Reviews Cemented Carbide Rolls

33 Pieces Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 30 CNMG 431 + WNMG 431 + TNMG 331 Metal Indexable Carbide Turning Insert Blades

  • ..., 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 3 pieces carbide inserts and 10 pieces CNMG 431,10 pieces WNMG 431, 10 pieces TNMG 331 metal indexable carbide turning insert blades, cufficient quantity and easy to replace.
  • Material: lathe indexable carbide turning tool holders are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability.
  • Size: diameter of the handle is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and accuracy have reached the first grade.
  • Easy to store: insert 30 pieces of cemented carbide into 3 boxes, and put them in a plastic container, safe and easy to store, compatible with MTJNL1616H16, MWLNL1616H08, MCLNL1616H12 or MTJNR1616H16, MWLNR1616H08, MCLNR1616H12.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a d....
Check Stock

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

  • ...receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and differen....
Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • ...receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and differen....
Check Stock

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

  • ...receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and differen....
Check Stock

High Hardness 2-Flute Milling Cutter, Cemented Carbide Milling Cutter, for Milling PVC Processing Wood Plywood

  • Light weight and compact size, convenient to use and easy to carry around..
  • 10pcs cemented carbide milling cutter with high hardness, durable in use..
  • Adopting high quality cemented carbide material, ensuring long service life..
  • Suitable for processing wood, MDF, acrylic, PVC, EVA, foam, plywood, etc..
  • Clean surface without burrs, incisive cutting edge, milling, hole and edge..
Check Stock

Cannulated Reamer Orthopedic Instrument (8 mm - 14 mm) (1, 12 MM)

  • [INTEGRAL MOLDING] The reamer is integral molding, after quenching, which has stable sizes and good durability..
  • [CEMENTED CARBIDE] Made of cemented carbide material, with high hardness and wear resistance, not easy to deform and corrode..
  • [HIGH EFFICIENCY] With fine grinding flutes, chip removal is smoother without clogging, efficient and labor saving in operation..
  • [UNIVERSAL SHANK] The machine reamer has universal shank design, stable in clamping and not easy to slip or fall off..
  • [APPLICABLE MATERIAL] Suitable for drilling stainless steel, carbon steel, cast iron, die steel, alloy steel, non ferrous metal materials..
Check Stock

uxcell Cemented Carbide Twist Drill Bits 8.5mm Metal Drill Cutter for Stainless Steel Copper Aluminum Zinc Alloy Iron 6 Pcs

  • Cemented Carbide Tip: 8.5mm twist drill bits are made of cemented carbide tip for long service life, more sharp and durable than others.
  • Features: Milled U-flutes with deep-cut spiral delivers fast material removal. Suitable for drilling in tough metal, including heavy-duty abrasive alloy and hardened steel.
  • Use For: Drilling clean, accurate holes in sheet metal, steel, copper, brass, aluminum, plastic, wood, stainless steel and cast iron.
  • Use Note: Please use low speed when drilling and note the temperature of carbide tip is not too high for extending drill bit life.
  • Round Shank Design: Round shank twist drill bit can work with a electric drill (Excluding in the item)..
Check Stock

7 Piece Masonry Drill Bit Set for Tile Brick Cement Concrete Glass Plastic Cinder Block Wood [3/16，1/4，5/16，3/8，1/2 inch ] Chrome Plated with Industrial-Strength Carbide Bit with Storage Box

  • ...dustrial grade material】Made of selected high-quality high-strength alloy steel materials. Compared with ordinary Masonry Drill Bits on the market, it has higher hardness and wear resistance, and has lower cutting resistance. The well-designed high-hardness carbide tip can easily penetrate various materials. Cemented carbide drill bit is used as a material to improve durability..
  • 【Sturdy and durable】 Durable industrial-grade cemented carbide blades and cemented carbide with reinforced heads can prevent the drill from cracking and prolong its service life. Compared with traditional brick drill bits, its strength and sharpness are higher. Anti-rust, smoother drilling and cutting removal, higher hardness and wear resistance. The additional triangular handle can firmly fix the electric drill in the electric drill..
  • 【Wide range of applications】 The tough carbide tip of the pointed design can easily penetrate various materials, and can quickly penetrate and remove debris. Suitable for cement, concrete, ceramic tiles, drill blocks, glass, wood, cinder blocks, travertine, hard plastics, mirrors, etc.! The masonry Drill Bit Set includes 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch to meet the various requirements of home drilling.
Check Stock

10 Piece Masonry Drill Bit Set for Tile Brick Cement Concrete Glass Plastic Cinder block Wood [1/8，3/16，5/32，1/4，5/16，3/8，1/2 inch ] Chrome Plated with Industrial-Strength Carbide Bit with Storage Box

  • ...dustrial grade material】Made of selected high-quality high-strength alloy steel materials. Compared with ordinary Masonry Drill Bits on the market, it has higher hardness and wear resistance, and has lower cutting resistance. The well-designed high-hardness carbide tip can easily penetrate various materials. Cemented carbide drill bit is used as a material to improve durability..
  • 【Sturdy and durable】 Durable industrial-grade cemented carbide blades and cemented carbide with reinforced heads can prevent the drill from cracking and prolong its service life. Compared with traditional brick drill bits, its strength and sharpness are higher. Anti-rust, smoother drilling and cutting removal, higher hardness and wear resistance. The additional triangular handle can firmly fix the electric drill in the electric drill..
  • 【Wide range of applications】 The tough carbide tip of the pointed design can easily penetrate various materials, and can quickly penetrate and remove debris. Suitable for cement, concrete, ceramic tiles, drill blocks, glass, wood, cinder blocks, travertine, hard plastics, mirrors, etc.! The masonry Drill Bit Set includes 3/16 inch, 1/4 inch, 5/16 inch, 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch to meet the various requirements of hom....
Check Stock

Milling Cutter, Milling Tool, ZDZCYS22DL 10Pcs 3.175mm Handle Milling Tool Cemented Carbide 2-Flute Straight Milling Cutter

  • 【Durable】10pcs cemented carbide milling cutter with high hardness, durable in use.
  • 【Material】The milling cutter is made of high-quality cemented carbide materials with long service life.
  • 【Features】The milling cutter has the characteristics of light weight, small size, easy to use and easy to carry.
  • 【Application】2-blade milling cutter is suitable for processing wood, MDF, acrylic, PVC, EVA, foam, plywood, etc.
  • 【Characteristic】Milling tool has a smooth surface, no burrs, sharp edges, milling, holes, and cutting edges.
Check Stock

Yosoo Cemented Carbide Engraving Drill Bit End Mill Carving Drill for PCB CNC SMT Rotary Burr 2mm Milling Cutters Set(10pcs)

  • 【Ultrafine Grain Cemented Carbide】：Made from ultra-fine grain cemented carbide material with good milling, cutting performance, ensuring high work efficiency..
  • 【Excellent Performance】：Have sufficient anti-bending strength, wear resistance, high hardness, high wear resistance and high strength..
  • 【Sharp Cutting Edge】：Sharp cutting edges, can be use for milling holes, grooves and edges on plates and the process will be smooth..
  • 【Polished Surface】：Well polished surfaces are quite clean, neat, and there is no glitches or burrs on the shank..
  • 【Engraved Item Materials】：Many items or materials can be engraved such as circuit boards, metal, plastics, stainless steel and copper..
Check Stock

Roland 3-Pack Type Replacement Cemented Carbide Blade Set 45 Degree

  • 45 degree cemented carbide blades. Pack of 3.
  • Same as the red/green cap replacment blades, FACTORY DIRECT USA.
Check Stock

Lathe Grooving Blade, Lathe Turning Inserts CNC Grooving Cutting Tool (MGMN 150-PCD)

  • MULTIPLE USES: lathe Grooving Inserts can meet a variety of cutting requirements, such as cutting aluminum, copper and its cemented carbide, non-ferrous metals and some non-metals..
  • MATERIAL: CNC lathe Grooving Inserts are made of high-quality diamond materials, with high hardness, high impact resistance, high heat resistance, etc. The Grooving Inserts is not easy to break ..
  • SERVICE LIFE: Due to the high wear resistance and durability of lathe Grooving Inserts, its service life is longer than that of grooved inserts made of general materials, and it is more cost-effective..
  • PRODUCT DESIGN: CNC lathe Grooving Inserts adopts a reasonable and professional design, and the size is also very standard, so the product is stable and reliable in the processing process and has good processing performance..
  • QUALITY ASSURANCE: lathe Grooving Inserts are manufactured through strict standard procedures, and the product quality is qualified. If you have any after-sales problems, please contact customer service and we will deal with it in time..
Check Stock