Reviews Chassis Dynamometer

HDE Professional Digital Infrared Photo Tachometer RPM Motor Speed Gauge Tach

  • Hand hold design, simply and convenient to operate..
  • Widely used for force measurement in electronics, electrical appliances, hardware, auto parts, chemical industry, pen making, light industry, textile, machinery and other industries..
  • The dynamometer can be mounted on various workbenches, or work with clamping tools..
  • The push pull dynamometer has a dial gauge with analog signal and a 10N capacity..
Check Stock

Hand Dynamometer Grip Strength Trainer - Electronic Hand Grip Strength Tester Grip Strengthener Hand Exerciser Meter Digital Hand Physical Therapy Equipment Training Gauge 265 Lbs / 120 Kgs Measurement for Sport Home School Clinic Use

  • 【Accurate and Precise measurement of Grip Strength from 0 to 265lbs(120kgs)】-【Higher capacity】-Equipped with high precision strain gauge sensor, the hand dynamometer gives you accurate momentary digital reading of gripping power. Measuring Capacity: 265lbs / 120kgs.
  • Division: 0.2lbs / 0.1kgs This is a perfect Hand Dynamometer for physical therapists, occupational therapists, athletic trainers, chiropractors, and general practitioners..
  • 【Efficient Device and Easy to Use】-The display on the handle is simple to read, and the design of this Grip Strength Tester is lightweight. The length of the handles can be adjusted to accommodate different size hands. This Grip Strength Trainer Meter is so much more convenient than the old school manual ones that are hard to read and uncomfortable to use..
  • 【Sturdy and Long-lasting】This Hand Dynamometer is made of high quality materials, which makes it sturdy and long-lasting. If you have been working on improving things with some pull up bars and pulley based exercises, This grip gauge is an excellent metric to use for determining improvement..
Check Stock

DuraGo BP848 C Ceramic Rear Brake Pad

  • Engineered for optimum braking performance and extremely quiet operation.
  • Lowers rotor and pad operation temperatures increasing rotor life.
  • Dynamometer tested for maximum stopping power in a wide variety of road conditions.
  • Shimmed, slotted and chamfered for maximum performance (where applicable).
  • Precision cut backing plates reduce vibration in the brake caliper.
Check Stock

DuraGo BP1042C Ceramic Rear Brake Pad

  • Engineered for optimum braking performance and extremely quiet operation.
  • Lowers rotor and pad operation temperatures increasing rotor life.
  • Dynamometer tested for maximum stopping power in a wide variety of road conditions.
  • Shimmed, slotted and chamfered for maximum performance (where applicable).
  • Precision cut backing plates reduce vibration in the brake caliper.
Check Stock

DuraGo BP1679MS Rear Semi-Metallic Brake Pad

  • Rotor friendly - 100% non-asbestos material.
  • High temperature friction material provides fade free performance.
  • Dynamometer tested for maximum stopping power in a wide variety of road conditions.
  • Shimmed, slotted and chamfered for maximum performance (where applicable).
  • Single layer noise dampening shims are installed during the manufacturing process.
Check Stock

DuraGo BP1086MS Semi-Metallic Rear Brake Pad

  • Made from 100 percent non-asbestos material.
  • High temperature friction material provides fade free performance.
  • Dynamometer tested for maximum stopping power in a wide variety of road conditions.
  • Shimmed, slotted and chamfered for maximum performance (where applicable).
  • Single layer noise dampening shims are installed during the manufacturing process.
Check Stock

Gates 19G3982 G-Force Continuously Variable Transmission (CVT) Belt

  • OEM constructed drop-in belt with no clutching adjustments.
  • Double and single cog configurations to match OEM belt designs maximizing heat control and flexibility.
  • Advanced aramid tensile cords and reinforced fiber loaded under cord are used in construction for durability and dependability.
  • Tested under extreme conditions in controlled environments as well as on race vehicles.
  • Dynamometer testing proves G-Force belts outlast other high-performance belts by as much as five times.
Check Stock

OHAUS 80000018 8008-MN Pull Type Spring Scale, 5000 g/50 N Capacity, 100 g/1 N Readability

  • Both rings and hook are plated and each can be zeroed with the metal nut located at the tops..
  • Each scale has a ring at the tos for hanging, and an s-hook at the bottom for attaching the sample to be weighed..
  • Clear plastic housing allow observation of the extension and retraction of the spring..
  • This spring scale have a clear plastic body that is calibrated in both gram and newton..
  • The dynamometer is used for gravity and tension measurement..
Check Stock

Rislone Hy-per Fuel Complete Fuel System Cleaner Gas

  • Six in one: equal to a bottle of regular injector & complete fuel system cleaner, upper cylinder lubricant, fuel stabilizer and conditioner, dry gas, gas treatment and octane booster.
  • Increase power and performance: boosts octane, power, performance and mileage, stabilizes gas, lubricates and protects.
  • Save gas: cleans and lubricates the complete fuel system.
  • engine dynamometer tests show improved fuel economy.
  • Run smoother: helps eliminate noisy injectors and fuel pumps, rough idle, hard starting and hesitation.
  • regular use provides reduced fuel system and emission control repairs..
  • EPA registered: will not void manufacturer’s new vehicle warranty and safe to use on vehicles with oxygen sensors and catalytic converters.
  • exceeds epa compliance performance criteria and is epa registered.
Check Stock

HiLetgo GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Module for Arduino IIC/SPI Transmission

  • 【What You Get】: You will get: a whole complete robot tank car chassis named as T900 = 2 sets of T300 tank car chassis, which including mainly: 4pcs DC encoder motors, 4pcs plastic tracks, 5 parts of metal frame, 40pcs bearings, a bag of screw kits and other parts. These Parts are UNASSEMBLED, and You can download the T300 car chassis (since T900=2sets T300) manual in this link to assemble it..
  • 【Large Size & Big Load】: As for the whole robot chassis, ONLY the track is engineering plastic track, all of the others are metal, and thus the structure is very solid, which can be loaded about 0-6kg. T900 car chassis is also have large size, about L*W*H=550*280*110mm. So, this car chassis is used for VR video monitor or tracking..
  • 【Personal Novel Design】The robot car chassis is designed up to date. The track or caterpillar is adjustable to suit for the length of the car chassis, and each load bearing wheel is encapsulated with 2pcs bearings, which can reduce the friction of wheel. The assembling manual can be downloaded from this link or at gitnova..
  • 【DC Encoder Motor】: This encode motor can be used for the speed measurement / test. For example, if you let the car moving forward along a line, you should fully use the speed difference about two mo....
Check Stock

Run-Rite G.D.I Preventative Maintenance Kit - Fuel System Cleaner for Gasoline Direct Injection Engine, Valves, Induction Components & Fuel Injector Cleaner Kit - Clean Carbon & Fuel Deposits - 2 Kits

  • Six in one: equal to a bottle of regular injector & complete fuel system cleaner, upper cylinder lubricant, fuel stabilizer and conditioner, dry gas, gas treatment and octane booster.
  • Increase power and performance: boosts octane, power, performance and mileage, stabilizes gas, lubricates and protects.
  • Save gas: cleans and lubricates the complete fuel system.
  • engine dynamometer tests show improved fuel economy.
  • Run smoother: helps eliminate noisy injectors and fuel pumps, rough idle, hard starting and hesitation.
  • regular use provides reduced fuel system and emission control repairs..
  • EPA registered: will not void manufacturer’s new vehicle warranty and safe to use on vehicles with oxygen sensors and catalytic converters.
  • exceeds epa compliance performance criteria and is epa registered.
Check Stock

Dilwe RC Steel Chassis Frame Rails Spare Part Fit for AXIAL SCX10 90027 SCX10 II 90046 90047

  • Fit forThe chassis frame rails is compatible with AXIAL SCX10 90027 SCX10 II 90046 90047 RC crawler.
  • Include Left and RightThe chassis frame rails is included two chassis frame rails, a left and a right..
  • High-qualityRC car chassis frame rails is made of quality material, sturdy and durable, suitablr for daily use, ensure long serve time..
  • Upgrade PartThe chassis frame rails is a set of great upgraded accessory for you favorite model car..
  • Easy to CarryThe chassis frame rails is lightweight and compractical, easy to install and remove..
Check Stock

BMZX Tesla Model 3 Skid Plate Front Chassis Guard Plate Aluminum All Weather Heavy Duty Protection

  • Customized for the front chassis guard plate of Model 3.
  • Protecting the motor and strengthen the protection of the connected battery coolant pipe..
  • Why we need to replace: The original resin chassis guard plate is very vulnerable to damage, a slight collision is likely to damage the internal motor. If the chassis protection plate is broken, we will face high repair costs, but using our aluminum alloy chassis guard plate can avoid this situation..
  • Main functions: Prevent motor from being damaged by impact, anti-scratch, anti-abrasion and anti-corrosion.
  • No need to worry about chassis damage, all-weather protection motor, driving more peace of mind..
  • Durable Material: aluminum alloy with strong thermal conductivity, thickness of about 2.7mm, with heat dissipation and anti-impact performance far beyond the original resin chassis guard plate.
  • Installation: Screw hole is customized according to the original resin chassis guard plate, alignment hole can be directly replaced with the new one. Easy no-drill installation uses vehicle’s existing attachment mounts.
Check Stock