Reviews Chamfering Router Bits

SpeTool Carbide Chamfer End Mill V Groove Router Bit 60 Degree, 4 Flutes 1/4 inch Shank for CNC Carving and Chamfering

  • Chamfer End Mill With 60 Degree, 1/4" Shank Diameter, 2" Overall Length..
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End..
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface..
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55..
  • V Groove Router Bits Can Be Used in CNC, X carve, 3D carving, Router Hand And Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets..
Check Stock

THINKWORK Compact Router, 6.5-Amp 1.25 HP Compact Wood Palm Router Tool Kit, Wood Trimmer with 15 pieces 1/4

  • ...ssing is fine. Straight guide, thicker models are stable and not deformed, straight processing is stable. You can tighten the router bits with the wrenches..
  • Wide ApplicationThis wood compact router is widely used in wood processing, cabinet processing, handicraft production, wood veneer, and other similar materials chamfering, grooving, surface finishing, curve cutting, planing wood edge, pattern processing operations activities, DIY..
  • What You Will Get15 pieces 1/4" shank router bits set(Bonus Gift!), 1x 110V compact router, 10 x sandpapers, 1 x 1/4" to 1/2 " router collet, 1 x straight guide, 1 x guide plate, 1 x trimming guide, 2 x wrenches, 6 x carbon brush, 1 x bolt, 1x screw, 1 x manual, and our easy-reach customer service..
Check Stock

SILVEL Compact Router 6.5-Amp 1.25 HP Compact Wood Palm Router Tool Hand Edge Trimmer 30000R/MIN 800W 110V with 15 pieces 1/4 Router Bits Set

  • 【Premium Quality】This electric Wood Router built-in 800W strong copper motor,The speed (30000 RPM) will provide enough power to finish the....
  • 【High Accuracy】The compact router kit can be used under normal environmental conditions. The transparent cover controls flying sawdust and gives....
  • 【Abundant accessories】It contains a variety of accessories, such as wrenches, carbon brushes, trimming guides, linear guides, etc. The linear....
  • 【Wide Use】Widely used in woodworking, cabinet and furniture processing, chamfering, grooving, surface treatment, woodworking planning, DIY crafts....
  • 【What You Will Get】15 pieces 1/4" shank router bits set(Bonus Gift!), 1x 110V compact router, 1 x straight guide, 1 x trimming guide, 2 x....
Check Stock

JERRAY Chamfering Mill Carbide with TiAlN Coated 4 Flutes 90 Degree V-Groove Chamfer End 1/4 Diameter

  • Type: Chamfering router bits / Brand Name: JERRAY Tools.
Check Stock

JERRAY Chamfering Mill, Carbide with TiAlN Coated, 4 Flutes, 60 Degree V-Groove Chamfer End, 1/4\ Diameter

  • Type: Chamfering router bits / Brand Name: JERRAY Tools.
Check Stock

110V 800W Palm Router Electric Hand Trimmer Wood Router 1/4" Collets Woodworking Tool Laminate Trimmer + Tungsten Carbide Router Bits 15-Piece Set

  • 【Power Design】 The input power 800W, 30000RPM speed, router tool motor delivers abundant power for routing and trimming applications..
  • 【Tungsten Carbide Router Bits】 Comes with wooden index case for easy storage and organization. Perfect for edging, trimming, veining and grooving in all woodworking projects for both professional carpenters and hobbyists..
  • 【High Accuracy】 Transparent base of the router for woodworking is good for clear view of the trimming edge, easy to operate. Transparent base design is great for accuracy easily recognizable in processing..
  • 【Stable and Not Deformed】 The Trimming guide, roller running along the curve, ensuring cutting is exact, curve processing is fine. The straight guides are stable and not deformed. The wood trimmer is made with high quality aluminum and plastic, which is durable to use. With lift knob, the scale can be adjusted as you want..
  • 【Widely Application】 This compact router is widely used in wood processing, cabinet processing, handicraft production, plastic sheeting, wood veneer and other similar materials chamfering, grooving, surface finishing, curve cutting, planing wood edge, pattern processing operations activities and DIY..
Check Stock

Router Bits 1/4 Shank, Router Bit Set 15 Pcs, Roundover Router Bit 1/4 Shank - Carbide Router Bits for Wood, Woodworking, DIY

  • ✎[Router Bit Set] - 100% brand new and good quality router bits 1/4 shank boasts alloy blade, balanced craftsmanship and a solid hardened steel board with anti kickback design ensures safe installation. Rigid router bits carbide are all have a hardened solid alloy steel construction with Build-up & heat resistant Teflon coating, Carbide Edge for durability and longevity. These wood router bits set can withstand some heavy duty use and the test of time.
  • ✎[Perfectly Matched Router Bits] - 1/4 shank router bits set precisely match the requirement of the American dimension and standard. Each router bit has a 1/4-inch universal shank which fits all models of routers, carbide router bits 1/4 shank is compatible with all major router instrument (either handheld or benchtop router table) such as MNA, Kowood, Bosch, DeWalt, Makita, Tooldo, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker.
  • ✎[Great Value 15 Piece Router Bits Set] - Precisely machined sharp YG8 tungsten carbide blade makes clean and accurate cuts on all types of wood, Cutters (C3 Micro-grain Tungsten Carbide) to slice smoothly into stock, clean, splinter free, prominent advantages in practical use. Select bits featuring a bearing roller for smooth and aligned operations. Well-construct....
Check Stock

Compact Wood Palm Router Tool Hand Trimmer Woodworking Joiner Cutting Palmming Tool 30000R/MIN 650-800W 110V with 12PCS 1/4" Router Bits

  • 【Beginner's power tool】 The 3000rpm copper motor with no load speed can provide maximum power to meet the most severe woodworking applications. It has high-quality plastic, power switch and high-quality rubber handle with anti-skid pad. Get out of DIY like a beginner..
  • 【Purpose】 It can be widely used for chamfering, grooving, trimming, drilling, carving characters, arranging processing, etc..
  • 【What's in the Box】- 12PCS 1/4" Shank Router Bits Set【Including 6mm/12mm/16mm Straight bits,12.7mm 90°"V" Grooving bit,12.7mm Dovetail bit,32mm 45°Chamfer bit, 12.7mm Dovetail bit, 32mm 45°Chamfer bit, 12.7mm Flush trim bit,R6.3mm/R9.5mm Round over bit, R6.3mm Core box bit,R6.3mm Core bit,R4mm Roman ogee bit.】 1x Palm Router, 1 x Straight Guide, 1 x Trimming Guide, 2 x Wrenches, 6 x Carbon brushes, 1x Sample Guide Plate, 1 x Adjustable Button, 1 x Fast Switch Button, 1 x Manual..
Check Stock

Router Bit Storage Tray - Foam Material for Safe Router Bit Storage, 1-5/16 inch Thick and Stores 60 1/4 inch and 50 1/2 inch Shank Router Bits

  • We have all experienced the same issue. We start collecting router bits and little by little we realize that we have nowhere to put them. To even further complicate things, our router bits are both 1/4″ and 1/2″ shanks!.
  • We could always make our own storage out of a piece of wood, but the problem with that is the wood, wears and starts to slip after a while..
  • The 1-5/16″ thick foam router bit tray is a perfect storage solution for all those heavily used router bits that are currently in your drawers, on your shelves or in the router itself..
  • The foam router bit tray fits up to 50 each 1/2″ and 60 each 1/4″ shank bits giving you the ability to store up to 110 router bits in one convenient spot. The holes in the tray wrap neatly and snuggly around the bits to keep them from moving around and keep them out of harms way..
  • Wether you have 100 router bits or just a few, the foam router bit tray is and economical and effective way to keep your bits safely stored away when not in use. ROUTER BITS NOT INCLUDED.
Check Stock

Flytuo 6PCS 90 Degree V Groove and Round Nose Router Bit Set 1/4 Shank, Carbide 3D CNC Signmaking Lettering Engraving Router Bit, Woodworking Carving Cutting Tools

  • Durable Material&Construction: These V Groove Router Bits and Round Nose Bits, are made of high-quality tungsten steel alloy and high-tech special grinding process, whose blade has high strength and hardness, sharp and wear-resistant.
  • Precision&Neat Cuts Every Time: Including 3Pcs 90 Degree V-Groove Router Bits + 3Pcs Round Edge Groove Router Bits, smooth and no burrs, 6 pieces in total makes clean and accurate cuts on wood.
  • Versatile Woodworking Tool Kit: Complete your hardwood tool collection with 3Pcs 90 Degree V-Groove Router Bits and 3Pcs Round Nose Groove Router Bits.
  • Package Included: 3Pcs 90 Degree V-Groove Router Bits - 1/4" Shank, Cutting Diameter: 1/4", 3/8", 1/2".
  • 3Pcs Round Nose Groove Router Bits - 1/4" Shank.
  • Widely Applications: These tongue and groove router bit set is truly versatile for your extra convenience. Works great with woods, MDF, particle board, plywood compact panel. DO NOT cutting ferrous metal and non wood materials, such as: steel, iron, sand, etc.
Check Stock

42950 1/2- inch Router Collet Fit for PORTER CABLE models, Delta, B&D

  • ⭐Features: | For use with 1/2" shank router bits | 1/2" Router collet for use as a replacement or adapter.
  • ⭐Auto-release design prevents "frozen" bits | Accepts 1/2" shank router bits | Auto-release design prevents router bits from sticking in the router.
  • ⭐Designed to minimize bit run-out and enhanced robustness | Helps decrease the amount of lost bits.
  • ⭐Specifications: | Material: Steel | Color: Black | Diameter(in): 0.5" | Outside Diameter(in): 0.5".
  • ⭐Collet Nut size: 1/2" | Length(in): 1.5" | Threads: 20tpi.
Check Stock

ASZLBYM 3/4\ Right Cutting Lathe Indexable Turning Tool Holder MWLNR2020K08 with WNMG432 Carbide Turning Insert

  • Top quality indexable lathe bits with replaceable tips. Inserts can be rotated to a new cutting edge without changing the position of the tool holder!.
  • Set includes 5ps precision 1/4" shank tool bits with C6 carbide inserts, 5ps spare insert screws,2ps wrenches , 1ps wood case and 1ps blade..
  • 2 Pcs. style "A" 0° for turning, facing, boring, and chamfering (AR & AL).
  • 2 Pcs. style "B" 15° for turning, facing, boring, and for lead angles (BR & BL).
  • 1 Pc style "E" 30° for turning, facing, boring, chamfering, threading, and V-grooving.
Check Stock

SKIL SRT1039 Benchtop Portable Router Table

  • ABOVE THE TABLE ROUTER LIFT: Gain convenient access to router bits with the Above Table Adjustment provided by the SKIL SRT1039 all-inclusive Router Table.
  • INTEGRATED BIT STORAGE: Protect and store router bits with a double door, quick latch integrated bit case. This integrated bit storage saves you time and provides a central location for easy to lose bits.
  • PRECISION ROUTING: Router tool features a flat laying aluminum miter gauge slot, aluminum mounting plate, router clamp, and two featherboards for durable, accurate routing.
  • LARGE ALUMINUM FENCE: The tall 16-inch aluminum fence measures 24 inches wide and can handle tall stock with ease, while the fence is complete with adjustable MDF face plates and a starter pin and guard for smooth operation with taller work pieces.
  • TWO FEATHERBOARDS: Two easy to use, adjustable router edge guides attach to the fence and router table to provide additional guidance and protection against kickback.
  • ROUTER CLAMP: Allows you to easily access tools attached underneath the table.
Check Stock