Reviews Cement Board Screws

48 Pieces Heavy Duty Toggle Bolts, Wall Anchors & Screws for Drywall, 1/4 Inch, 1/8 Inch, 3/16 Inch (3 Sizes)

  • Screws and Drywall Anchors Heavy Duty: These anchors and screws can be used on hollow brick, gypsum board, cement fiber board, wood board, and other hollow materials.
  • Perfect For: The heavy duty drywall anchors and screws can be used to install lighting fixtures, curtain rods, and photo frames.
  • 3 Sizes: The largest drywall anchor screw measures 1/4 x 3 inches, the medium size measures 3/16 x 3 inches, and the smallest measures 1/8 x 2 inches.
  • Durable Material: These toggle bolts and anchors are made with a plated carbon steel and coating which is perfect for hanging heavy items on drywall such as coat racks and flower pot..
  • What’s Included: This set includes 24 of 1/8 inch wall anchors.
Check Stock

Senco 07A200P Duraspin#7 by 2 Drywall to Wood Collated Screw 1 000per Box grey

  • Select propellants that deliver consistent accuracy and performance.
  • DuraSpin collated screws make even the novice or apprentice user as fast as the most experienced bulk screw user.
  • Collated screws mean no more screw slivers underneath your fingernails, or painful finger cuts from bulk screws.Reduced waste--eliminate the waste experienced with bulk screws (can be 10% to 15% of total screws used)..Use with cement board, drywall, floor sheathing, underlayment, and wood.1000-pack.
Check Stock

CondoMounts Tile/Granite/Marble Mounting Kit for Grab Bars, Hand Rails, Towel Hanger, TVs. Mount Without Studs | Diamond Drill Bit with 4 x 90lbs Wall Anchors

  • Mount On Almost Any Surface - The 4 elephant anchors provided can be used to mount almost anything to many different types of material. The tiles will have different types of backings, These include Gypsum board, Drywall, Tile, granite, marble over drywall/cement board, Plasterboard, Composite panels, Cement board, Greenboard, Plaster, and Stucco..
  • A Must Have Kit for Tile Mounting - This mounting kit provides everything you need for your tilt or fixed TV wall mount to be safely mounted onto a tiled wall. Use a minimum of 4 wall anchors for safe installation. Consult with a professional before mounting for any items weighing more then 90lbs..
Check Stock

Simpson Strong-Tie FT18250C25 3/16\FlipToggle Anchor with 2-1/2\ Bolt, 25ct

  • ...ole package. In order to avoid the screws being scattered or lost during use, we specially package for each different type of screws for your convenience and storage. Not only give you the best product, but also the best storage system for them..
  • 【WIDE APPLICATIONS】--- Widely used for hollow brick, gypsum board, cement fiber board, wood board and other hollow substrates, Suitable for installing light fixtures such as lamps, curtain rods, photo frames, coat racks, power switches, what’s more, the product is highly adaptable, it can be installed quickly with a normal screwdriver..
Check Stock

CondoMounts Heavy Duty 19-Piece 90lbs NO Stud Drywall or Metal Stud Mounting Kit for TV Frame TV No Gap Mount Mounting kit.

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • FRAME TV MOUNTING KIT : Perfect for Mounting Frame TV Mount directly on drywall without the need for studs. 3/16 screws fit frame tv NO gap wall mount..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • FULL PACKAGE- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting experience..
Check Stock

Toggle Bolt HSCGIN 24PCS M4 Stainless Steel Toggle Bolt and Wing Nut Kit Round Head Butterfly Drywall Anchor Toggle Wing Nut Bolt

  • Toggle Bolt and Wing Nut Kit. Color: Silver. Material: Stainless Steel..
  • Sturdy and well-made: high quality stainless steel anchors, environmentally friendly materials. Stainless steel can be used in wet environments and will last for a long time. We offer great toggle bolt kits..
  • How to apply this kit: First, you'll need to drill a hole (large enough to go through the folded spring wings), then thread these toggle bolts through the hole. At this point the wings are released and clamped inside, then the bolts are pulled down to tighten, taking care to leave enough room for the wings to loosen. Finally, it is best to use an electric screwdriver to screw in the screws..
  • Wide compatibility: widely used in hollow substrates such as hollow brick, gypsum board, fiber cement board, wood board, etc., suitable for installing lamps, curtain rods, photo frames, coat racks, power switches and other lamps..
Check Stock

Aexit Blue Zinc Anchors Plated Screw Type Car Repair Expansion Bolt Stud Anchors M10x80mm 4pcs

  • ... system and can be pre-installed without using a bolt since our anchors won't fall off and into your wall..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • HEAVY DUTY DRYWALL MOUNTING KIT- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting experience..
  • VIDEO INSTRUCTIONS & SUPPORT : Over 10 Videos to help you mount different items safely..
  • FULL PACKAGE : Hex Shank Drill bit, screws, washers are included so you DONT need to to buy them separately..
  • METAL STUD : Can be used for mounting on Metal stud walls.
Check Stock

Redneck Convent Paddleboard SUP Wall Mount Rack 2-Pack (Pair) Paddle Board, Longboard, Surfboard, Snowboard, Garage Storage Hanger Hook

  • SAFELY STORE YOUR PADDLEBOARD: Keep your paddleboard or SUP off the ground and avoid damage from rough cement garage floors or sandy porches with the Redneck Convent Wall Mount Rack Holder.
  • Holds up to 2 paddleboards with an 8-inch or less (20.3cm) deck height.
  • For any length paddleboard (you can space hooks however far apart to accommodate your boat).
  • HOLDS OTHER ITEMS: Hanger legs have approximate 8-inch (20.3cm) gap and 23-inch (58.4cm) length to hold a paddleboard (SUP), kayak, snowboard, surfboard, wakeboard, ski, longboard, shortboard, body board, small canoe, or even ladder for indoor or outdoor storage in your garage, shop, storage room, showroom, on the side of your house, on your deck, or near your dock.
  • Frees up space on the ground with enough room to still park your car in the garage.
  • EASY INSTALLATION: Comes with installation hardware (4 screws and 4 ribbed plastic screw anchor clips) for a quick and simple mounting experience.
  • BUILT TO LAST: Constructed from heavy-duty powder-coated steel with foam padding to protect the surface of your paddleboard.
  • Will hold 2 paddleboards indoors or outdoors and will not cause bows in your board like other hanging models.
  • CONTENTS: Package includes a pair (2) of hangers and installation hardware (4 screws....
Check Stock

Hitachi 18106 10-Inch Polycrystalline Diamond Dry Cutting Hardiblade Saw Blade 6-Teeth

  • More durable than traditional carbide blades.
  • Made for cross cutting fiber cement board.
Check Stock

TOGGLER SNAPTOGGLE BCS Toggle Anchor, 304 Stainless Steel Channel, Made in US, 3/8\ to 2-1/2\ Grip Range, For 3/8\-16 UNC Fastener Size (Pack of 25)

  • Practical Kit: Zinc plated steel round head is used for hanging and fixing heavy objects. It is easy to use and bring more convenience to your life.
  • Premium Material: This toggle bolt and wing nut kit is made of high quality zinc plated steel which is strong and sturdy and offers good corrosion resistance and rust resistance in bad environment like high temperature, cold weather, and high humidity areas.
  • Wide compatibility: Widely used for hollow brick, gypsum board, cement fiber board, wood board and other hollow substrates, Suitable for installing light fixtures such as lamps, curtain rods, photo frames, coat racks, power switches.
  • Three Sizes: We have prepared 3 sizes of toggle bolt and wing nut kit, a complete kit, for you to meet different needs in your daily life.
  • What You Get: 1/8inch: 8pcs, 3/16inch: 8pcs, 1/4inch: 8Pcs, Lenink butterfly screws anchor drywall provide you with a more convenient driling way. Please feel free to contact us if you have any problem.
Check Stock

Tape Fiberglas Cement 3inx50ft

  • Long-lasting, alkali-resistant mesh will withstand corrosive effects of the alkaline present in cement board joint finishing, lightweight concrete panel seaming and crack repair, block foundation, and reinforcement for fiber cement, and concrete stucco. Heavier fiberglass yarns for more strength than regular mesh tapes..
Check Stock

SHALL 5/16” (8 mm) Fiber Cement Siding Shear Blades Replacement Set, for Shall Electric Fiber Cement Siding Shear (SH111007AE), Clean Cut for Cement Board, Tile Board, Backer board

  • Product dimension: Left blade & right blade: 4-7/8” X 3/14’’ (12.5 cm X 1.9 cm).
  • center blade: 5-5/8’’ X 2’’ (14.3 cm X 5 cm).
  • hex bolts length: 1-7/16’’ (3.6 cm). Compatible with SHALL (SH111007AE) and other electric fiber cement siding shear that have the same structure and size of cutter head.
  • Cutting capacity: Cutting up to 5/16” (8 mm) cement board, tile board, backer board and etc. In addition, applicable for cutting cement board, hardie backerboard, shower backerboard, waterproof backerboard and so on. Multi-functional, meeting most of your cutting needs.
  • Double-cut blade: Double cut design for creating a 5/16” (8 mm) curled thin strip, delivering fast clean cut without creating extra wastes and air-borne dust, smooth as silk. Besides, this replacement’s advantages are flexibility in cutting curves, efficiency, accuracy, durability and quality finish.
  • Premium material: Blades are made of superior alloy steel, anti-rusting. Heat-treated: 55-60HRC. High strength bolts (Specification: M5, Strength: 12.9).
  • What including: 3 blades (left blade, center blade, right blade), 2 bushings, 3 head bolts.
Check Stock

200lbs Metal Stud Wall & Drywall TV Mounting Kit for TV Mounts - Includes 4 Elephant Anchors, Titanium Drill Bit and TV Mounting Hardware

  • METAL/STEEL STUD WALL MOUNTING KIT. Complete mouting kit to facilitates secure & easy installation of TVs or other objects on metal/steel studs or drywall. Metal studs are common in home basements, above fireplaces, extensions, condominiums, home additions, apartments and commercial construction..
  • STUD NOT REQUIRED. Break strength 200lbs . The 4 Pieces of Elephant Anchors provided can be used on Gypsum board, Drywall, Tile over drywall, Plasterboard, Composite panels, Cement board, Plaster, Stucco..
  • COMPLETE KIT – One 1/2″ hex socket titanium drill bit, 4pcs of ¼ -20hollow wall toggle anchors, 4pcs of ¼-20 x 2’’ screws, 4pcs of ¼’’ washer. NO trips to Home Depot or Lowes..
  • OTHER MOUNTING USE – Wall Mounting of Shelves, Wall Mounting of Cabinets, Wall Mounting Bathroom Accessories, Wall Mounting Grab Bar, Mounting Vanity, Draperies, Curtain Rods, Blinds and Mirrors when studs are not an option..
  • NEATLY LABELED PACKAGING & MANUAL– The components in this package is separated by different use, the instruction manual is also included.
Check Stock