Reviews Catback Exhaust Systems

BLACKHORSE-RACING 3 Inch 76mm Stainless Steel V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipes SS V-Band Flange Kit

  • ▲ 3 INCH STAINLESS STEEL EXHAUST CLAMP KIT – Complete V-band kit is ideal for performance exhaust systems, catback exhausts, turbo back exhausts and more..
  • ▲ COMPLETE 3 PIECE KIT – This complete 3inch Vband kit includes 1x 3″ V-Band clamp which is designed to accommodate the 2x stainless steel 3″ Vband flanges.
  • 1 male flange and 1 female flange. This allows for the flanges to properly align during installation to insure a leak free seal..
  • ▲ DESIGNED FOR 3″ EXHAUST PIPES – This kit is specifically designed for 3″ exhaust pipes. The flanges feature a recessed opening which allows for a 3″ exhaust to easily slip inside the flange, providing a perfect overlap seam for welding..
  • ▲ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES – If you’re making a catback exhaust, turbo back exhaust, mid pipe, or up pipe for your car, truck, or other vehicle this V-band kit is ideal for connecting different pipe sections. Conventional exhaust flanges multiple nuts, bolts, washers and a gasket. A V-band kit eliminates all of these and allows for a connection with a single nut..
  • ▲ EASY ON, EASY OFF – A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust flanges involve multiple ....
Check Stock

2 Stainless Steel Exhaust Clamp Pipe Joint Bolts Band Flanges Clamp

  • Package includes:1 x turbo exhaust clamp.
  • Need professional installation, no instructions is included..
  • Fits for 2" ID tube, perfect for catback, exhaust, mufflers and downpipes..
  • Please check size in picture before ordering..
  • Please allow 0.5-1 inch difference due to manual measurement..
Check Stock

2.5 Stainless Steel Exhaust Clamp Pipe Joint Bolts Band Flanges Clamp

  • Package includes:1 x turbo exhaust clamp.
  • Need professional installation, no instructions is included..
  • Fits for 2.5" ID tube, perfect for catback, exhaust, mufflers and downpipes..
  • Please check size in picture before ordering..
  • Please allow 0.5-1 inch difference due to manual measurement..
Check Stock

4 Inches Round Muffler Tip Catback Exhaust System Compatible with Acura Integra RS GS LS 94-01 Stainless Steel

  • ▶️ This catback is compatible with 94-01 Acura Integra, does NOT fit GS-R / Type R models.
  • ▶️ Aggressive deep and smooth tone sound while ensures smooth exhaust gas flow.
  • Dyno proven to instantly increases 15-25 horsepower or low end....
  • ▶️ Made of high quality T-304 stainless steel with computerized mandrel-bends for strength and durability.
  • ▶️ Easy to intall, direct bolt-on. No drilling or modifications needed for installation. Gaskets and hardware are Included.
  • ▶️ Muffler Tip Type: Rounded Tip | Muffler Exhaust Tip Diameter: 4" | Inlet Size: 2.25".
Check Stock

4 Inches Burnt Muffler Tip Catback Exhaust System Compatible with Acura RSX Type-S 02-06, Stainless Steel

  • ▶️ This catback is compatible with 02-06 Acura RSX DC5 Type-S.
  • ▶️ It is high performance JDM racing design, i.e. maximizing smoothest high exhaust air flow rate. Dyno proven to instantly increases 10 -20 horsepower or low end torque.
  • It also can increase engine output and efficiency.
  • ▶️ Made of high quality T-304 stainless steel with computerized mandrel-bends for strength and durability.
  • TIG welded CNC machine flange for resistance against pressure and corrosion.
  • ▶️ Easy to intall, direct bolt-on. No drilling or modifications needed for installation. Removable silence, gaskets and hardware are Included.
  • ▶️ Muffler Tip Type: Burnt Tip | Muffler Exhaust Tip Diameter: 4" | Inlet Size: 2.5".
Check Stock

4 Inches Burnt Muffler Tip Catback Exhaust System Compatible with Acura RSX Base Model 02-06, Stainless Steel

  • ▶️ This catback is compatible with 02-06 Acura RSX DC5 Non Type-S.
  • ▶️ It is high performance JDM racing design, i.e. maximizing smoothest high exhaust air flow rate. Dyno proven to instantly increases 10 -20 horsepower or low end torque.
  • It also can increase engine output and efficiency.
  • ▶️ Made of high quality T-304 stainless steel with computerized mandrel-bends for strength and durability.
  • TIG welded CNC machine flange for resistance against pressure and corrosion.
  • ▶️ Easy to intall, direct bolt-on. No drilling or modifications needed for installation. Removable silence, gaskets and hardware are Included.
  • ▶️ Muffler Tip Type: Burnt Tip | Muffler Exhaust Tip Diameter: 4" | Inlet Size: 2.25".
Check Stock

TYFYB Full Cat Back Exhaust Drift Spec Compatible with 2003 2004 2005 2006 2007 2008 350Z Infiniti G35, Silver

  • Fitment: Compatible with NS 350Z 2003-2008, Infinti G35 2003-2008.
  • 4.5" Flat tip with removable double-layer silencer, 3" piping.
  • Gain more horse power, faster response, averaging 10-15 extra hp.
  • Producing strong, deep and noticeable sound.
  • Package including: One Catback Exhaust with bolts and gaskets.
Check Stock

RULLINE 2 inch Hardware Exhaust Clamp, Lap Joint+Bolts Band Flanges Clamp Stainless Steel Universal Compatible with Muffler Downpipe Catback Pipe Connector

  • Suitable Size: ID: 2"/51mm + Overall Length 3.74"/95mm.
  • Universal Fitment: Fit for 2" ID tube (Perfect for Catback, Exhausts, Mufflers, Downpipes) of most car model such as VW Audi etc.
  • Brilliant Sealing: Superior Sealing capability prevent Exhaust gas and Noise from Leaking, Tight but without distoring the pipe.
  • Durable Material: Thickened and widened stainless steel for long service life, Anti-Corrosion, Rust prevention, Clean and Bright Apperance.
  • Easy Installation: Easy to install without welding and drilling, Removable and Reusable.
Check Stock

Lisle 38350 Exhaust Hanger Removal Pliers

  • This tool separates the rubber supports from exhaust hanger brackets..
  • The tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports..
  • The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier..
  • The tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports. The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier..
Check Stock

DNA Motoring CBE-HC922 2.25 Inches Stainless Steel 15-25 Horsepower Low End Torque Catback Exhaust System Smooth Tone Sound Removable Silencer Compatible with 92-00 Honda Civic Coupe / Sedan

  • STRENGTH CONSTRUCTION - Made of high quality T-304 stainless steel with computerized mandrel-bends, which ensures the strength and durability to use.....
  • HIGH PERFORMANCE - Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone sound while ensures smooth....
  • GOOD DESIGN - The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect....
  • MUFFLER & DIMENSION - 4.0"(OD) removable silencer muffler tip. 2.25"(ID) Inlet / 2.25"(OD) main piping..
  • FITMENT - Compatible with 92-00 Honda Civic Coupe / Sedan. Performance full catback kit EJ EG EM..
Check Stock

51mm Motorcycle Exhaust Pipe Muffler Silencer, Universal Stainless Steel DB Killer Noise Eliminator Sound Eliminator For Most of Motorcycle

  • 【Lower Noise Muffler】This muffler can effectively reduces DB sound levels from louder exhaust systems..
  • 【High Performance】This exhaust pipe is crafted by professional manufacturer. The new motorcycle exhaust pipe which makes the exhaust smoother and improve the power.Effectively reduces DB sound levels from louder aftermarket exhaust systems. Fashion design style, a great accessory to dress up your rides..
  • 【Good Quality】This exhaust pipe is made of high grade stainless steel,it is of high temperature, superior longevity, strong practicability and durable in use..
  • 【Good Looking】Exquisite workmanship and fashionable design, it will enhance the look of your motorcycle.Exquisite workmanship and fashionable design will enhance the look of your motorcycle..
  • 【Fitment】This is a universal removable Exhaust Pipe Muffler Insert DB Killer with premium quality. The muffer silencer is fit for the most motorcycles with 51mm diameter models..
Check Stock

2 Bottles of New BG 44K Platinum

  • Increase power, performance, mileage and save gas: Cleans by not only the entire emissions and exhaust system, but the fuel system as well. Works with gasoline, ethanol and hybrid vehicles..
  • Save on expensive fuel system and emission control repairs: Regular use every 5,000 miles tunes-up the fuel, emissions and exhaust systems keeping them clean and preventing the CEL light from returning..
  • Will not void manufacturer’s new vehicle warranty: Specifically designed and safe to use on vehicles which have oxygen sensors and catalytic converters. Exceeds EPA compliance performance criteria..
  • Works on all fuel injected, direct injected, carbureted, turbo, GTDI, Ecotec and EcoBoost engines..
  • Clean fuel and exhaust systems reduce excess exhaust hydrocarbon, CO and NOX emissions and saves gas..
Check Stock

2PCS Car Exhaust Rubber Muffler Hanger, 2 Holes 11mm (0.43inch), Universal Muffler Bracket Mount, Exhaust High Density Rubber Insulator Muffler Hanger (Black)

  • Universal Accessory: This rubber exhaust hanger fits most cars that use an easily replaceable hanger system and consists of two holes and a rubber lined insulator bracket. Please be sure to check the size and distance of the hooks before use to ensure the product is suitable for use..
  • High quality rubber: The exhaust pipe insulator hanger is made of high quality, high density rubber. It is heat resistant and durable for long term use. This is a standard automotive part used to replace exhaust systems..
  • Depth: 20mm (0.8") Hole diameter. 11mm (0.43"). It is a universal vehicle tool for exhaust systems of cars, trucks, Jeeps and SUVs. Please make sure to measure the size before purchase to avoid improper use..
  • Installation: First use the exhaust hanger removal tool to remove the muffler hanger from the exhaust system. Then hang the new exhaust hanger on the mounting pegs attached to the chassis. Finally, hang the other end of the exhaust hanger on the exhaust pipe mounting pegs..
  • What you will get: 2 x rubber exhaust hanger, this rubber exhaust hanger is essential to effectively reduce the sound generated by rocking and hitting the car body, reduce the height and contact surface of the exhaust pipe with th....
Check Stock