Reviews Casting Iron Handwheel

awagas 8\ x 8\ Lab Scissor Jack, 200mm Stainless Steel Laboratory Lifting Platform Lab Lift Table Lab Jack Stand Rack Scissor Lab-Lift Lifter, Height Range from 85mm to 280mm Load Capacity 15Kg

  • ...se plate 200*200mm. The maximum load capacity is 15KG..
  • ❥【NOTE】100% brand new. There is a protective film on the surface of the product, PLEASE peel off the protective film before use! The protective film of the product may be warped or burrs, but it does not mean that the product has been used. Tightening the handwheel helps to maintain stability. But pay attention to the rotation force, and avoid excessive force causing the handwheel to be unable to tighten..
  • ❥【DURABLE AND ANTI-CORROSION MATERIAL】Lab lifting platform is made of sturdy and high-quality stainless steel material, anti-rust and corrosion resistant, strong and durable. Stainless steel top and bottom plate is NOT magnetic, galvanized iron stand is magnetic. The platform is flat, and the edge is not sharp..
  • ❥【STEADY HEIGHT ADJUSTMENT】Stainless steel laboratory scissor jack has a very firm and steady base and a stable structure, which makes the lifting very steady and not easy to shake! The lab lifting platform is composed of an upper panel, a lower base plate, a rotating shaft, and a handwheel. Place the lifting platform steadily, and rotate the handwheel to adjust the upper panel of the lifting platform to the desired height..
  • ❥【WIDE RANGE OF USES】The laboratory lifti....
Check Stock

Boltigen Upgrade Handle Adjustable RV Water Pressure Regulator Valve, Brass Lead-Free Reducer with Gauge 160PSI and 4 Inlet Screened Filters,for RV Camper, Travel Trailer, or Garden…

  • 【Adjustable Handwheel Design】The rv water pressure regulator valve designed with handle adjustment. Compared with the old RV water pressure regulator valve, this upgrade brass Lead-Free handle adjustable water pressure reducer is more convenient use and operation. Adjustable handle for easy pressure adjustment without any tools. Handle adjustable water pressure regulator for rv camper and travel trailer.
  • 【Product Standard】Maximum Regulator gauge rang 0-160 psi, water pressure setting can be easily adjusted by turning handwheel. Turn clockwise to increase pressure, turn counterclockwise to decrease pressure. And the adjustable rv water pressure regulator's size standard: 3/4" hose female inlet and 3/4" hose male outlet, fits for garden hose & 3/4" NH,compatible with America almost all water system.
  • 【No Lead-Free Material】The adjustable rv water pressure regulator valve is made of C46500 lead-free brass, manufactured by hot casting process technology. Our every adjustable rv water regulator is tested to contain less than 0.13% lead, well under the NSF lead-free requirements of 0.25%, safe and healthy for drinking system.
  • 【Adjustable RV Water Pressure Regulator Kit】The rv water pressure regulator valve kit comes with 1 adjustable rv water r....
Check Stock

Bulk Iron Filings- 1 LB Iron Filings for Science Experiments, by American Heritage Industries

  • Perfect for Cold Casting: Our Artmolds very fine Iron powder is perfect for cold casting and helps to make the iron made DIYs for your home and offices.
  • Very Fine Iron Particles: Our Artmolds Iron powder comes with 1lbs (453.6 Grams) and 325- Mesh powder which is considered as very fine and odourless particle for the cold casting and moulding.
  • Very Easy And Simple To Use: Our Artmolds Iron powder is a very simple and easy cold casting formula using polyurethane resin. Just combine, mix well and pour into the mold.
  • Your Creativity Will Never Lose Shine: Are you afraid if your collection may lose shine in future? Don't panic. Our artmolds iron powder contains very fine particles of iron and the shine can retain by just polishing using rosin and polishing wheel.
  • Mould your Creativity Into a Shape: Try our Artmolds fine particle Iron powder at your home and office decors and enhance your creativity level and feel artistic.
Check Stock

Boltigen Handle Adjustable RV Water Pressure Regulator with Gauge , 3/4’’ GHT 160PSI Lead-Free Brass RV Pressure Reducing Valve with 4 Inlet Screened Filters for RV Camper Travel Trailer Garden Hose

  • 【Handwheel Adjustable】Our new design water pressure regulator with adjustable handle, just use your hand to pull up the knob, turn it to adjust the pressure, no tool needs, easy to operation. The instruction is included in each packaging, don’t need to worry about how to install and use it..
  • 【Lead Free Brass】 Pressure regulator valve is made of C46500 lead-free brass, manufactured by hot casting process technology. Each regulator is tested to contain less than 0.13% lead, well under the NSF lead-free requirements of 0.25%, safe and healthy for drinking system..
  • 【Suitable Size】Adjustable Water Pressure Reducers have 3/4 GHT(NH) male and female thread which is compatible with America water system, factory setting pressure is 45 PSI, adjust pressure up to 160 PSI, water pressure setting can be easily adjusted by turning handwheel. Turn clockwise to increase pressure, turn counterclockwise to decrease pressure..
  • 【Application】 The water pressure can be clearly seen on the gauge, regulator inlet screen mesh helps to filter out impurities in water. It's great for camper,trailer, RV, garden, plumbing System..
  • 【Guarantee】This lead free brass pressure reducing valve is well-designed. We 100% inspected them before they left our factory, If you....
Check Stock

ArtMolds Fine Iron Powder for Cold Casting and Molding - Polyurethane Resin for Making Sculptures and Statues | Home and Office Decors - 1 Lb/325-mesh

  • Perfect for Cold Casting: Our Artmolds very fine Iron powder is perfect for cold casting and helps to make the iron made DIYs for your home and offices.
  • Very Fine Iron Particles: Our Artmolds Iron powder comes with 1lbs (453.6 Grams) and 325- Mesh powder which is considered as very fine and odourless particle for the cold casting and moulding.
  • Very Easy And Simple To Use: Our Artmolds Iron powder is a very simple and easy cold casting formula using polyurethane resin. Just combine, mix well and pour into the mold.
  • Your Creativity Will Never Lose Shine: Are you afraid if your collection may lose shine in future? Don't panic. Our artmolds iron powder contains very fine particles of iron and the shine can retain by just polishing using rosin and polishing wheel.
  • Mould your Creativity Into a Shape: Try our Artmolds fine particle Iron powder at your home and office decors and enhance your creativity level and feel artistic.
Check Stock

TECHTONGDA Sugar Cane Juicer Machine Manual Sugarcane Juice Machine Commercial Sugar Cane Press Extractor Sugar Cane Juice Squeezer with Handwheel and 2 Knives for Homes and Shops

  • @【Manual Operation】~Output: 110-330 lb/h (50-150 kg/h).
  • Juice Extraction Rate: (60-80) / 100. Manually operated with a hand crank pulley that is....
  • @【Adjustable Knobs】~Manual sugarcane juice machine equipped with two adjustable knobs, you can adjust to control the gap between the roller based....
  • @【High performance】~This sugar cane juicer machine can fit up to 2 inch thick sugar cane.
  • Designed with three heavy duty stainless iron rollers....
  • @【Need Caution】~The installation of the handwheel needs to be aligned. If the handwheel is not easy to install, please remove the paint on the....
  • @【Widely Application】~This commercial sugar cane press extractor is super-efficient and well built.
  • you could drink directly after pressing.....
Check Stock

Shop Fox W1674 2 HP Shaper

  • Split adjustable T-Slot fence with built in dust port.
Check Stock

Bon Tool 11-904 Square Bead Jointer - 1\ X 3/8\ - Wood Handle

  • SUPERIOR FINISH AND QUIETER CUT: Helical cutterhead with 56 indexable carbide inserts..
  • STRENGTH AND DURABILITY: Heavy-duty cast iron and steel construction..
  • CONSISTENT POWER: Powerful 3-HP induction motor..
  • ACCURACY: Large handwheel for quick and precise adjustments of planer table..
  • STABILITY: Heavy-duty, one-piece steel closed stand includes mounting tabs..
Check Stock

5V 4 Terminal CNC Eletronic Hand Wheel, 60mm Diameter Rotary Manual Pulse Generator Encoder for CNC System

  • [4 terminal]:This CNC electronic handwheel has 4 terminal, the diameter is 60mm..
  • [Easy installation]:This handwheel is easy to install and use..
  • [Application]:Widely used for CNC numerical control system, such as CNC lathes, CNC grinding machines, CNC milling machines, engraving machines,etc..
  • [Durable to use]:This electronic handwheel made of high grade metal and plastic, durable and reliable to use..
  • [A great replacement]:This hand wheel is a great replacement to replace the broken one..
Check Stock

QWORK Hand Wheel with Revolving Handle, 3.94\ Round Removable Hand Crank Revolving Handwheel for Woodworking, Printing, Machinery

  • Package contents: 1 x Round handwheel (mounting screws not included)..
  • Overall Handwheel Diameter: 100 mm/3.94 in, Center hole diameter: 12 mm/0.47 in., keyway width: 4 mm..
  • Design: Swing handle, handwheel with threaded holes, easy to install and remove.
  • Easy to Insatallation: The hole size conforms to the standard shaft diameter and can be removed by tapping..
  • Application: Suitable for printing, woodworking, machinery,packaging equipment, hardware tools, especially for industrial machine tools, such as milling machines, lathes, grinding machines, etc..
Check Stock

Powermatic 15HH, 15-Inch Planer, Helical Head, 3HP, 1Ph 230V (1791213)

  • HELICAL CUTTERHEAD WITH 74 FOUR-SIDED CARBIDE INSERTS: Smoother, quieter cutting and finer finish than conventional knives..
  • ANGLED DUST CHUTE WITH 4" PORT: Provides efficient chip and dust collection..
  • THREE V-BELTS: Transfer maximum power to the cutterhead..
  • TWO-SPEED GEARBOX: Features an automatic chain tensioner..
  • LARGE, CAST IRON HANDWHEEL: Positions table quickly and easily..
Check Stock

Lifeline Kettlebell Weight for Whole-Body Strength Training 16 kg/35 lb - Bright Yellow

  • Premium quality, Lifeline Kettlebells are made with virgin iron ore, not scrap, and formed into a strong, balanced, single-piece casting with a flat wobble-free base. Made with a clean, consistent surface and durable powder-coat finish.
  • Premium Material: We start with high quality first run iron ore, not scrap.
  • Void Free Surface: We use a proprietary casting process that ensures each kettlebell has the highest quality and the best surface possible. This creates a smooth, comfortable handle and premium appearance.
  • Precision Casting: The Lifeline Kettlebell is cast in one solid piece, this results in a stronger, more durable handle. Precision casting creates kettlebells with no seams, burrs, welded handles or rough spots.
Check Stock

Powermatic PJ-882HH, 8-Inch Parallelogram Jointer, Helical Head, 2 HP, 1Ph 230V (1610082)

  • 54 FOUR-SIDED CARBIDE INSERTS: Provides smoother, quieter cutting and a superior finer finish..
  • LARGE 8″ X 82″ PRECISION-GROUND CAST IRON TABLE: For heavy-duty work..
  • NON-MAR FENCE INSERT: Protects table surface..
  • HANDWHEEL-OPERATED WORM GEAR SYSTEM: For smooth fence tilting..
  • PARALLELOGRAM DESIGN: Close table-to-cutterhead proximity and fast depth of cut adjustments..
Check Stock