Reviews Cb Car Mobile Antenna

DC Power Cord Replacement for Cobra HH 40, HH ROADTRIP Handheld CB Radio

  • Product 1: The Uniden PRO401HH delivers the convenience of a handheld CB radio with the security of knowing you have the longest range possible so you can always stay in touch..
  • Product 1: Features a low-power setting to conserve battery life and a high-power setting so you can extend your range When needed..
  • Product 1: Designed for use in the citizens band (CB) radio service, the PRO401HH mobile radio will operate on any of the 40 CB frequencies authorized by the (FCC)..
  • Product 1: Whether you're in your car, truck, Van or bike, over the road, camping out or just out hiking the trail, The high performance PRO401HH s you're never out of touch..
  • Product 2: Center Loaded CB Antenna with 9’ Coax Cable.
  • Product 2: Includes Magnet Mount, Coax Cable, and Antenna.
Check Stock

Larsen - 3/4' Hole Mount Antenna with 0-6 GHz Frequency No Connector

  • The mount is a "trunk lid" mount with 13'/about 4m RG-58U cable. This requires a small (typically 3/8" to 3/4" ) hole be drilled through the surface hosting the mount, and is the best choice for an extremely rugged installation..
  • L-Bracket Hole Stainless Steel 3/4" NMO Hole Mount, L Bracket for HYS TCJ-N1 Coax NMO Mount Cable Mobile Antennas Car Truck Hood install. Stainless Steel L-bracket for Trunk Groove Or Side Mounting..
  • Recommended HYS NMO Antenna: NMO Antenna TC-HC152V (136-174Mhz,B077HRNLHZ), TC-HC152U (400-470Mhz, B077HXNJ1F ) or HYS SDN1(144/430Mhz, B07P71M8M5), easy install and match perfectly..
  • Prefect for mobile FM transceiver NMO antennas. NMO to PL259 working for so239/uhf female Motorola Yaesu/Vertex Kenwood HYT Icom radio, the clip need a NMO HF/UHF/VHF/CB Antenna..
  • This is a high quality, low profile base mount that does the job very well. 13 feet NMO cable connected easily with the antenna and there is plenty of cable to reach an antenna mounted practically anywhere on your vehicle/car..
Check Stock

Super Antenna UM3SP SuperMount with SuperSpike Antenna Mount for MP1 ham Radio Antenna

  • THIS IS: The new model UM3SP SuperMount Ground Spike Mount, a ground mount for a portable VERTICAL antenna. Designed as part of the Super Antenna MP1....
  • OPERATION: Designed for field deployment of Super Antenna MP1 and other types of standard thread 3/8"-24 antennas such as HF amateur or CB mobile....
  • WEIGHT: A third of a pound. 0.34 pound (500g). RADIAL TERMINALS: Two quarter-inch (6mm) male push-on quick disconnect tabs for Radials. PLATE MOUNTING....
  • COMPATIBILITY: Fully compatible with all Super Antenna equipment.
  • CB mobile antennas. CONNECTOR: SO-239 (PL259....
  • CONTENTS: UM3 SuperMount + SP3 SuperSpike. COLOR: Natural metallic silver. RECOMMENDED ACCESSORIES: Super Antenna model MP1B antenna.
Check Stock

Marketty SS-3H CB Antenna Spring, Stainless Steel Heavy Duty CB Radio Antenna Mount Spring, Spring to Fit Mobile/in-Vehicle CB Radio Antenna Mount Up to 60' Long and 3/8' X 24 Thread (Black)

  • Provides a Better Radio Experience – Marketty knows that more than 89% of people love broadcast radio when driving. In order to have a better listening experience, our SS-3H CB antenna spring is made of durable, top-grade electro-polished stainless steel, and is finished in matte black by electroplating and polishing which this antenna spring is so strong and durable.
  • Design for Your CB Antennas – Our CB radio antenna mount spring installs between the mount and antenna and provides flexibility in the event that the antenna is hit or jarred. The CB antenna mount fit Mobile/in-Vehicle CB Radio Antenna Mount up to 60″ long and standard 3/8″ x 24 threads to fit Fire-stick antennas, which perfect fit for off-road vehicles, vans, trucks, RV, motorhomes, boats, and so on.
  • Easy to Operate – Screw the CB antenna spring into any CB stud or mount, and then screw the antenna into the top of the disconnect. Spring can also be used with a quick disconnect.
  • they’re simply stacked/screwed on top of one another. Every antenna should have a Marketty spring to protect the antenna, mount, and vehicle.
  • More Antenna Spring Details – Marketty SS-3H CB antenna spring upper and lower inserts are made of chrome-plated machine brass. Each antenna spring is about 3.0....
Check Stock

Sirio Performer 5000 3/8 10m & CB Mobile Trucker Antenna (for 3/8 24 Mount)

  • Type: Trucker Antenna CB & 10m Mobile antennas Very High power handling capability Tunable from 27 to 30 MHz.
  • 17/7 PH tapered stainless steel whip Whip detachable for car-wash.
  • Type: Trucker Antenna Frequency range: 27 ... 30 MHz Impedance: 50 Ω Polarization: linear vertical.
  • SWR res. freq.: ≤ 1.2 Bandwidth SWR ≤ 2: ≥ 2000 KHz (200 channel) Max. power: 1500 Watts (CW) continuous 5000 Watts (CW) short time.
Check Stock

New Tram Browning Black 1246-B Trunk Antenna Mount NMO With PL-259 connector and 17Ft of RG-58 Coax Cable

  • The mount is a "trunk lid" mount with 13'/about 4m RG-58 cable..
  • The flange to the left hooks under the lid of a vehicle trunk..
  • Stainless steel brackets and corrosion resistance hardware.
  • Prefect for mobile FM transceiver NMO antennas. NMO to PL259 working for so239/uhf female Motorola Yaesu/Vertex Kenwood HYT Icom radio, the clip need a NMO HF/UHF/VHF/CB Antenna. Recommended HYS NMO Antenna: NMO Antenna TC-HC152V (136-174Mhz) or TC-HC152U (400-470Mhz), easy install and match perfectly.
  • This is a high quality, low profile base mount that does the job very well. 13 feet NMO cable connected easily with the antenna and there is plenty of cable to reach an antenna mounted practically anywhere on your vehicle/car..
Check Stock

VECTORCOM 10m & CB Mobile Mount Antenna Kit with 3M RG58 Coaxial Cable with PL259 Plug,Suitable for CB Radio and 10 Meter Radio S327N

  • This 10M & CB Mobile Antenna Kit is suitable for Anytone Smart CB Radio,Anytone AT5555N and other 10M & CB HAM radios.
Check Stock

GRA-ULT01 Lightweight Portable Antenna Mast Mount Tripod Tower UHF SO239 Connector for GRA-7350T Ham Radio Amateur Outdoor | GABiL

  • GRA-ULT01 is a telescopic portable tripod for UHF connector portable antennas. Made by Gabil Radio in Taiwan. Designed as part of a portable, backpack, base, travel antenna system for Ham Radio. It is for transmitting and receiving on HF and VHF radio frequencies..
  • A portable mini tower for field deployment of GRA-7350T and other types of antennas such as mobile ham or CB mobile antennas. You can also unscrew the UHF connector and replace it with a gimbal. Make it a camera tripod..
  • COMPATIBILITY: Fully compatible with all Super Antenna equipment, Ham radio mobile antennas. CONNECTOR: SO-239 (PL259 compatible). FITTINGS: Antenna fitting is radio industry standard UHF connector, compatible with standard ham mobile antennas. Works with Ham, Marine, Government, NGO, CAP, MARS, EmComm, Shortwave, CB, MURS, FRS, GMRS, PMR, Weather, FM, Scanner, and everything in between..
  • Connector: 50 Ohm, SO239 to SO239. Minimum working size: 4.72 inch. Maximum working size: 2.6 feet. Weight: 1.1lb. Tripod material: Aluminum alloy for Aerospace. Maximum Loading Weight: 6.6lb..
Check Stock

Bingfu CB Antenna 27MHz CB Radio Antenna Magnetic Base Handheld CB Antenna PL259 & BNC Male Compatible with Cobra Midland Uniden Maxon President Vehicle Car Truck Mobile CB Radio Handheld CB Radio

  • Compatible with CB radios from many brands, improve quality and range to CB radio reception. The antenna design is portable, lightweight and durable, works on all channel within CB radio frequency range of 26MHz to 28 MHz..
  • Easy to be installed on the roof, hood or trunk of vehicles and trucks, and will not scratch..
  • Cable Type: 3m / 10 feet RG58/U Coaxial Cable.
  • Cable Connector Type: PL-259 Male Connector.
  • Accessoried with BNC Male to SO-239 Female Connector Adapter.
  • Compatible with Mobile CB Radios and Handheld CB Radios.
  • Package List: 1 x Antenna, 1 x Connector Adapter (As the Picture Shown).
Check Stock

UAYESOK Heavy Duty Magnetic Antenna Mount 8.8inch, SO239 30KG Suction Triangle Vehicel Mobile Antenna Magnet Base W/5M(16.4ft) RG58 Coaxial Cable

  • [631 Stainless steel tapered whip]Can be used in various indoor and outdoor environments, firm and durable.
  • [Super Loading Coil]By introducing a very tightly wrapped loading coil, it increases reception and range.
  • Spring design in the middle of the antenna,Well protect the antenna and enhance its resistance to external forces.
  • Super thick antenna base,improved stability of the antenna installation.
  • Easy to install,greatly improve the talk distance of your radio,Excellent receive and transmit.
  • Compatible with All Mobile 27MHZ CB Radios,You may need a magnetic base or a mounting bracket if you need to install it in your car.
Check Stock

ABBREE 27Mhz BNC Retractable/Telescopic 9.17/51-Inch Antenna for Handheld CB Radio Full Kit with PL-259 Connector Mobile/Car Radio Antenna for Midland Cobra Uniden Maxon President Car CB Radio

  • 【Feature】Frequency Range: 27MHz；MAX Power: 20W；Connector Type:  BNC+PL-259 Connector Adapter.
  • 【Unique Telescopic antenna】 ABBREE Retractable/Telescopic CB Radio Antenna when extended is almost 51.18Inch/130cm long.It will boost the signal of your radio dramatically!When you are only receiving and not transmitting you can conveniently retract the antenna down to only 9.17 inch/23.3 cm ,portable at any time, easy to carry and replace..
  • 【Antenna Full Kit】Get Extended Kit of radio with Antenna Magnetic Base,PL-259 Connector Adapter,27Mhz BNC Connector.
  • With Strong Mgnetic Base,No tool needed, It only takes a few minutes to install your new radio antenna；One package solves all your needs!.
  • 【Compatible Model】Cable Connector Type: 27Mhz BNC Connector+PL-259 Connector Adapter，Compatible with most Mobile CB Radios and Handheld CB Radios with a 27Mhz BNC connector；Such as Cobra HH50WXST H38WXST HHRT50；Midland:75-822 75-785 MHS75 7W44.
  • Uniden: BC75XLT PRO401HH PRO501HH PC88LTX，Maxon HCB-10C.
  • Other BNC 27MHZ radios suitable for this antenna.If your radio model is not compatible, please see my other item.then, we will help you find one that suits for you..
  • ★【Worry-free After-sales Service】ABBREE provi....
Check Stock

Sirio Performer 5000 3/8 NS 10m & CB Mobile 3/8 Trucker Antenna (No Shaft)

  • CB & 10m Mobile antennas Very High power handling capability Tunable from 27 to 30 MHz 17/7 PH tapered stainless steel whip Whip detachable for car-wash.
  • Type: trucker antenna Frequency range: 27 ... 30MHz Impedance: 50 Ω Polarization: linear vertical.
  • SWR @ res. freq.: ≤ 1.2 Bandwidth @ SWR ≤ 2: ≥ 2600 KHz (230 channel) Max. power: 1500 Watts (CW) continuous 5000 Watts (CW) short time.
  • Connection: 3/8"x24 thread male Height (approx.): 2.02 mm/ 6.6 ft Weight (approx.): 480 gr/1.06 lb.
Check Stock

Bingfu 27MHz CB Radio Antenna Magnetic Base Soft Whip PL259 & BNC Male Compatible with Cobra Midland Uniden Maxon President Mobile CB Radio Antenna Kit for Car Truck

  • Heavy Duty Magnetic Mount, easy to be installed on the roof, hood or trunk of vehicles and trucks, and will not scratch. The antenna design is portable, lightweight and durable..
  • Compatible with CB radios from many brands, improve quality and range to CB radio reception. Works on all channel within CB radio frequency range of 26MHz to 28 MHz..
  • Cable Type: 3m/10 feet RG58/U Coaxial Cable.
  • Compatible with Uniden Bearcat 980 880 PRO510XL PRO520XL PRO505XL PC78LTX CMX760 PC88LTX PC68LTX, Cobra 29LTD, Galaxy DX-959B DX-939F Mobile Radio etc.
  • Package List: 1 x Antenna (PL-259 Male Connector), 1 x Connector Adapter (BNC Male to SO-239 Female Connector Adapter) (As the Picture Shown).
Check Stock