Reviews Cast Iron Sump Pump

Wayne 57603-WYN1 1/2HP SUB CDT50 1/2 HP Cast Iron Submersible Sump Pump with Tether Float Switch, 0.5, Black

  • Indoors-Only Heavy Duty Pump: WAYNE 1/2 HP CDT50 Pump is an indoor area workhorse with rugged and durable design.
  • durable epoxy-coated and rugged cast iron construction with premium John Crane carbon/ceramic shaft seals for quality that lasts.
  • Customizable Operation: Piggy-back tether float switch for automatic or manual operation: 13" ON level and 7" OFF level.
  • unique top suction design reduces clogging and prevents air lock condition, so no need for weep holes.
  • Reliability Defined: Cast iron seal plate prevents leaks and galvanic corrosion.
  • engineered with upper and lower ball bearings in a sealed oil bath for virtually silent operation.
  • abrasion-resistant glass-reinforced polycarbonate impeller for reliability.
  • Additional Features: 1.5” NPT discharge for compliance with building codes.
  • 8 ft water-resistant power cord provides easy access to nearby GFCI protected outlet.
  • for easy installation, use in 14” diameter or larger sump basins.
  • Quality You Deserve: Proudly assembled in the USA for quality you can trust.
  • warrantied for 2 years for dependable, efficient, & ultra-quiet performance.
  • Assembled in the US with foreign and domestic parts..
  • Top suction pump design eliminates air locks and clogging from debris in bottom of sump pit.
Check Stock

Little Giant Select Series LG-S50T 115-Volt, 1/2 HP, 4300 GPH Cast Iron Sump Pump with Tethered Switch, Blue, 14942675

  • APPLICATIONS: This automatic, heavy duty, cast iron sump pump with tethered switch is ideal for use in residential sump systems or emergency water removal applications.
  • AUTOMATIC PUMP: activates when water reaches 12 to 14 inches, shuts off when water drops to 4 to 6 inches.
  • piggy-back design allows switch to be overridden for emergency water removal or testing.
  • BUILT TO LAST: rugged cast iron volute, housing, motor cover and non-clog type impeller is capable of passing 3/8-inch diameter semi-solids.
  • also features a carbon/ceramic shaft seal.
  • ENERGY-EFFICIENT MOTOR: Permanent Split Capacitor (PSC) motor, 115 Volts, 5.3 Amps, 507 Watts, 60 Hz., thermally protected.
  • PUMP SPECIFICATIONS: 1.5-inch FNPT discharge, 10-ft. power cord, 4300 GPM at 0-ft. lift.
  • 5.5 inches x 8.0 inches x 10.5 inches high.
Check Stock

VEVOR 1.5 HP Submersible Cast Iron and Steel Sump Pump, 6000 GPH Submersible Water Pump with Integrated Vertical Float Switch, for Basement Water Basin and Flooding Area

  • ...t is perfect to keep your basement dry during a heavy water flow like rain, snow melting, etc. Using your new sump pump is gonna be a blast!.
  • Designed to Last: High-quality materials are guaranteed for high-quality results. The basement sump pump features a corrosion-proof cast iron frame with a rust-proof surface and high-quality stainless steel for long-lasting underwater use. It comes with an IPX8 waterproof rating and has achieved UL certification, so there is no need to worry about the quality..
  • Hands-free Operation: Wouldn't you prefer to sit from the comfort of your couch and let your pump do its job? Well, now you can! Thanks to the vertical float switch, our heavy-duty sump pump will start working automatically when the water level rises above 8.7" and stop working when the water level is below 4.7". It is designed for energy-saving and labor-saving use in draining applications. Relax and let your pump drain your worries away..
  • Designed Just for You: The water outlet diameter is 1-1/2" NPT, and a 1-1/4" NPT adaptor is provided for different sizes of hoses, more convenient and cost-effective....
Check Stock

Rainbro 1/2 HP Thermoplastic Submersible Sump Pump With Vertical Float Switch, Model# PSU050V

  • INDOOR USE ONLY - This 3/4 HP WAYNE basement sump pump is perfect to keep your basement dry during heavy water flow. Whether it’s rain, snow melting, etc. WAYNE model CDU980E can pump up to 5,490 GPH to keep your basement dry..
  • TOUGH AND DURABLE - Corrosion-resistant stainless steel motor housing and fasteners come with a cast-iron volute that provides long life in tough sump pump applications..
  • EFFICIENT DESIGN - The top suction design eliminates air lock and minimizes clogging from any debris in the bottom of the sump pit. Easy to install in about 15 minutes with no need to drill a weep hole!.
  • ADDITIONAL FEATURES - 1-1/2” NPT discharge for compliance with building codes. The vertical float switch has been tested to 1 million cycles for long-lasting use..
  • QUALITY YOU DESERVE - Proudly assembled in the USA for quality you can trust. Warrantied for 5 years for dependable, efficient, & ultra-quiet performance..
Check Stock

JACKEL 1/2 HP Pre-Plumbed Sump Pump System (Model: JPACK22S-250V)

  • 1/2 HP Sump Pump w Stainless Steel Housing, Cast Iron Volute, SJE-Rhombus Vertical Switch, Piggyback Plug.
  • Polyethylene Structural Foam Sump Basin ( 18 x 24 in. / 22 Gal. Capacity ).
  • Polyethylene Structural Foam Sump Basin Cover ( 1.5 in. Threaded Discharge Flange, 2 in. Threaded Vent Flange, 2-Hole Cord Grommet, Clear View Removable Inspection Plate and DrainTrap ).
  • 1.5 in. / 1.25 in. Check Valve and 4 in. Inlet Hub.
Check Stock

Little Giant 506160 6-CIA-ML 1/3 HP 2760 GPH 115-Volt Low Level Sump Pump, Blue

  • AUTOMATIC SUBMERSIBLE SUMP PUMP: designed for compact sump systems with integral diaphragm switch activates when water reaches 4 to 7 inches and shuts off when water drops down between 1.5 and 3.5 inches.
  • BUILT TO LAST: Epoxy-coated cast iron housing.
  • nitrile/carbon/ceramic mechanical shaft seal.
  • CONTINUOUS DUTY MOTOR: 1/3 HP shaded pole motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada.
  • APPLICATIONS: designed for compact sump pump systems and general water transfer application. Must sit in water to activate the switch..
Check Stock

WAYNE CDU800 1/2 HP Submersible Cast Iron and Steel Sump Pump With Integrated Vertical Float Switch

  • Indoor Use Only - This 1/2 HP WAYNE basement sump pump is perfect to keep your basement dry during heavy water flow. Whether it’s rain, snow melting, etc. WAYNE model CDU800 can pump up to 5,100 GPH to keep your basement dry..
  • Tough And Durable - Corrosion-resistant epoxy coated steel motor housing and stainless steel fasteners come with a cast-iron volute that provides long life in tough sump pump applications..
  • Efficient Design - The top suction design eliminates air lock and minimizes clogging from any debris in the bottom of the sump pit. Easy to install in about 15 minutes with no need to drill a weep hole!.
  • Additional Features - 1-1/2” NPT discharge for compliance with building codes. The vertical float switch has been tested to 1 million cycles for long-lasting use, up to 10 time more than our competitors..
  • Quality You Deserve - Proudly assembled in the USA for quality you can trust. Warrantied for 3 years for dependable, efficient, & ultra-quiet performance..
Check Stock

Pump, Grinder, 2 HP, 15a

  • Price For: Each Pump Body Material: Cast Iron Cord Length: 25 ft. Off Point: 8 GPM of Water @ 100 Ft. of Head: 9 Shaft Seal: Silicon Carbide/Double Viton Lip Motor RPM: 3450 Max Head – Pumps: 108 ft. Manufacturers Warranty Length: 3 Yr. GPM of Water @ 60 Ft. of Head: 42 HP: 2 GPM of Water @ 5 Ft. of Head: 50 Hz: 60 Input Phase AC: 1.
  • GPM of Water @ 15 Ft. of Head: 50 Max. Liquid Temp.: 140 Degrees F Max. Head: 108.0 ft. Voltage: 208/230 Amps: 15 GPM of Water @ 10 Ft. of Head: 50 Item – Grinder Pumps: Grinder Pump Item: Grinder Pump GPM of Water @ 80 Ft. of Head: 27 Base Material: Cast Iron Bearing Type: Upper and Lower Ball GPM of Water @ 35 Ft. of Head: 50 Pump RPM: 3450 GPM of Water @ 40 Ft. of Head: 48.
  • GPM of Water @ 30 Ft. of Head: 50 Switch Type: Tether Impeller Material: Stainless Steel On Point: 15 Handle: Yes Housing Material: Cast iron Max. Head – Pumps: 108 ft. GPM of Water @ 45 Ft. of Head: 48 GPM of Water @ 70 Ft. of Head: 35 Min. Sump Pit Dia.: 24″ GPM of Water @ 50 Ft. of Head: 46 GPM of Water @ 25 Ft. of Head: 50 Switch Type – Pumps: Tether Impeller Material – Pumps: Stainless Steel.
  • Cord Length – Pumps: 25 ft. Pump HP: 2 Height: 19-1/2″ Phase: 1 Motor Type: PSC Length: 12-1/2″ FNPT GPM of Water @ 55 Ft. of Head: 45 GPM....
Check Stock

Wayne 58321-WYN3 CDU980E 3/4 HP Submersible Cast Iron and Stainless Steel Sump Pump with Integrated Vertical Float Switch, Large, Silver

  • INDOOR USE ONLY - This 3/4 HP WAYNE basement sump pump is perfect to keep your basement dry during heavy water flow. Whether it’s rain, snow melting, etc. WAYNE model CDU980E can pump up to 5,490 GPH to keep your basement dry..
  • TOUGH AND DURABLE - Corrosion-resistant stainless steel motor housing and fasteners come with a cast-iron volute that provides long life in tough sump pump applications..
  • EFFICIENT DESIGN - The top suction design eliminates air lock and minimizes clogging from any debris in the bottom of the sump pit. Easy to install in about 15 minutes with no need to drill a weep hole!.
  • ADDITIONAL FEATURES - 1-1/2” NPT discharge for compliance with building codes. The vertical float switch has been tested to 1 million cycles for long-lasting use..
  • QUALITY YOU DESERVE - Proudly assembled in the USA for quality you can trust. Warrantied for 5 years for dependable, efficient, & ultra-quiet performance..
Check Stock

WAYNE - 1 HP Submersible Cast Iron and Stainless Steel Sump Pump with Integrated Vertical Float Switch - 6,100 Gallons Per Hour - Heavy Duty Basement Sump Pump

  • INDOOR USE ONLY - This 1 HP WAYNE basement sump pump is perfect to keep your basement dry during heavy water flow. Whether it’s rain, snow melting, etc. WAYNE model CDU1000 can pump up to 6,100 GPH to keep your basement dry..
  • TOUGH AND DURABLE - Corrosion-resistant stainless steel motor housing and fasteners come with a cast-iron volute that provides long life in tough sump pump applications.
  • EFFICIENT DESIGN - The top suction design eliminates air lock and minimizes clogging from any debris in the bottom of the sump pit. Easy to install in about 15 minutes with no need to drill a weep hole.
  • ADDITIONAL FEATURES - 1-1/2” NPT discharge for compliance with building codes. The vertical float switch has been tested to 1 million cycles for long-lasting use.
  • QUALITY YOU DESERVE - Proudly assembled in the USA for quality you can trust. Warrantied for 5 years for dependable, efficient, & ultra-quiet performance.
  • Assembled in the US with foreign and domestic parts..
Check Stock

Zoeller M53 Mighty-mate Submersible Sump Pump, 1/3 Hp (2)

  • 3/10 HP pump for residential sump pits or septic tanks.
  • 1½" discharge, passes 1/2" spherical solids.
  • Automatic model with integral float-activated switch.
  • Cast iron switch case, motor, and pump housing, plastic base.
  • Performance: 43 GPM at 19.25' TDH, 100% factory tested.
Check Stock

Superior Pump 92911 1/2 HP Cast Iron Primary Sump Pump and Backup Pump Kit , Black

  • Primary pump-pumps up to 4200 gallons per hour, pumps water up to 25 vertical feet.
  • Pre-assembled kit: Primary pump model 92511 cast iron sump pump and 12V DC backup pump.
  • Kit includes 87 decibel alarm, electronic control panel with indicator lights, battery box, mounting hardware, 2 AMP DC charger (12 volt deep cycle battery not included).
  • Vertical float switch on primary and backup pumps.
Check Stock

Superior Pump 92301 1/3 HP Cast Iron Pedestal Pump

  • 1/3 HP Sump pump moves up to 3,000 gallons per hour.
  • pump will lift water up to 20' of vertical height.
  • Stainless steel construction with cast iron base.
  • Durable stainless steel drive shaft, float ball and impeller.
  • 1-1/2 inch NPT discharge for high capacity pumping.
  • Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested.
Check Stock