Reviews Cat40 Tool Holder

Pointer Knob, 1-1/8, 1/4X1/2 PH, 8-32 SS

  • Made from alloy steel 5155 with heat treat to RC 56-58.
  • Head Diameter?0.747" Head Angle ?15° Drawbar Thread Size?5/8"-11 Machine Taper Size ?CAT40 Neck Diameter?0.549" Hole?0.281" Pilot?0.641" Overall Length?2.001" Shoulder To Head?0.787" Shoulder To End?1.024".
  • High quality black oxide finish to ensure long enduring tool life.
  • Each retention knob is individually magnetic particle tested to ensure free of crack.
  • Fully ground on all critical surface including a pilot under the flange of retention knob for full contact between tool holder's taper end and retention knob.
Check Stock

Cable Matters 5-Pack Shielded RJ45 Cat 8, Cat8 Keystone Jack

  • ...8 performance in an RJ45 keystone jack for a 10GBASE-T, 25GBASE-T or even a 40GBASE-T channel compliant network up to 30 meters.
  • Fully backwards compatible with Cat 5e (Cat5e), Cat 6 (Cat6), or Cat 6A (Cat6A) Ethernet networks.
  • 180 degree easy termination jack supports impact tool-free, or crimp tool termination for Cat 8 cables.
  • A 180 degree wide-angle, hinged design with a removable cap provides easy access and termination of bulky Shielded cable.
  • IDC modules can be wired for T568A or T568B wiring.
  • compatible with Cable Matters Cat 8 Easy Crimp Tool for Metal Keystone Jacks (Model 180088).
  • Superior construction combines a one piece metal keystone with an integrated silencing cylinder to suppress EMI and NEXT electromagnetic noise and crosstalk.
  • Copper foil tape and cable ties ensure a professional installation and additional shield.
  • Snap-in Cat8 keystone jack with a retaining clip ensures a secure connection.
  • PoE plus compliant with IEEE 802.3at Power over Ethernet (PoE+) network applications.
  • Supports Cat8 auto-negotiation for compatibility with mixed network server speeds from 1 Gig to 40 Gig.
Check Stock

TRENDnet Punch Down Tool With 110 And Krone Blade Insert & Cut Terminations In One Operation Precision Blades Are Interchangeable & Reversible Network Punch Tool Grey TC-PDT

  • DIVERSE USAGE: The punch down tool inserts and cuts terminations in one simple operation for cat6a cat6 cat5e cat5 network cables. Install wires into....
  • BLADE STORAGE: This network punch down tool is designed with a twist and lock holder for spare blade storage that helps prevent blade loss.
  • PRECISE INTERCHANGEABLE & REVERSIBLE BLADES: The precision blades for the punch down tool are conveniently interchangeable and reversible between 110....
  • ERGONOMIC DESIGN: This network tool is designed with an easy to handle comfort grip.
  • MANUFACTURER PROTECTION: TRENDNet supports this network punch down tool with a 1 year protection.
Check Stock

Shars CAT40 Universal H/V CNC Tool Holder Tightening Fixture 202-2612 A

  • Multiple usage on tool holder tapers NMTB (ISO), CAT, DIN.
  • Efficiently designed for maximum protection of tool holder.
  • Enables strong gripping power of cutting tools in horizontal & vertical positions.
  • Light weight and compact design for mounting on work table or tool cart.
Check Stock

WFLNHB BXA 250-204 Tool Holder Quick Change Tool Post Holder 10-15 Inch Swing

  • This BT40 Universal CNC fixture tightening tool has multiple uses and includes NMTB (ISO) and DIN tapers..
  • BT40 Universal Horizontal Vertical CNC Tool Holder.
  • It is designed to provide maximum protection for the tool holder that has extraordinary gripping power for cutting tools in horizontal and vertical positions..
  • High hardness and durable. The tightening fixture is lightweight and compact making it easy to mount on a work table or tool cart..
  • Package Include: 1 x Tightening Fixture..
Check Stock

Savannah - 7586 Carbide Turning Tool Large Size (3 Piece Set - All 3 Turning Tools) Includes Diamond Shape, Round and Square Turning Tools With Comfort Grip Handles, Three Tool Set

  • ●PACKAGE : you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 11 pieces CNMG 431,11 pieces WNMG 431, 11 pieces TNMG 331 indexable carbide turning insert blades, cufficient quantity and easy to replace..
  • ●MATERIAL : lathe indexable carbide turning tool holders are made of quality 40Cr steel.
  • The 40Cr steel material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use TIN coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability..
  • ●SIZE : diameter of the holder is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • each tool holder has a black oxidized smooth surface..
  • ●EASY TO STORE : 33pieces indexable carbide turning inserts into 3 plastic boxes , each turning tool holder is placed in a plastic box, and Each box has a clear mark for easy identification of the product model, safe and easy to store..
  • ●MAYBE YOU NEED : If you need 5/8" left hand turning holder set, you can search for ASIN : B07B8XNH98 to buy it..
Check Stock

Professional Impact 110 Ethernet Punch Down Tool with Enlarged Blade Storage for 110/66 Blades, Impact Terminal Insertion Tools for CAT5/6, CAT5E/6E Network Cables

  • [Easy to Use] The punch down tool inserts and cuts terminations in one simple operation for CAT5/6,CAT5E/6E Network Cables. Install wires into a telephone socket, CAT5E faceplate or patch panel..
  • [Blade Settings] Twist-lock blade holder allows quick and easy blade replacement and prevents blades from falling, designed with a twist and lock holder at the handle end for spare blade storage that helps prevent blade loss..
  • [High Quality] Equipped with two specifications of blades for replacement (110/88 and 110/66), the cutter head is made of high-quality materials, durable and accurate, reducing the frequency of replacement..
  • [Ergonomic Design] The Punch Down Tool is designed with an easy to handle comfort grip..
  • [Service Guarantee] You can return them to us at any time when you are not satisfied with our products, we will refund or replace the new product for you. Your opinion on products and services is our most desired gift. Please contact us in time. Thank you..
Check Stock

Wiha - Insulated T-Handle Hex Inch 5/16 - 33486

  • Engineered Nylon 11 injection molded to tool for maximum personal protection for “Live Line” applications.
  • Every tool is 100% inspected— tested to 10,000 volts and rated to 1,000 volts.
  • Cut, abrasion and impact resistant—virtually indestructible with an industry-leading lifetime limited warranty.
  • Withstands extreme temperatures from -40° F to 158° F (-40° C to 70° C) and meets stringent requirements for CAT “C” - cold impact rating.
  • Exceeds International Standards: IEC 60900:2012 and ASTM F1505.
Check Stock

40 Pairs Dragon Eye Safety Eye for Stuffed Animal Doll Making with Washer Craft Eyes Teddy Bear Amigurumi Crochet Toy 16mm

  • Material: glass dragon eye with plastic eyes holder and plastic washer.
  • Size of the eye : 16x16mm, size of the eye holder 20mm.
  • Package includes : 40 pairs eyes and 80pcs safety eye washers, there are 20 styles, you will get 2 pairs of each, so total you will receive 40 pairs in the package..
  • Safety eyes are very suitable for hand-made doll and amigurumi project and craft making, perfect for all kinds of stuffed animals crochet puppets, teddy bears dragondog wolf ,snake etc.
  • These safety eyes have 20 styles animal dragon eyes cat eyes, They are made by glass eye cabochon glued on the eye holder..
Check Stock

WellMall Tool Storage Organizer Holder - Wall Mount Style for Power Tool Drill as Heavy Duty Tool Shelf & Tool Rack with Compact Design

  • [Well Organized] WellMall power tool organizer can turn your tools mess workbench or wasted wall space into a tidy and high efficiency working place, which by a glance at the all tools on the wall mount tool holder. Especially for power tools like drills..
  • [Much More Loading Capacity] This power tool holder with heavy duty design would help you to load maximum 100 lb tools by using all 4 wall mount anchors. This power tool storage, for top shelf max load 40 lb and below 4 tool slots with max capacity 80 lb..
  • [Sturdier Slots] By updating with 3 point welding (others just 2 point welding), this tools organizer will help your tool rack's slots much sturdy. Preventing drill holder wall mount won't be broke and bent easily, which can protect your power tools..
  • [Compact Design & Muti-use Workplace] 16" width, 7.48" height and 5.51" depth, WellMall tool organizers and storage holder with 4 installation holes and 3.95inch between each would be a ideal choice for mounting on the correct pegboard. Also a great choice for be mounted on the wood wall or cement wall, idea as workshop organizers and storage..
  • [After-sales service] About any electric tool rack installation questions you can contact us at any time, and best service & help will be provided. Also this gar....
Check Stock

SHZOND Collet Set CNC CAT40 Tooling Package ER32 ER16 Collet Set Mill Holder Spanner Drill Chuck (collet set)

  • The collet set comes with 12PC CAT 40 ER32 collets set by 1/16 and 10PC CAT40 ER 16 collets set by 1/32.
  • All collet chuck are high speed proved,high speed true balance in 15-20K RPM.
  • Tenth Accuracy 0.0001in on each ER chuck and collet. Both ER32 and ER16 Chuck Gage or projection length of ER16 is 2.75in.
  • Hardened and ground to ensure maximum accuracy.Through spindle coolant capability from pull stud to collets.
  • Ideal for milling machine, drilling machine or holder, etc.
Check Stock

SHZOND Collet Set CNC CAT40 Tooling Package ER32 ER16 Collet Set Mill Holder Spanner Drill Chuck (collet set)

  • The collet set comes with 12PC CAT 40 ER32 collets set by 1/16 and 10PC CAT40 ER 16 collets set by 1/32.
  • All collet chuck are high speed proved,high speed true balance in 15-20K RPM.
  • Tenth Accuracy 0.0001in on each ER chuck and collet. Both ER32 and ER16 Chuck Gage or projection length of ER16 is 2.75in.
  • Hardened and ground to ensure maximum accuracy.Through spindle coolant capability from pull stud to collets.
  • Ideal for milling machine, drilling machine or holder, etc.
Check Stock

Cable Matters 200-Pack Nail-in Cable Clips Cord Organizer

  • Nail-in cable organizer provides snug and secure placement of an LMR 240, RG8X, RG58 or RG59 coax cable, RG6 digital video coaxial cable, digital audio coaxial cable, Ethernet Cat 5 or Cat 6 network cable, 12 to 16 AWG speaker wire, phone wire, USB cable, or slim video cable.
  • The cord holder supports most cables with a 7mm outside diameter or smaller.
  • Handy cord management alternative to wire mold, raceway, cable holder, or conduit.
  • Ideal solution for routing cables such as a short run TV coaxial cable in a home theater setup or a long run antenna cable in an office warehouse.
  • Organize and route cables along baseboards or wood trim molding with these cord clips.
  • Run cables in tight spaces around door frames through the wire clips with the confidence that they will remain in place.
  • Secure cable management clips prevent tripping hazards for kids or pets.
  • The cord keeper secures most round electrical cords of small appliances and electronics to prevent accidental disconnection and provide a clean looking installation.
  • Convenient 200 pack wire holder clips come in a plastic container to store spare cable clips in your tool box or garage.
  • One piece cable clip with an integrated nail with no extra parts to lose.
Check Stock