: Constructed of heavy duty metal.
  • zinc coated for rust protection, red handle cover for easy pulling and turning, ultra-durable and corrosion resistant, perfect for indoor and outdoor applications..
  • 【Quick Release】: This spring bolt can lock in the open position, making your life easier. Simply pull back the bolt and rotate in place against the retaining pins - the tension from the spring will hold the latch open. Once you are ready to lock up, simply rotate the handle and the pin will automatically release..
  • 【4 Mounting Holes】: Each unit comes with 4 mounting holes pre drilled for the quickest installation. These mounting holes are countersunk for a flush finish with screws and a semi recessed finish if bolting in place. (Fasteners not supplied).
  • 【Package Included】: 4 x Spring-loaded barrel latches.
Check Stock

BoltHold - AK-4 Asphalt Anchor & Anchoring Cement Kit - Four 1500lb Pull Rated SP10-38 Chemical Anchors 5/8 x 6 with EPX2 Anchoring Cement - For Installation of Sheds Carports Bike Racks & More

  • ...liable solution to asphalt mounting. This AK-4 Kit includes four SP10-38 (3/8"-16 x 6") Zinc-Plated Anchors with a pre-installed 1" long bolt and 1" diameter washer and two bags of EPX2 cement-based Anchoring Grout..
  • LIGHT-TO-MEDIUM LOAD: Pull rated for 1,500 lb! Designed for a light-to-medium load, BoltHold SP10-38 chemical anchors resist at least 1,500 pounds pull and 1,000 pounds of moderate shear force at ground level. Rated for 200 in-lb rotary torque, the anchor's welded spiral offers a strong bond with the grout, while the washer at the top prevents the anchor from dropping below the surface or being pulled up into the mounting plate when tightening the bolt..
  • LONG TERM STABILITY: Creates a stress-free bond that lasts! Due to asphalt's weaker nature, typical expansion-type wedge anchors used in concrete won't hold to the pressure. BoltHold anchors solve this problem by embedding deep into the compacted gravel below the asphalt layer to increase the shear resistance and ensure long-lasting stability—perfect for safely installing carports, sheds, bike racks, signage, lights, parking barriers, and many more asphalt mounting applications..
  • EASY TO INSTALL: BoltHold makes asphalt anchoring a breeze! For quick installation, drill a hole into the asph....
Check Stock

Dometic Sanitation 302310083 310 Toilet Bone Std

  • Straight 2-Bolt Style Toilets - most plastic RV toilet models 210, 110 Domestic/Sea Land models.
  • 4-Bolt Style Toilets - 510 and older models.
  • Requires mounting adapter - sold separately.
  • Angled 2-Bolt Style Toilets - Older RV toilets (models vary).
Check Stock

Dometic 000-13522-001 Sanitation 302310081 310 Toilet White Std

  • Straight 2-Bolt Style Toilets - most plastic RV toilet models 210, 110 Dometic/SeaLand models.
  • 4-Bolt Style Toilets - 510 and older models.
  • Requires mounting adapter - sold separately.
  • Angled 2-Bolt Style Toilets - Older RV toilets (models vary).
Check Stock

SuperATV Black Ops 3500 LB Winch Kit for UTV/ATV | Waterproof Seals and Solenoid | 12 Volt Winch | 1.2 HP Motor | 166:1 Gear Ratio

  • ✔️【 Fits】Our 3500 lb Winch fits most bumpers or winch mounts with a 3.0" x 4.87" (76 x 124mm) mounting bolt pattern | 3.0" x 4.87" (76 x 124mm) mounting bolt pattern | Please Note: Requires machine-specific mounting plate or winch ready bumper (sold separately).
  • 【3500 lb. Winch】Our 3500 lb. UTV Winch is ready to make sure you're not stranded on the trail! | Waterproof seals and solenoid | Powerful Permanent Magnet DC 12V 1.2 HP Motor | 3500 lb. rated line pull Synthetic 50' rope |166:1 gear ratio | SuperATV Winch Dimensions (LxWxH): 12.76" x 4.60” x 4.37" | Brakes to hold the spool on inclines.
  • 【Kit Includes】Black Ops 3500lbs Winch | 50' synthetic rope | Wired dash rocker switch | Heavy-gauge extended wiring and waterproof solenoid (long enough for four-seaters) | Aluminum hawse fairlead—4.3” (109 mm)| Winch mount plate | Winch hook kit | Hook pull strap | Rope stopper | Instructions can be accessed through Manufacturers website or QR code.
Check Stock

Kolpin Stronghold Autolatch

  • Auto-latching design provides quick secure attachment of any Kolpin Stronghold products.
  • Engineered steel bracket for precision angling and attachment to vehicles.
  • Spring loaded latch with stainless steel spring.
  • Durable glass-reinforced nylon auto-latch construction.
  • Includes u-bolts and universal mounting hardware. Included Mounting Hardware: (8) Nylon Lock Nuts, M6-1.0, (8) Flat Washer, M6, (4) U-Bolt, M6-1.0 x 25mm ID x 45mm, (4) Flange Hex Bolt, M6-1.0 x 35mm LG, (1) Mounting Bracket.
Check Stock

8" Pneumatic Swivel Caster with Brake - Black Rubber Wheel - 300 lbs. Capacity - Service Caster Brand

  • The Series 100 pneumatic casters come in 6” (mounting height 7.5”), 8” (mounting height 10”), 8” gray, 10” (mounting height 12.1875”) and 12” (mounting height 13.75”) and are made of pneumatic tread and an inner core filled with pressurized air which remains inflated even with the weight of a vehicle resting on it..
  • Weight capacity ranges from 200 lbs on the 6” caster, 300 lbs on the 8”, 350 lbs on the 10” and 450 lbs. on the 12”..
  • Top plate measures at 4″ x 4 1/2″ with a bolt hole pattern of 2.625″ x 3.625″ to 3″ x 3″ and can either be bolted or welded on..
  • Brake options include top lock brake (TLB), side lock brake (SLB), bolt-on swivel lock (BSL), or combinations of each. The TLB (6, 8, and 10” casters) places a positive locking force against the wheel top, whereas the SLB (12” caster) places the force against the wheel side. The bolt-on swivel lock (BSL) is field installable and converts a swivel caster to rigid for straight-line tracking at any 90 degree angle via a spring-loaded bolt inserted into one of 4 notches found on the swivel raceway..
  • Find other wheel materials, sizes and all Service Caster products at our Amazon Storefront. Click on the “by Service Caster” link a....
Check Stock