Reviews Catback Exhaust

BLACKHORSE-RACING 3 Inch 76mm Stainless Steel V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipes SS V-Band Flange Kit

  • ▲ 3 INCH STAINLESS STEEL EXHAUST CLAMP KIT – Complete V-band kit is ideal for performance exhaust systems, catback exhausts, turbo back exhausts and more..
  • ▲ COMPLETE 3 PIECE KIT – This complete 3inch Vband kit includes 1x 3″ V-Band clamp which is designed to accommodate the 2x stainless steel 3″ Vband flanges.
  • 1 male flange and 1 female flange. This allows for the flanges to properly align during installation to insure a leak free seal..
  • ▲ DESIGNED FOR 3″ EXHAUST PIPES – This kit is specifically designed for 3″ exhaust pipes. The flanges feature a recessed opening which allows for a 3″ exhaust to easily slip inside the flange, providing a perfect overlap seam for welding..
  • ▲ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES – If you’re making a catback exhaust, turbo back exhaust, mid pipe, or up pipe for your car, truck, or other vehicle this V-band kit is ideal for connecting different pipe sections. Conventional exhaust flanges multiple nuts, bolts, washers and a gasket. A V-band kit eliminates all of these and allows for a connection with a single nut..
  • ▲ EASY ON, EASY OFF – A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust flanges involve multiple ....
Check Stock

2 Stainless Steel Exhaust Clamp Pipe Joint Bolts Band Flanges Clamp

  • Package includes:1 x turbo exhaust clamp.
  • Need professional installation, no instructions is included..
  • Fits for 2" ID tube, perfect for catback, exhaust, mufflers and downpipes..
  • Please check size in picture before ordering..
  • Please allow 0.5-1 inch difference due to manual measurement..
Check Stock

2.5 Stainless Steel Exhaust Clamp Pipe Joint Bolts Band Flanges Clamp

  • Package includes:1 x turbo exhaust clamp.
  • Need professional installation, no instructions is included..
  • Fits for 2.5" ID tube, perfect for catback, exhaust, mufflers and downpipes..
  • Please check size in picture before ordering..
  • Please allow 0.5-1 inch difference due to manual measurement..
Check Stock

4 Inches Round Muffler Tip Catback Exhaust System Compatible with Acura Integra RS GS LS 94-01 Stainless Steel

  • ▶️ This catback is compatible with 94-01 Acura Integra, does NOT fit GS-R / Type R models.
  • ▶️ Aggressive deep and smooth tone sound while ensures smooth exhaust gas flow.
  • Dyno proven to instantly increases 15-25 horsepower or low end....
  • ▶️ Made of high quality T-304 stainless steel with computerized mandrel-bends for strength and durability.
  • ▶️ Easy to intall, direct bolt-on. No drilling or modifications needed for installation. Gaskets and hardware are Included.
  • ▶️ Muffler Tip Type: Rounded Tip | Muffler Exhaust Tip Diameter: 4" | Inlet Size: 2.25".
Check Stock

4 Inches Burnt Muffler Tip Catback Exhaust System Compatible with Acura RSX Type-S 02-06, Stainless Steel

  • ▶️ This catback is compatible with 02-06 Acura RSX DC5 Type-S.
  • ▶️ It is high performance JDM racing design, i.e. maximizing smoothest high exhaust air flow rate. Dyno proven to instantly increases 10 -20 horsepower or low end torque.
  • It also can increase engine output and efficiency.
  • ▶️ Made of high quality T-304 stainless steel with computerized mandrel-bends for strength and durability.
  • TIG welded CNC machine flange for resistance against pressure and corrosion.
  • ▶️ Easy to intall, direct bolt-on. No drilling or modifications needed for installation. Removable silence, gaskets and hardware are Included.
  • ▶️ Muffler Tip Type: Burnt Tip | Muffler Exhaust Tip Diameter: 4" | Inlet Size: 2.5".
Check Stock

4 Inches Burnt Muffler Tip Catback Exhaust System Compatible with Acura RSX Base Model 02-06, Stainless Steel

  • ▶️ This catback is compatible with 02-06 Acura RSX DC5 Non Type-S.
  • ▶️ It is high performance JDM racing design, i.e. maximizing smoothest high exhaust air flow rate. Dyno proven to instantly increases 10 -20 horsepower or low end torque.
  • It also can increase engine output and efficiency.
  • ▶️ Made of high quality T-304 stainless steel with computerized mandrel-bends for strength and durability.
  • TIG welded CNC machine flange for resistance against pressure and corrosion.
  • ▶️ Easy to intall, direct bolt-on. No drilling or modifications needed for installation. Removable silence, gaskets and hardware are Included.
  • ▶️ Muffler Tip Type: Burnt Tip | Muffler Exhaust Tip Diameter: 4" | Inlet Size: 2.25".
Check Stock

TYFYB Full Cat Back Exhaust Drift Spec Compatible with 2003 2004 2005 2006 2007 2008 350Z Infiniti G35, Silver

  • Fitment: Compatible with NS 350Z 2003-2008, Infinti G35 2003-2008.
  • 4.5" Flat tip with removable double-layer silencer, 3" piping.
  • Gain more horse power, faster response, averaging 10-15 extra hp.
  • Producing strong, deep and noticeable sound.
  • Package including: One Catback Exhaust with bolts and gaskets.
Check Stock

RULLINE 2 inch Hardware Exhaust Clamp, Lap Joint+Bolts Band Flanges Clamp Stainless Steel Universal Compatible with Muffler Downpipe Catback Pipe Connector

  • Suitable Size: ID: 2"/51mm + Overall Length 3.74"/95mm.
  • Universal Fitment: Fit for 2" ID tube (Perfect for Catback, Exhausts, Mufflers, Downpipes) of most car model such as VW Audi etc.
  • Brilliant Sealing: Superior Sealing capability prevent Exhaust gas and Noise from Leaking, Tight but without distoring the pipe.
  • Durable Material: Thickened and widened stainless steel for long service life, Anti-Corrosion, Rust prevention, Clean and Bright Apperance.
  • Easy Installation: Easy to install without welding and drilling, Removable and Reusable.
Check Stock

DNA Motoring CBE-HC922 2.25 Inches Stainless Steel 15-25 Horsepower Low End Torque Catback Exhaust System Smooth Tone Sound Removable Silencer Compatible with 92-00 Honda Civic Coupe / Sedan

  • STRENGTH CONSTRUCTION - Made of high quality T-304 stainless steel with computerized mandrel-bends, which ensures the strength and durability to use.....
  • HIGH PERFORMANCE - Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone sound while ensures smooth....
  • GOOD DESIGN - The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect....
  • MUFFLER & DIMENSION - 4.0"(OD) removable silencer muffler tip. 2.25"(ID) Inlet / 2.25"(OD) main piping..
  • FITMENT - Compatible with 92-00 Honda Civic Coupe / Sedan. Performance full catback kit EJ EG EM..
Check Stock

Made in USA New Exhaust Muffler System for Jeep Wrangler 2.5 & 4.0 1997-1999

  • This is a brand new EAGLE BRAND muffler catback system for Jeep Wrangler FITS, to Production Date /23/ Jeep Wrangler 2.5L or 4.0L , all models NOTE , before production date /23/ SYSTEM INCLUDES 1x Part# 74 Muffler 1x Part# 454842 4C1617 Tail Pipe 2x Part# MC2hd clamp.
Check Stock

Superchips 4865 Flashpaq for Nissan Titan, Armada, Infiniti QX56 5.6L/Pathfinder and Frontier 4.0L

  • Greater increase in torque, horsepower and drivability.
  • Works with most cold air intakes and catback exhausts.
  • NASA grade calibrations preloaded for maximum performance.
Check Stock

PEDAL COMMANDER - PC65 for GMC Sierra (2007-2018) Fits: 1500, 2500HD, 3500HD, Base, SLE, SLT, Denali (4.3L 4.8L 5.3L 6.0L 6.2L 6.6L) Gas & Diesel | Throttle Response Controller

  • Greater increase in torque, horsepower and drivability.
  • Works with most cold air intakes and catback exhausts.
  • NASA grade calibrations preloaded for maximum performance.
Check Stock

Cuque Motorcycle Exhaust Mid-Pipe Middle Pipe Full Exhaust System Vent Middle Pipe Stainless Steel Vent Middle Tube for Honda MSX125 2013-2015

  • 【Applicable models】Exhaust Mid Header Pipe,The exhaust central pipe is designed according to the exhaust pipe structure of a specific model. It can perfectly replace AFRICA TWIN CRF1000L ADV 2016 ‑2019 and other series models. The performance is stable. Please confirm the model before buying, so as to bring you a good Use experience..
  • 【Durable material】Exhaust Header Tube,It is made of high-quality stainless steel with a tapered tube with a thickness of 1 mm/0.04 inch. It is heat-resistant, high-temperature resistant, sturdy and not easily deformed, and has strong durability..
  • 【Applicable models】Exhaust Mid Header Pipe,The exhaust central pipe is designed according to the exhaust pipe structure of a specific model. It can perfectly replace AFRICA TWIN CRF1000L ADV 2016 ‑2019 and other series models. The performance is stable. Please confirm the model before buying, so as to bring you a good Use experi....
Check Stock