Reviews Cheap Loaded Strat Pickguard

Musiclily SSH 11 Hole Loaded Prewired Strat Pickguard Humbucker Pickups Set for Fender SStratocaster Electric Guitar,3Ply White

  • 3ply PVC material made ,11 mouting screw holes, HSS strat style pickguard.
  • 2 single-coil pickups and 1 humbucker pickup with ceramic magnets.
  • 1 volume, 2 tone control knobs and 5 way switch.
  • Come with full set of knobs, switch, pickups and pre-wired circuit.
  • Package Including:1 x Loaded Pickguard Set.
Check Stock

Musiclily Pro 5-Way Guitar Blade Switch Pickup Selector for Import Strat Style Electric Guitar

  • Fits most import Strat style electric guitars, like Squier Strat or other similar style guitars.
  • 5-position, designed to replace the cheap stock switches for most guitars and basses.
  • Mounting screw holes spacing: 41.3mm (1-5/8 inch).
  • Cavity depth required: 29mm (1-9/64 inch).
  • Pickguard slot required: 24x1.95mm (0.945x0.077 inch).
  • Package includes: 1 piece guitar switch with white & black tip and mounting screws.
Check Stock

Jiayouy 3-ply White SSS 3-Ply Loaded Prewired Pickguard Backplate with Single Coil Pickups Set fits for Vintage Strat Stratocaster Style Electric Guitars Parts

  • 3ply PVC material made ,11-Holes standard SSS strat style pickguard. Fit to US/Mexican standard..
  • Pre-wiring is complete with single coil pickup, 5-position pickup selector switch and with push/pull switch on a tone pot..
  • The surface of the product is covered with a film to decrease scratches and damage, peel off after installation..
  • Can be applied to ST Strat or diy electric guitar's parts, please pay attention to the specifications..
  • Package includes: 1pcs strat pickguard, 10pcs pickguard screws..
Check Stock

Dopro 11 Hole Vintage 62 Strat ST SSS Single Coil Pickups Guitar Pickguard Scratch Plate with Screws for American Fender 62 Stratocaster Aged White 3 Ply

  • Please verify the dimension photo before you order the item and this Pickguard fits American Fender 62 Strat perfectly without drilling.If you have other types of Strats, you may need to make a little modification to let it fit.
  • Pickguard is made of plastic, it has plastic films which should be peeled off after installing.
  • Please note the pickup mounting screw holes and switch screw holes are not countersunk.
  • Thickness is about 2.2mm (+/- 0.2mm error, because different bulks materials might be varied different thickness).
  • 11 Free pickguard mounting screws are included.
  • Package includes 1 Strat guitar pickguard and 11 guitar pickguard screws.
Check Stock

Musiclily 11-Hole HSS Prewired Loaded Pickguard with Single Coil Pickups Set for Fender Squier Strat Electric Guitar, 4Ply Tortoise Shell

  • Fits US/Mexico Standard Fender Strat or Squier Strat like Affinity series etc, good replacement or upgrade option.
  • 11-Holes standard HSS strat style pickguard, large back shielding.
  • Standard single-coil pickups, ceramic magnet, wax potted, output: 5.7K ohm for neck and middle, 12.5K ohm for bridge.
  • Installed standard strat style knobs, switch, pickups and pre-wired circuit, included pickguard screws.
  • Please check the wiring map in our product images. White wire is hot, any black wire can be the ground, then other black wire is for output jack's negative electrode.
Check Stock

Musiclily 11-Hole SSS Prewired Loaded Pickguard with Single Coil Pickups Set for Fender Squier Strat Electric Guitar, 4Ply Black Pearl

  • Fits US/Mexico Standard Fender Strat or Squier Strat like Affinity series etc, good replacement or upgrade option.
  • 11-Holes standard SSS strat style pickguard, large back shielding.
  • Standard single-coil pickups, ceramic magnet, wax potted, output: 5.7K ohm for neck and middle, 6.0K ohm for bridge.
  • Installed standard strat style knobs, switch, pickups and pre-wired circuit, included pickguard screws.
  • Please check the wiring map in our product images. White wire is hot, any black wire can be the ground, then other black wire is for output jack's negative electrode.
Check Stock

Musiclily 11-Hole SSS Prewired Loaded Pickguard with Dual Hot Rail High Output Pickups Set for Fender Squier Strat Electric Guitar, 3Ply Black

  • Fits US/Mexico Standard Fender Strat or Squier Strat like Affinity series etc. , good replacement or upgrade option.
  • 11-Holes standard SSS strat style pickguard, large back shielding.
  • Dual hot rail single coil sized humbucker pickups, ceramic magnet, wax potted, 9K ohm high ouput.
  • Installed standard strat style knobs, switch, pickups and pre-wired circuit, included pickguard screws..
  • Please check the wiring map in our product images. White wire is hot, any black wire can be the ground, then other black wire is for output jack's negative electrode..
Check Stock

Musiclily Pro 11 Hole Loaded Strat Pickguard with Alnico 5 Pickups Set for Fender American/Mexican Stratocaster Standard Modern Style, Black 3Ply

  • Ideal for Strat modern American Standard style, 11 mounting screw holes, SSS pickup routine, 3ply black/white/black PVC Material.
  • Neck 6.0K 4.0H, middle reverse wound 6.0K 4.0H, bridge 6.4K 4.5H. Pickup flat top pole, Alnico 5 magnet Pickups.
  • A250K/B250 Pots, 1V2T, 5 ways switch, 223J capacitance.
  • Plastic knobs, switch tip and pickup covers, comes with pickguard screws, completely wired and ready to install.
  • Package included: 1pc Loaded guitar pickguard set.
Check Stock

Musiclily Pro 11 Hole Loaded Guitar Strat Pickguard HSS with Noiseless Alnico 5 Pickup Humbucker Prewired Scratch Plate Set for Fender American/Mexican Stratocaster Standard Modern Style, 3Ply Black

  • Fits USA/Mexico Strat standard HSS routine guitar. 11 Holes, 3Ply PVC pickguard.
  • With Noiseless Alnico 5 pickup set. 3 pickup holes(single coil - single coil - humbucker).Neck 5.6K 4.5H, middle 5.6K 4.5H, Bridge humbucker 14.5K 9.6H..
  • Full black pickup covers, switch tips and knobs parts.
  • Come with full set of knobs, switch, pickups and pre-wired circuit.
  • Package Includes: 1Pc Loaded Pickguard Set.
Check Stock

SSS Loaded Pickguard Prewired Strat Guitar Scratch Plate 11 Holes with Single Coil Pickups Set for Fender USA/Mexican Standard Straocaster Guitar Parts, Cream Yellow 3Ply

  • Strat pick guard and pickups set is suitable for American Fender & classic style electric guitar, SQ, MTM, 11 screw mounting holes in the side of pickguard, please verify the pickguard dimensions when you order the item..
  • The Prewired scratch plate with neck/middle/bridge single coil pickups, ceramic magnet with 250K pots and 5 way switch,volume tone control knobs, 11 screws. It's a great way to save money and easy to build up your solidbody guitar, only need to take a few minutes to wire your output jack and grounding to your guitar bridge..
  • 3 Pickups have bright spanky articulate single coil sound, classic staggered flat fixed pole pieces, sealed humbucker are triple wax dipped and vacuum sealed to eliminate any unwanted feedback and noise. Pickups Resistance: approx. Neck 5.75K.
  • Bridge 6.4K, Pickups Pole Spacing N/M/B: 50mm.
  • 11-Holes standard SSS strat style pickguard is made of 3Ply PVC plastic material, Cream/Black/Cream, 1 layer thin protective film on the front surface of the pickguard, peel off after installation, durable and uneasily damaged when use, PURE aluminum foil shield on the backside, better shielding property and anti-interference..
  • Modified Guitar Tone: These pickups sound fantastic, really clear and musical ....
Check Stock

Seismic Audio Electric Guitar Pickguard SAGA14

  • Designed for Strat style guitars from any manufacturer.
  • Aftermarket replacement for Fender Stratocaster guitars.
  • High quality and easy to install - Great for Luthier projects.
Check Stock

Musiclily 435x290mm Pickguard Blank Material for Electric Guitar Bass Scratch Plate Sheet Custom 4Ply Abalone Shell

  • Ideal for electric guitar bass pickguard DIY. Enough for two Strat, Tele, J Bass or one P Bass pickguard custom.
  • Plastic made, 2.0-2.2mm thickness, easy to cut.
  • Double layers protective films on the top.
  • Package included: 1Pc Pickguard Material.
Check Stock

IKN 8 Hole Strat Pickguard Electric Guitar Pickguard Scratch Plate with Screw for Vintage Style Strat Guitar Parts 4Ply White Pearl

  • 8 screw holes in the side of pickguard, 3 single coil pickup holes were cut to fit American/Mexican Standard Fender Stratocaster..
  • Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: white pearloid / white / black / white..
  • There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation..
  • PURE aluminum foil shield on the backside, better shielding property and anti-interference..
  • Package includes: 1pcs strat pickguard, 25pcs pickguard screws..
Check Stock