Reviews Casting Expansion

NOVA3D Wax Resin for LCD 3D Printer 405nm UV-Curing 3D Printer Resin to Jewelry Design Dental & Garage Kits 1000ml

  • 【3d Resin】IFUN 3d casting resin uses special formulas, featuring low thermal expansion coefficient, burns out at high temperature, leaving no....
  • 【Easy to Casting】IFUN 3d resin. No residue, no sand pit, smooth surface, low casting temperature, short casting time. Easy to print a variety of....
  • 【High Precision】This 3d cast resin printing model features smooth surface, showing high precision in details, perfect to cast jewelry..
  • 【Wide Applications】IFUN castable resin has been designed to cast your pieces in bronze, copper, tin or iron, using standard vacuum investment....
  • 【Notice】Please shake well before use. Printed models need to use concentration of 95% alcohol to clean..
Check Stock

RESIONE 3D Printer Resin C01 Dental Castable Resin High Precision for Direct Investment Casting Excellent Fluidity No Post-Curing Required for 3D Printing

  • 【3d Resin】IFUN 3d casting resin uses special formulas, featuring low thermal expansion coefficient, burns out at high temperature, leaving no....
  • 【Easy to Casting】IFUN 3d resin. No residue, no sand pit, smooth surface, low casting temperature, short casting time. Easy to print a variety of....
  • 【High Precision】This 3d cast resin printing model features smooth surface, showing high precision in details, perfect to cast jewelry..
  • 【Wide Applications】IFUN castable resin has been designed to cast your pieces in bronze, copper, tin or iron, using standard vacuum investment....
  • 【Notice】Please shake well before use. Printed models need to use concentration of 95% alcohol to clean..
Check Stock

4 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (Quart Kit)

  • Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • 4LB. Density polyurethane flotation Foam Quart Kit.
  • Consists of 1 pint of Part A and 1 pint of Part B and produces 1/2 cubic foot..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • The 4LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications.
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

6 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boats, Dock Flotation, Carving, Soundproofing, Filling Voids, and Insulation (Quart Kit)

  • Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • 6LB. Density polyurethane flotation Foam 1 Quart Kit.
  • Consists of 1 Pint of Part A and 1 Pint of Part B and produces 0.375 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • The 6LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications.
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

4 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (2 Quart Kit)

  • Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • 4LB. Density polyurethane flotation Foam 1/2 Gallon Kit.
  • Consists of 1 quart of Part A and 1 quart of Part B and produces 1 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • The 4LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications.
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

4 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (1 Gallon Kit)

  • Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • 4LB. Density polyurethane flotation Foam 1 Gallon Kit.
  • Consists of 1/2 gallon of Part A and 1/2 gallon of Part B and produces 2 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • The 4LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications.
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

Ultracal 30 Gypsum Cement 2.5 lbs / 1.13 kg - Plaster - For Mold Making and Casting Ideal for Latex Molds! Takes Excellent Detail

  • Ultracal 30 Gypsum Cement for Professional Molding and Plaster Casting.
  • Professional Use Only. Can Get Hot When Hardening!.
Check Stock

AHL Piston Rings for Honda CBR250 CBR19 MC19 KY1 (STD 48.5mm)

  • Kit Includes 2 Compression Rings, 1 Oil Ring & 2 Scraper Rings (you get exactly what is pictured).
  • Rings are for standard bore size - 74.00mm.
  • Reflects combustion heat and reduces carbon buildup, protecting the top of the piston. Some tests have shown this feature can increase horsepower and fuel economy by up to 6%.
  • Hypereutectic Casting Process Provides higher silicon content for reduced expansion rates and additional wear resistance.
  • it also has an ability to withstand higher cylinder temperatures.
Check Stock

4 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (2 Gallon Kit)

  • ...ts liquids such as water, gas, and oil from penetrating.
  • once fully cured, foam is compatible with epoxy, polyester or vinyl ester resins, and can be painted.
  • IDEAL WORKING TEMPERATURE IS 75-85°F. Proper temperature, mixing, timing and venting are critical for proper foam expansion.
  • the foam expands rapidly after mixing, so prep the surface in advance and be ready to pour.
  • AVAILABLE IN A 2 QUART KIT AND A 2 GALLON KIT. Yield: 2-Quart Kit – 3/4 cubic ft, 2-Gallon Kit – 3 cubic ft.
  • Flotation Range for 6lb foam: 23 lbs per mixed 2 quart kit and 92 lbs per mixed 2 gallon kit.
Check Stock

TotalBoat 6 Lb Density Expanding Foam Kit, 2 Part Closed Cell Polyurethane Liquid Foam for Boat Flotation, Casting, Carving, Sculpture, Reinforcement and Void Filling (2 Gallon Kit)

  • TWO-PART, MARINE GRADE EXPANDING FOAM cures very hard and rigid, with high compressive strength ideal for a number of marine and residential applications, including structural reinforcement, architectural castings, art projects and flotation.
  • 6 POUNDS PER CUBIC FOOT HIGH-DENSITY FORMULA is perfect for casting, carving, sculpture, plug making, sign making, flotation for boats and buoys, floating decoys, part fabrication, replicating wooden parts, rigidifying, structural support and more.
  • FAST-SETTING, CURES TO A 94% CLOSED CELL FOAM, where each cell traps air and prevents liquids such as water, gas, and oil from penetrating.
  • once fully cured, foam is compatible with epoxy, polyester or vinyl ester resins, and can be painted.
  • IDEAL WORKING TEMPERATURE IS 75-85°F. Proper temperature, mixing, timing and venting are critical for proper foam expansion.
  • the foam expands rapidly after mixing, so prep the surface in advance and be ready to pour.
  • AVAILABLE IN A 2 QUART KIT AND A 2 GALLON KIT. Yield: 2-Quart Kit – 3/4 cubic ft, 2-Gallon Kit – 3 cubic ft.
  • Flotation Range for 6lb foam: 23 lbs per mixed 2 quart kit and 92 lbs per mixed 2 gallon kit.
Check Stock

Motorcycle Handlebar Ends - APE RACING Universal Billet Aluminum Bar End Cap Plugs Weights For 7/8\ bars or 1 1/8\ Fat Bars Fit Any Motorcycle Dirt bike Scooter with Hollow Handlebars

  • ✔️HEAVEY DUTY - Made by billet 6061-T6 aluminum with completely CNC machined and hard anodized. We DON'T USE CASTING aluminum..
  • ✔️UNIVERSAL FITMENT - TWO sizes of aluminum expansion tubes allow our ends fits wide range of motorcycles, dirt bikes and scooters whether they have 7/8.
Check Stock

MAX TCR A/B 1-Gallon Kit ⁂ Epoxy Resin for Floral Arrangements ⁂ Creates Clear Water Simulation for Flower Arrangements ⁂ Long Working Time ⁂ Cures Flexible to Prevent Glass Vase Breakage

  • Water Clear Casting For Floral Arrangements ● Low Viscosity● ● Slow Cure To Reduce Yellowing ● Water Clear ● Silk Flowers Pull Resistant After 24 To 36 Hour Cure.
  • Very Flexible To Allow Expansion And Contraction ● Reduce Glass Vase Breakage.
  • Excellent Adhesion To Containers Or Vases Made From Glass, Ceramic, Clay, Stone Pottery.
  • Working Time: 120 Minutes @ 77°F (25ºC) (500 gram mass).
Check Stock

Niimo Hand Casting Kit Couples - Wedding Gift, Hand Mold Kit Couples, Plaster Hand Mold Casting Kit, Engagement Gifts for Couples, Couples Gifts, Newlywed Gifts for Couples, Gifts for Husband

  • EVERLASTING MEMORIES: Create a unique hand cast with your favorite person using our plaster hand casting kit couples, perfect for creating memories! This hand mold kit couples unforgettable moments, offering a lasting memory through our casting kit and hand mold..
  • EASY TO USE: Craft a unique hand sculpture with our hand casting kit couples and share the fun with your loved ones! This plaster hand mold casting kit offers a simple hand mold kit experience, perfect for creating lasting memories with our hand mold kit and casting kit..
  • DERMATOLOGICALLY TESTED: Craft intricate and personalized casting molds using our professional-quality hand casting kit couples, an ideal choice for couples gifts or engagement gifts. This hand mold kit couples includes a skin-friendly molding mixture and plaster, designed for 2 hands..
  • PERSONALIZED GIFT: Discover the perfect hand casting kit for engagement gifts for couples, newlywed gifts, or other special occasions. Celebrate anniversaries, surprise your spouse, or create a unique wedding gift with our hand mold kit couples, offering a DIY plaster hand mold casting experience..
Check Stock