Reviews Castle Cap Nuts

Spanner Nut Wrench for Locknut Removal and Tighten for pipe fitting and collet nut

  • Fits 1 1/4” OD Castle Nuts and Commercial Castle nuts..
  • Material: Heat Treated High Carbon Steel / Case Hardened and Black Powder coated.
  • Commonly used for plumbing, pipe fitting, fishing rods, safes, automotive suspension, and hitch.
  • Made in the USA / 100% Customer Satisfaction Guaranteed.
Check Stock

Spanner Nut Wrench for Locknut Wrench for Nut Removal and Tighten for pipe fitting and collet nut.

  • Fits all 1 1/4” OD Castle Nuts and Commercial Castle nuts..
  • Material: Heat Treated High Carbon Steel / Case Hardened and Black Oxide coated.
  • Commonly used for plumbing, pipe fitting, fishing rods, safes, automotive suspension, hitch.
  • Made in the USA / 100% Customer Satisfaction Guaranteed.
Check Stock

VIRTIONZ Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle -2pack

  • Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1".
  • 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4".
  • 2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Check Stock

1/4-20 Acorn Cap Nuts, 304 Stainless Steel 18-8, Plain Finish, Quantity 50

  • The stainless acorn cap nuts are 100% stainless steel 18-8 which offers a high level of chemical and corrosion resistance..
  • MewuDecor stainless six sided cap nuts are great for general applications and wet environments. They are strong, corrosion proof, and will support all of your project purposes..
  • Package Included: 50 PCS Cap Nuts 1/4-20..
  • Acorn Cap Nuts are great to have around for use in wood and wet environments..
Check Stock

The ROP Shop Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (1) Idler Hub with Lug Nuts, (1) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (2) Inner/Outer Bearings, (1) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (1) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop Pack of 4 Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle

  • Replacement (Pack of 4) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (4) Idler Hub with Lug Nuts, (4) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (8) Inner/Outer Bearings, (4) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (4) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

1/4-20 Acorn Cap Nuts, Stainless Steel 18-8 (304), Plain Finish, 50 PCS

  • The stainless acorn cap nuts are 100% stainless steel 18-8 (304) which offers a high level of chemical and corrosion resistance..
  • MewuDecor stainless six sided cap nuts are great for general applications and wet environments. They are strong, corrosion proof, and will support all of your project purposes..
  • Acorn Cap Nuts are great to have around for use in wood and wet environments..
Check Stock

The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

Sutemribor M3 M4 M5 Alloy Steel Socket Cap Screws Hex Head Bolt Nuts Assortment Kit (560 PCS)

  • √ Material: High quality alloy steel, corrosion resistant..
  • √ Size: M3 M4 M5 hex socket cap bolts screws nuts assortment kit..
  • √ Quantity: It contains 560pcs/12 sizes of the most commonly used alloy steel hex socket cap bolts screws nuts..
  • √ High quality alloy steel hex socket head cap screws nuts kit ensure life-time use, these quality assortment screws for home, automotive, and shop use..
  • √ Widely Application: Perfect for electrical connections on household and commercial appliances, automotive and marine uses in which the power source has a threaded/bolt-type connection..
Check Stock

Southwest Wheel R40842X 42 Spindle & 6-5.5\ Bolt Circle Trailer Hub

  • Pair of 1" straight spindles includes castle nuts and cotter pins..
  • Bearings included - (4) L-44643 1" inside dimension..
  • Hubs have pre-installed pressed in races..
  • Hub has a 4-bolt pattern on 4" bolt circle. Pilot diameter 2-1/2.
Check Stock

Southwest Wheel R20484X 84 Spindle & 5-4.5\ Bolt Circle Trailer Hub

  • Pair of 1-1/16" straight spindles includes castle nuts and cotter pins..
  • Bearings included - (4) L-44649 1-1/16" inside dimension.
  • Hubs have pre-installed pressed in races.
  • Hub has a 4-bolt pattern on 4" bolt circle. Pilot diameter 2-1/2.
Check Stock

Glarks 125Pcs 3-in-1 Furniture Connecting Hardware Set, Hex Socket Cap Furniture Barrel Screws Bolt Nuts & Cam Fitting & Pre-Inserted Nut & Eccentric Wheel for Crib, Wardrobe Splicing, Cabinet Drawer

  • ♛【Product Size】: Socket cap screws include 3 size of m6x30, m6x50, m6x70, barrel nuts is m6x12, m6x15.
  • ♛【What You Get】: In this furniture connection set, we offer 15pcs hex socket cap screws, 20pcs barrel nuts, 30pcs cam fittings, 30pcs eccentric wheel, 30pcs nylon pre-inserted nuts, total 125pcs well packed in a plastic box..
  • ♛【Product Feature】: Socket cap screws and barrel nuts with good match between them used for the manufacture of a solid joint for your furniture. Nylon pre-inserted nuts adopting expansion principle for perfect locking. These screw bolt nuts are perfect for replacing old crib screws and joining wood, boards..
  • Pre-inserted nut are made of high quality nylon.
  • eccentric wheel size is 32mm, 35mm, 40mm.
  • Cam fitting and eccentric wheel are made of alloy steel. They are strong and reliable for your furniture connection..
  • ♛【Wide Application】: Our 3-in-1 furniture connection can suitable for all types of furniture, cabinet, drawer, dresser, perfect used for crib, baby bed, headboard, desk, chairs, Wardrobe and other DIY projects..
  • Cam fittings size is 12mmx15mm. Due to manual measurement, there may be error of 0.1-0.3mm..
  • ♛【High Quality】: Furniture screws and barrel nuts are made of durable zinc plated steel....
Check Stock