Reviews Cctv Multiplexer

Installer CCTV 4CH Video Color Quad Multiplexer with Loopout Remote Control and Free 1 Amp Power Adapter

• The 4Ch Video Color Quad Multiplexer allows several video signals from CCTV security cameras or other analog video devices to be combined and displayed on one monitor. The video processors are also commonly referred to as video mux, CCTV multiplexer, or color quad processor..
• Full screen displays at real-time refresh rate for each channel. Multiple and automatic display by turn mode: 4Ch, 2Ch, Single Channel.
• Camera title, time and date display for easy identification, 4 Channel BNC input and 2 Video BNC outputs.
• Switch between NTSC and PAL system. Picture in Picture show, PIP position switched (top left, top right, bottom left, bottom right corner). High-Resolution Picture show, Adjust individual resolution. High-quality Screen Freeze function..
• Free 1Amp Power Adapter and remote control Included.

Evertech 8 Channel Analog CCTV Video Multiplexer Color Quad Processor Screen Splitter with Remote Control

• 8 Channel CCTV Video Multiplexer Color Quad Processor compatible with all Analog Security Cameras. NOT Compatible with 720P/1080P AHD / TVI / CVI / HD-SDI CCTV Cameras..
• Multiple display modes: 8 camera view, 4 camera view, 2 camera view, single camera view, PIP (picture in picture).
• NTSC and PAL Video Format Supported. Resolution PAL: 720 x 576.
• 8 Channel BNC Video Inputs, 1 BNC VCR In, 1 BNC VCR Out, 1 BNC Monitor. Image Freeze Function, Selectable Image Zoom Area, Video Loss Detection, Motion Detection, Auto sequence.
• Power Supply adapter, remote control and user manual included..

AES 8Ch CCTV Analog Camera System BNC Video Splitter to TV 8 Port Multiplexer 12V Power Quad Processor

• BNC Connectors. Compatible with any BNC Analog Camera System..
• US Tech Support. Reach a Live Technician Nearly 24/7..

AllAboutAdapters Composite S-Video to Component Video RGB Sync On Green Converter

• Dual-purpose composite RCA video and S-video to YUV/RGB converter with selectable component video output and 15Khz RGsB output. Selectable composite video/s-video input via manual push button..
• Selectable video output format between 15Khz RGsB and interlaced YCbCr. Converting standard composite video or S-Video signal into interlaced component YCbCr video output at 480i/576i for TV or projector display..
• Converting standard composite video or S-Video signal into RGB at 15.625Khz/50Hz or 15.734Khz/60Hz ouput for RGB monitor display. Restores analog video feed to component/RGB type video with all the vibrant and rich color information accurately presented again..
• Crisp and clean output with full color depth via component/RGB format. Great video adapter for connecting CCTV video surveillance camera system or DVR, quad processor or video multiplexer to component video or RGB video for large screen display..
• Premium SOG video sync adapter for monitors requiring RGB sync on green type for the input. Automatic video input system detection for NTSC/PAL/SECAM devices. Supports worldwide video system including NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N and SECAM..

20PCS CD4053 CD4053B CD4053BE DIP-16 Analog Multiplexer IC

• Process Digital Signals: Because the multiplexer can also process digital signals, you can use it to transfer TTL level serial data to multiple devices through pipe or transfer from multiple devices..
• High Level: Drive it to high level, and it will completely disconnect the common pins (all switches are disconnected)..
• Scope of Application: It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
• 16 Channel Analog Multiplexer: This is a very convenient 16 channel CD74HC4067 analog, digital multiplexer, demultiplexer..
• Bidirectional Internal Switch: With a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..

Analog Devices ADG509ATQ Analog Multiplexer

• 【16-channel Analog Multiplexer】- This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
• 【Used for】- It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
• 【Process Digital Signals】- Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
• 【Bidirectional Internal Switch】- The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent cross talk, please turn off the switch first and then on..
• 【Note】- Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected). Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering..

20Pcs HEF4051BT SOP-16 HEF4051B SOP16 F4051B 8-Channel Analog multiplexer/demultiplexer

6pcs CD74HC4067 CMOS 16 Channel 16 CH Digital Analog Multiplexer Breakout Module for Arduino

• This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067..
• Use the CD74HC4067 16-channel analog signal switch.
• Analog signal input: C0-C15 16 channels..
• IT can be used the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067..
• Wide operating temperature range: -55C to 125C.

100PCS CD4053 CD4053B CD4053BE DIP-16 Analog Multiplexer IC

• It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
• The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
• Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
• This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
• Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..

Analog Multiplexer Single 8:1 ñ9 Volt 20 Volt 16-Pin Plastic DIP Tube

• The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
• It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
• Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
• Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
• This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..

Treedix TCA9548A I2C Multiplexer Breakout Board 8 Channel Expansion Board with pi Header for Arduino

• The TCA9548A Breakout board supports communicating with multiple I2C devices with the same address, making it easy to interface with them..
• TCA9548A multiplexer features: bidirectional eight-channel I2C multiplexer, active low reset input.
• The default address of this expander is 0x70, the address can be changed, and can be set within 0x70~0x77..
• In the address of 0x70~0x77, 8 expanders can be cascaded, and each expander can be connected to 8 devices with the same address, so that the same I2C port can be connected to 64 devices with the same address and can be used normally..
• The chip is compatible with 3V and 5V and can be used with any logic level.

OEM Nexperia 74HC4067PW,112, Analog Switch/Analog Multiplexer Single 16:1 24-Pin TSSOP Bulk (100 Items)

• Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
• This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
• The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
• It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
• Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..

Analog Demultiplexer, CD74HC4067 High Speed Analog Multiplexer Two-Way Connection Analog Multiplexer High Speed for Digital and Analog Signals

• Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
• This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
• The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
• Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
• It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..