Reviews Center Angle Finder

Digital Angle Finder Protractor 0-360 Degree T-Bevel Gauge & Protractor with Horizontal Vertical Bubble & Full LCD Display for Woodworking, Metalworking, Construction

  • Four Large Control Buttons: Pressing hold button on the digital angle finder to hold the measurement at any angle, it helps the users effectively record the angle values. In addition, including power on/off, read reverse angle, flip display, and clear readout..
  • Digital Sliding T-bevel: Turn the center knob to lock the angle, and use the protractor to copy any angle from 0 to 360 degrees, In addition, easily get 45 degree angle with a T bevel gauge..
  • LCD Display & Bubble Level: This highly protractor tool is equipped with a large LCD display for easy reading and integrates a steel locking knob for adjustment. There is a perfectly positioned bubble level on the end of the digital angle finder body to ensure the level before tracing any angles and making any cuts..
  • Worry Free Customer Service: We back each T bevel gauge with a free 1 year exchange service plus lifetime technology support, giving you complete peace of mind. Please don’t hesitate to contact us for support or questions..
Check Stock

Digital Angle Finder Protractor 0-360 Degree T-Bevel Gauge & Protractor with Horizontal Vertical Bubble & Full LCD Display for Woodworking Metalworking Construction

  • Four Large Control Buttons: Pressing hold button on the digital angle finder to hold the measurement at any angle, it helps the users effectively record the angle values. In addition, including power on/off, read reverse angle, flip display, and clear readout..
  • Digital Sliding T-bevel: Turn the center knob to lock the angle, and use the protractor to copy any angle from 0 to 360 degrees, In addition, easily get 45 degree angle with a T bevel gauge..
  • LCD Display & Bubble Level: This highly protractor tool is equipped with a large LCD display for easy reading and integrates a steel locking knob for adjustment. There is a perfectly positioned bubble level on the end of the digital angle finder body to ensure the level before tracing any angles and making any cuts..
  • Worry Free Customer Service: We back each T bevel gauge with a free 1 year exchange service plus lifetime technology support, giving you complete peace of mind. Please don’t hesitate to contact us for support or questions..
Check Stock

General Tools 823 Digital Angle Finder Rule, 10-Inch

  • PREVENT WASTE- This digital 10” stainless-steel ruler and angle finder combination tool makes precise, easy and fast measurements.
  • LOCK IT AND REVERSE IT- Digital protractor has lock and reverse angle functions. Place the angle rule where you need to measure your next cut, LOCK it in place with knurled locking nut, make a mark and use your miter saw to make your cut. The angle finder will automatically display the reverse angle.
  • MEASURE 360-DEGREES- Hinge mechanism on the angle rule allows a full range of 0 to 360-degrees to measure inside outside and reverse angles, accuracy +/-0.3 Degrees. Center check notches are on the ruler ends enables exact ruler placement marking. Display has a hold function to freeze movement for accuracy.
  • PICK YOUR ZERO POINT- Woodworking tool can be zeroed at any point in the swing plus the display can be inverted for easy reading.
  • LARGE LCD DISPLAY- Easy to read LCD display eliminates guessing or eyeballing the angle and length with one convenient protractor tool.
  • Power source: "CR2032" Lithium-ion battery (included).
Check Stock

Jackson Safety Pipe Marker Centering Head Tool, Curv-O-Mark Jumbo 7, To measure Pipes 1" and Up, Standard 8" Y-Type Head, Adjustable Dial Set Level, 14776

  • PIPE MEASURER – Designed for pipe fitters and welders as an measurer for setting center lines, establishing angles and marks for butt-ins, locating points inside pipes and tanks, laying out keyways, and measuring declivity.
  • JUMBO SIZE – Curv-O-Mark Jumbo #7 model digital angle finder tool used on pipes and tanks that measure 1" in diameter and larger.
  • Y HEAD – The center finder has a 8" Y type head fitted with adjustable dial bubble protractor (DSL).
  • BEST OPERATION – Use this Jackson Safety hardened centering pin angle finder with a small hammer or mallet to tap the pin in for the most effective pipe marking.
  • SAFETY STANDARDS – When it comes to providing innovative safety solutions, unparalleled features, long-lasting value, and comfort on the job, Jackson Safety has set the standard for the best protective gear and tools in the industry.
Check Stock

CH Hanson 03040 Magnetic Stud Finder - 2 Pack

  • Upgraded 5-in-1 Wall Scanner-The M MARSIAN 5-in-1 stud finder has 5 scanning modes. This stud finder wall scanner includes stud modes, metal scan modes, and AC scan modes.
  • LCD Display & Sound Warning-The M MARSIAN stud finder wall scanner is equipped with the LCD screen with beeping sound to help you get a more evident and clear result on your work. The M MARSIAN stud finder also has a low battery gauge.
  • Easy Operation to Save your Time- The M MARSIAN wall scanner will quickly show the center and edge of the object. Even a beginner can easily locate the woods, metal, pipes, rebar, joists behind the walls as well as the live AC wires with this stud finder.
  • Auto Calibration for More Accuracy-The M MARSIAN wall scanner will automatically calibrate when you open it. Just press the scan button to start calibration and it will complete the moment the beep sound and screen show disappear.
  • Light & Ergonomic Grip Design-The M MARSIAN stud finder wall scanner is a lightweight and ergonomic design for your ease to hold it from any angle.PLEASE BE AWARE THAT THE 9-VOLT BATTERY IS NOT INCLUDED.
Check Stock

Tavool Stud Finder - 4 in 1 Electronic Wall Scanner Detector Wooden Metal Stud Sensor Locator Beam Finders Edge Center Finding with LCD Display for Wood AC Wire Metal Studs Detection

  • Multi-function Stud Finder with 4 Scanning Modes - Including Stud Scan,Deep Scan,Metal Scan and AC Scan,could quickly and easily meet all your scanning demands and give clear accurate detecting results..
  • Advanced Sensor Chips - Equipped with upgraded sensor chips,this scanner senses changes in density behind walls and locates the stud center with GREAT ACCURACY..
  • Large LED Display and Clear Sound Warning - Showing scanning direction and readings, together with beep warning indicating exact stud edge or center. Simple and easy to use, this stud finder could make your better handy tool..
  • Auto-Calibration & Safety - This stud finder would calibrate automatically as you hold the side button. Please make sure to calibrate it at a position with no studs or AC wires nearby. Tavool stud finder would always give warning on live AC wires,keep you away from potential mishaps..
  • Ergonomic Design - its ergonomic design gives you more comfortable experience when you hold it from any angle. You could certainly find great use with this stud scanner..
Check Stock

BOSCH 5-in-1 Digital Angle Finder and Inclinometer GAM 270 MFL

  • VERSATILITY: The Bosch GAM 270 MFL provides five tools in one including a digital angle finder, an inclinometer, a miter calculator, a protractor and level..
  • MEMORY: This angle finder provides angle memory, to provide the same angle and inclinometer measurements in different areas of the jobsite..
  • DISPLAY: Easy-to-read illuminated, rotating flip display for the inclinometer and angle finder. The miter cut calculation has an input measurement from 0-270 degrees...
  • DURABLE: Features robust housing with IP54 protection, making the angle finder water and dust resistant..
  • COMPLETE: The Bosch GAM 270 MFL includes a 5-in-1 digital angle finder, 24 in. leg extension, hard thermoformed case, 4 AA 1.5V batteries..
Check Stock

Pipe Center Finder, Pipefitter Tools w/Centering Head, Pipe Fitting Tools Center Finder Tool to Measure Pipe Diameter Over 0.5" and Up, 4" Y-Type Base Fitted with Adjustable Dial Bubble Protractor.

  • 【Economical Measuring Tool】This Pipe Marker Centering Tool is efficient and useful for setting center lines, determining angles and marks for butt-ins and locating points inside pipes or tanks, arranging keyways and calculating declivity. It can measure tanks or pipes with a diameter of at least 1/2" or larger..
  • 【Easy to Operate】Step1.Loosen or tighten the hexagonal nut with the included hex key allen wrench. Step2.Place the pipe marker tool on the pipe and find the angle you want. Step3.Push the center column down to the fixed point position. Step4.Tap with a hammer to leave a fixed point mark on the pipe..
  • 【Durable and Sturdy Material】The pipe fitter tool can wrap around the circumference of pipes to measure and mark, and it is made of a highly flexible, heat-resistant gasket material. This Pipe Center Finder Tool is easy to use for pipe fitters and welders as a must have tool..
  • 【Y-Head Shape Base with a DSL】This safety pipe center finder has a 4 inch Y-type base fitted with an adjustable dial bubble protractor (DSL). You could push the center column down to the fixed point position as you want. It is a must have on your list of pipe welding tools..
  • 【Adjustable Dial Bubble Protractor】Printed with a scale in inches, an inch chart and....
Check Stock

300 mm 12 Inch diameter Largest Round Center Finder Compass Drawing Circles Lathe Work and Woodturners Ideal For Locating Center on Logs and General Stock Pieces Works Well on Round and Square Stock

  • 【LARGEST CENTER FINDER】: Finding the center of irregular shapes ,can draw a circle with a radius of 10mm to 150mm, the center point on irregular....
  • 【EASY TO USE】: Set the round template on the piece, move it till you are happy with the center, mark the center with a pencil or sharp point and....
  • 【DURABLE MATERIAL】: Center finder is made of High-quality acrylic material can bend to a certain degree and has better toughness，have a central....
  • 【SCOPE OF USED】：The lathe center finder works on wood, poster board, plastic, metal, glass, composites and more! Center Finder Compass is....
  • 【Product Update】：Center finder woodworking tool On the basis of the original, we have replaced the new font and enlarged the font, which is more....
Check Stock

BOSCH 4-in-1 Digital Angle Finder GAM 220 MF

  • VERSATILITY: The Bosch GAM 220 MF provides four tools in one including an angle finder, miter calculator, protractor and level..
  • MEMORY: This angle finder provides angle memory, to provide the same angle measurement in different areas of the jobsite..
  • DISPLAY: Easy-to-read illuminated, rotating flip display. The miter cut calculation has an input measurement from 0-220 degrees.
  • DURABLE: Features robust housing with IP54 protection, making the angle finder water and dust resistant..
  • COMPELTE: The Bosch GAM 220 MF includes a 4-in-1 digital angle finder, 16 in. leg extension, hard thermoformed case, 4 AA 1.5V batteries..
Check Stock

300mm /11.8inch Round Center Finder Compass for Wood Turners Lathe Work Clear Acrylic Drawing Circles Diameter

  • This center finder is perfect for laying out bowls, trays and platters.
  • Finding the center of irregular shapes to optimize yield is simple and easy.
  • Made from clear, fully transparent acrylic with a center hole and clearly marked circles in 5mm increments.
  • The circle center finder tool helps produce maximum yield on logs smaller than 300mm in diameter.
  • The lathe center finder works on wood, poster board, plastic, metal, glass, composites and more! Center Finder Compass is perfect for wood turners, arts,crafts, school projects, rough and finish carpenters or use it anywhere you need to draw a circle.
Check Stock

General Tools Digital Angle Finder Ruler #822 - 5\ Stainless Steel Woodworking Protractor Tool with Large LCD Display

  • 【High Accuracy 】This digital angle finder allows a full range 0-360° to measure internal angle，external angle & Contra angle Measuring precision is ±0.5°, resolution is 0.05° .You can switch between degrees and minutes to Improve the measurement accuracy , meet your requirements for different accuracy..
  • 【Multi-functional Angle Finder 】This protractor combine a angle finder, ruler(7 inch/190mm) and level tools( 3 bubble, Horizontal, Vertical & Circular Level), get one and can instead of 4 pcs single function tools, make it become a helpful woodworking tools and equipment in daily use, expecially you are tire of a bulk of tools in your toolbox.
  • 【Data Hold】Pressing hold button to hold the measurement at any angle, it helps the users effectively record the angle values. Lock angle feature helps maintain accuracy ideal for use in woodworking, construction, or drawing..
  • 【Durable Battery】Super endurance enables it to work continuously more than 2000 hours. Digital angle Finder automatic power-off function, save power consumption and extend battery life. Protractor is equipped with a large LED for easy reading..
  • 【Our Service 】Our worry-free 18-month warranty, and friendly customer service . So you can rest assured. There’s no worry to....
Check Stock

10\ Round Center Finder Compass Clear Acrylic for Drawing Circles, Lathe Work and Woodturners. Ideal For Locating Center on Logs and General Stock Pieces Works Well on Round and Square Stock

  • If you have ever tried to use a standard compass to draw a circle on irregularly shaped or rough items then you know your results can be mixed at best. Trying to keep the compass centered while making a clearly marked circle can be tough in this situation. The Round, Clear Acrylic Center Finder/Compass solves this issue by providing a clear view of what you are doing and drawing holes with corresponding, clear index marks for drawing circles..
  • The clear round design of the center finder/compass allows you to see exactly what you are doing and assists you with quick, easy placement. Once you locate the spot that you want to center your circle from, use a push pin or brad nail in the center hole of the center finder/compass to hold it in place. Choose the diameter circle you would like to mark, then using a fine pointed pencil or scoring tool to mark your circle..
  • The black markings are appear clearly on lighter colored surfaces and line up with a different size diameter holes in 1/2” increments. You can layout and draw circles from 1” to 10” in diameter. Making this ideal for wood turners, arts, crafts, school projects, rough and finish carpenters or use it anywhere you need to draw a circle. It makes layout and finding the center on many typ....
Check Stock