Reviews Center Punches

ABN Hole Transfer Punch Set for Steel, Wood, Etc – SAE Transfer Set – 28 Piece Transfer Punch Set 3/32 to 17/32in

  • ELIMINATE GUESSWORK: Use the ABN | 28-Piece Transfer Punches Set 3/32-Inch to 17/32-Inch to remove the guesswork of where to place the center punch mark in a hole when transferring dead center from threaded, drilled, tapped, and reamed holes.
  • For toolmakers, machinists, fabricators, and hobbyists to use on metal, wood, and other surfaces.
  • Useful for a tool for die marker or repair, finding rifle stock screw and bolt hole locations, and even rock painting.
  • PERFECT SIZES: 4-7/8-inch (12.4cm) length of each punch with 0.0025-inch undersize for easy use.
  • Standard imperial SAE sizes include 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 11/64”, 3/16”, 13/64”, 7/32”, 15/64”, 1/4”, 17/64”, 9/32”, 19/64”, 5/16”, 21/64”, 11/32”, 23/64”, 3/8”, 25/64”, 13/32”, 27/64”, 7/16”, 29/64”, 15/32”, 31/64”, 1/2”, 17/32”.
  • BUILT TO LAST: Constructed from heat-treated tempered steel with a black oxide finish for maximum strength and longevity that resists corrosion and prevents rounding, mushrooming, or chipping of the conically-shaped (cone) tips.
  • Flat ends are slightly chamfered at the edge.
  • We recommend using these pieces as transfer punches – not intended to take place of a center punch.
Check Stock

Amazon Basics 16-Piece Chrome Vanadium Steel Punch and Chisel Set with Storage Pouch

  • 16-piece woodworking punch and chisel set includes 3 cold chisels, 5 taper punches, 5 pin punches, 2 center punches, and 1 chisel punch gauge.
  • Heat treated, chrome vanadium (Cr-V) alloy steel construction.
  • Comfortable handles reduce hand strain and improve accuracy.
  • Storage pouch with velcro closure keeps tools organized and secured.
Check Stock

Chiloskit 28 pc 3/32\ - 1/2\ Transfer Punch Set Machinist Tools Punches Machinist Thread Kit

  • 28-pc. CENTER PUNCH Set Steel Transfer Punch Machinist Thread Tool Kit Set.Heat treated, carbon steel construction.Black oxide finished for durability..
  • EASY TO USE: Select one of the punches, hold punch shaft with one hand while gently tapping a hammer (not included) on the flat top of the punch to make a mark on your selected material that is visible for your center punch, then use your existing center punch (not included) to make a dimple.
  • Eliminates guesswork when transfering threaded, drilled or reamed holes in sheet metal..
  • Eliminates the guesswork when transferring punches through holes.A transfer punch set is a punch set in an index with a specific outer diameter that is non-tapered and extends the entire length of the punch, except for the tip. It is used to tightly fit the tolerances of an existing hole and when struck precisely transfers the center of that hole to another surface..
  • 4-7/8" long: 3/32" to 1/2" by 1/64" increments, handy 17/32"punch.
Check Stock

Stamp-n-Storage Lock-Down Punch Holder - Standard

  • Actual Size: 19” Wide x 13-1/4” High x 4-3/4" Deep | Standard Holder includes 40 compartments..
  • Space is provided for the different sizes of punches, from small to large. Compartments vary in size: the middle column is 4" Wide and the remaining are 3-1/4" Wide.
  • all rows are 1-1/2" High. Dividers can be removed for storing larger punches or other accessories (except for the center divider which is glued in place to improve product strength and stability)..
  • Spacer blocks are included to prevent the smaller punches from being pushed to the back of the opening. Eliminate guessing which punches you already have – you’ll always be able to see them.
  • Made of Birch Plywood - product will arrive pre-assembled, sanded smooth, and in it's natural wood color..
  • Crafted with care in Minnesota, USA. All Stamp-n-Storage products are designed to work great together as a system. With a common design and product sizing, you can mix and match a variety of items and create a custom storage and display solution for your space..
Check Stock

Heavy Duty Automatic Center Punch with Hardened Steel - Pack of 2 Premium Universal Metal Hand Tool for Machinists and Carpenters Spring Loaded with Adjustable Knurled Cap and Hard-Shell Carry Case

  • 5-INCH - PREMIUM AUTOMATIC CENTER PUNCH: Make it easier to drill automatic hand punch tool with a spring-loaded mechanism that works and makes a solid mark in wood, metal, steel, aluminum, brass, copper and more. The Sandor Tool Heavy Duty Automatic Center Punch Includes 2 Automatic Center Punches in a Zippered Hard Shell Storage Case.
  • ONE-HANDED OPERATION. NO HAMMER REQUIRED: Strike Once and Done. These premium center punches offer one-hand operation when marking hole centers with precision and accuracy. Press down on the punch handle to mark hole centers. Now you will be able to start the pre-drilling process or make reference marks with ease.
  • HARDENED ALL-STEEL CONSTRUCTION: Our automatic center punch is made of hardened steel and has a deeply knurled surface which means that it will not slip while offering more precise handling and control. Long lasting fine point tip. Overall Dimensions Measure 5" x ½-Diameter Shank.
  • ADJUSTABLE TENSION: The Sandor Tool Automatic center punch forms a large enough dimple to "guide" the tip of the drill. For lighter marks simply release some tension by unscrewing the end cap. When fully unassembled the point can be removed for sharpening or replacement.
  • TRUSTED BRAND. WE STAND BY OUR PRODUCTS: When others talk quality....
Check Stock

NEIKO 02623A Cold Chisel and Punch Set | 12 Piece | Cr-V Steel | Remove Pins and Bushings | Cut or Split Steel Objects

  • [PREMIUM]: This chisels in this set come with tempered tips that are hardened for extra sharpness making it a great addition to your tool collection cutting or shaving..
  • [QUALITY]: The heavy-duty cold chisel set is constructed from drop forged chrome vanadium steel for extra strength and durability that will ensure the longevity and long-lasting service life of this tool set at home or job..
  • [VERSATILE]: This set is great for craftsman and includes a variety of chisels and punches for a wide variety of work including marking, punching, scoring, and more..
  • [CONVENIENCE]: This tool set comes in a heavy-duty canvas pouch that neatly rolls away to save space and keep your tools organized in your toolbox..
  • [INCLUDES]: Six cold chisels, three taper punches, two center punches, and one pin punch that are all hex shaped for great grip under hammering..
Check Stock

General Tools Round Shank Center Punches #SPC74 Set of 5 from 1/16 in to 5/32 in.

  • POINTS: Points are ground to size for maximum strength and penetration..
  • DURABLE: Made from hardened and ground alloy tool steel, these durable punches are built for a lifetime of dependable use..
  • CLEARLY MARKED: Knurled bodies are stamped with size for quick identification..
  • UNLIKE AN AUTOMATIC CENTER PUNCH: These punches will not skip or bounce when struck, providing spot-on accuracy..
  • IDEAL FOR: Driving objects and nails or making a dimple in a work piece where you intend to drill a hole..
Check Stock

Mayhew Pro 24004 5/8-Inch Center Punch Black

  • Sturdy material: the automatic center punch is made of solid and durable brass, come with deep knurling on the surface, which helps offer more accurate handling and control by one hand.
  • Package includes: you will receive 4 pieces automatic center punches in the package with 2 different colors, each color has 2 pieces, as picture shown, you can use or replace them for a long time.
  • Repeatable impact: 5 inch spring loaded automatic center hole punch can mark a dimpled starting point, the red adjustable impact cap is made of ABS plastic, can be increased or decreased striking force, the good spring can support repeatable impact.
  • Broad use: automatic center hole punch is suitable for a variety of tasks, ideal use for marking, punching, pricking and scribing on wood, metal, glass, plastic, leather or wall surface and so on.
  • Using steps: mark the center of the hole you want to make, and press the handle firmly, the strong spring will pop up the punch strongly, after the punch is pressed back into the rod for a short time, it will leave a mark of the hole on the item.
Check Stock

4 Pack 1/32, 2/32(1/16), 3/32, 4/32(1/8) Nail Setter & Center Punch Set-Harden Alloy Steel (Black)

  • HIGH HARDNESS MATERIAL: The nail set is made of high hardness alloy steel, which is very sturdy and durable for professional application..
  • SIZE: 1/32", 2/32"(1/16"), 3/32", 4/32"(1/8").
  • CENTER PUNCH FUNCTION: Mark the center of a point, It is usually used to mark the center of a hole when drilling holes..
  • PUNCHES FUNCTION: Drive objects, such as nails, or to form an impression of the tip on a workpiece..
  • FEATURES: Raised Shaft For Better Grip. Sets nail heads below wood surface for a smooth finished look..
Check Stock

Punch And Chisel Set, 16 Pieces- Includes Taper Punches, Cold Chisels, Pin Punches, Center Punches, Chisel Gauge, and Storage Case- By Stalwart

  • ...Y TO STORE AND CARRY- The cloth roll up carry and storage pouch will keep your chisel and punch set safe, secure, and organized until your next use. The carry case also makes for easy transport and storage of the tools..
  • SET INCLUDES-  The 16-piece set consists of 5 taper punches.
  • 3/32”x5 1/4”, 1/8”x 5 ¾”, 5/32”x6”, 3/16”x 6 ¼”, 1/4”x 6 ¾”. 3 Cold chisels: 3/8”x 5 ½”, 1/2”x 6”, 5/8”x 6 ½”. 5 Pin punches.
  • 3/32”x 4 ¼”, 1/8”x 4 ¾”, 5/32”x 5”, 3/16”x 5 ¼”, ¼”x 5 ¾”. 2 Center punches.
  • 1/8”x5”, 3/16”x 6” and 1 chisel gauge. Hardness 54~58 HRC..
  • SATISFACTION – Stalwart is committed to providing consumers with the absolute best price and value on our entire line of products. NOTE: This is an exclusive product of Stalwart and ONLY Chisel and Punch Sets by Stalwart are to be genuine.
Check Stock

NEIKO 02638A 5-Inch Automatic Center Hole Punch, Adjustable Impact Spring-Loaded Puncher Tool

  • CENTER HOLE-PUNCH TOOL: Our 5-inch automatic center punch tool is a great tool for working with materials like wood, plastic, metal, glass, and leather. Each center tool is spring loaded with an adjustable stroke and cap that accommodates any project..
  • COMPACT STEEL TIP: Center punches are important when it comes to marking an accurate drilling location. With the spring-driven action and hard steel awl tip, our hand-held puncher lets you mark drill holes anywhere while on the job..
  • HEAVY DUTY WITH IMPACT: This chrome-plated shank body withstands intense impact force, and the metal resists corrosion and damage over time. The reinforced S2 steel tip holds up to hard materials and makes surfaces ready for any nail or drill..
  • EASY USE & GRIP: With a nonslip surface and a precision-centered tip, this center metal punch has increased force control for accurate holes every time. Activate this tool with a firm downward push to achieve the exact size hole you need..
  • ALL-IN-ONE CENTER PUNCH: This spring-loaded glass breaker and center punch tool is suitable for all kinds of tasks. Whether you need a window hole puncher, an awl for leather belts, or a metal hole punch, this efficient tool gets the job done right..
Check Stock

LOVEINUSA Airplane-Shaped Hole Punches and 6PCS Hole Punch

  • Super Value Pack - Airplane-Shaped Hole Punches and 6PCS Hole Punch.
  • Premium Quality - Our hole punches are made of high-grade zinc alloy and ABS. Our hole punches are firm and durable, lightweight, nontoxic and odorless, children can safely use our airplane-shaped hole punches. Warm Notice: In order to press the complete pattern, it is recommended to use thin paper, thick paper is not suitable..
  • Safe and Children-Friendly - The airplane-shaped punches can attract children's attention. The sizes of the airplane-shaped hole punches are only 2 inches. Not only for the adults to use, our airplane-shaped hole punches are also very suitable for children's little hands. At the same time, we specially designed a narrow slot to avoid hurting your little one's fingers..
  • Easy to Use - The airplane-shaped hole punches are designed with a spring button for easy use. You can just use a little bit of effort to press out a perfect pattern from our hole punches. The convenient designed labels on the punches allow you to easily find the shape you want..
  • Wide Applications - The hole punches are suitable for DIY crafts, nail decoration, scrapbooks making, photo albums, envelopes, greeting cards, gift wrapping, etc. You can make your one-of-a-kind DIY craft by using our air....
Check Stock

ALLY Tools Super Strong 6 Inch and 5 Inch Heavy Duty Automatic Center Punch Perfect Automatic Center Punch for Metal Wood Plastic Glass and Marble – Features Spring Loaded Center Punch Design

  • [ADJUSTABLE IMPACT TENSION]: Automatic Center Punch features adjustable impact strength, adjustable spring tension for light or heavy strokes,....
  • [DURABLE CONSTRUCTION]: Each Center Punch is Chrome plated shank body withstands high impact force and resists corrosion.
  • [COMFORTABLE]: Automatic Center Punches Knurled non-slip surface and precision centered tip increase control for more accurate and precise holes..
  • [VERSATILE]: Set of 6” & 5” Center Punch ideal for leaving sets at your home, garage, and tool box. These are the best Automatic Metal Center....
  • [100% GUARANTEE]: In the rare occasion you are not completely satisfied with your purchase, ALLY Tools and Parts will refund or replace your order....
Check Stock