Reviews Cas 64 17 5

V-Drill Guide Standard Hole Sizes 1/8-1/2 Inches - 2 Pack

  • STD1000DGNP V-DrillGuide (1/8-3/8") has 17 holes 1/64" increments (SAE) drill sizes: 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 23/64, 3/8".
  • STD2000DGNP V-DrillGuide (3/8-½") has 9 holes, in 1/64 increment (SAE) drill sizes: 3/8, 25/64, 13/32, 27/64, 7/16, 29/64, 15/32, 31/64, ½".
  • Portable, pocket-sized * Prevents drill bit wander * Centers the holes on pipes, dowels & outside corners.
  • Round stock hole alignment marks on one side * Special nickel alloyed steel heat-treated for durability.
  • Non-plated material with light oil coating to prevent rust * Non-glare finish with/Easy-to-read markings * American Engineered and Made in the USA.
Check Stock

ABN Hole Transfer Punch Set for Steel, Wood, Etc – SAE Transfer Set – 28 Piece Transfer Punch Set 3/32 to 17/32in

  • ...d hobbyists to use on metal, wood, and other surfaces.
  • Useful for a tool for die marker or repair, finding rifle stock screw and bolt hole locations, and even rock painting.
  • PERFECT SIZES: 4-7/8-inch (12.4cm) length of each punch with 0.0025-inch undersize for easy use.
  • Standard imperial SAE sizes include 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 11/64”, 3/16”, 13/64”, 7/32”, 15/64”, 1/4”, 17/64”, 9/32”, 19/64”, 5/16”, 21/64”, 11/32”, 23/64”, 3/8”, 25/64”, 13/32”, 27/64”, 7/16”, 29/64”, 15/32”, 31/64”, 1/2”, 17/32”.
  • BUILT TO LAST: Constructed from heat-treated tempered steel with a black oxide finish for maximum strength and longevity that resists corrosion and prevents rounding, mushrooming, or chipping of the conically-shaped (cone) tips.
  • Flat ends are slightly chamfered at the edge.
  • We recommend using these pieces as transfer punches – not intended to take place of a center punch.
  • EASY TO USE: Select one of the punches, hold punch shaft with one hand while gently tapping a hammer (not included) on the flat top of the punch to make a mark on your selected material that is visible for your center punch, then use your existing center punch (not included) to make a dimple.
Check Stock

9PC JUMBO SCREW EXTRACTOR SET BOLT STUD PIPE REMOVER EZ EASY OUT 5/64-1 1/16"

  • Heat Treated & Spiral Fluted Screw Extractors.
  • Included # 1 to #9 Jumbo Screw Extractor.
  • Drill Size : 5/64, 7/64, 5/32, 1/4, 17/64, 13/32, 17/32, 13/16, 1-1/16".
Check Stock

Norseman 22903 1/16 in - 1/2 in Super Premium Black and Gold Oxide Hi-Molybdenum Steel Drill Bit Set 29-Piece grey

  • Sizes: 1/16 in., 5/64 in., 3/32 in., 7/64 in., 1/8 in., 9/64 in., 5/32 in., 11/64 in., 3/16 in., 13/64 in., 7/32 in., 15/64 in., 1/4 in., 17/64 in., 9/32 in., 19/64 in., 5/16 in., 21/64 in., 11/32 in., 23/64 in., 3/8 in., 25/64 in., 13/32 in., 27/64 in., 7/16 in., 29/64 in., 15/32 in., 31/64 in., 1/2 in..
  • Drill through sheet metal, hard steel, acrylics and brass.
Check Stock

Vintage Forge Cream Curved Bottom Humbucker Pickup Mounting Ring Set (Bridge & Neck) compatible with Epiphone Guitars HR1800C-CRM

  • PROFESSIONAL QUALITY - Plastic curved bottom tapered humbucker pickup rings (2) in Cream finish.
  • COMPLETE SET - Includes both Neck and Bridge position rings.
  • TRADITIONAL FIT - A great replacement compatible with many Epiphone guitars and other similar import brands. Will NOT fit Gibson USA guitars. (*It is very important to measure your existing rings & hole spacing first to be sure. Mounting rings are not universal and there is no one-size-fits-all solution.).
  • DIMENSIONS: Outer Dimensions: 3 5/8" (92mm) x 1 13/16" (46mm) Interior Dimensions: 2 3/4 in. (70mm) x 1 17/32" (39mm) Body mounting holes spacing center to center: 3 17/64 in. (83mm) x 1 29/64" (37mm) Pickup mounting holes spacing center to center: 3 5/64" (78mm) Neck Ring Height: 5/32" (4mm) x 7/32" (5.5mm) Bridge Ring Height : 21/64" (8.5mm) x 23/64" (10mm).
  • BRAND NEW - Vintage Forge Factory Fresh Packaging.
Check Stock

Amazon Basics Titanium Drill Bit Set - 29-Piece, M35 High Speed Steel HSS, for Steel, Alloy and Other Hard Metals

  • 29 drill bits for cutting through hard metal, like stainless steel, aluminum alloy, and titanium alloy.
  • Drill bit sizes include: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64", and 1/2".
  • Made of M35 Co5% high-speed steel (HSS) with a titanium finish for rugged, reliable strength.
  • Precision grinding inclined blade helps ensure fast drilling, impressive cutting power, and excellent chip removal.
  • Case included for easy storage and transport.
  • backed by an Amazon Basics limited 1-year warranty.
Check Stock

Mushkin Enhanced Redline 32GB (2 x 16GB) DDR5 5200 (PC5 41600) Desktop Memory

  • 32GB DDR4 Dual Channel kit - two matched 16GB modules.
  • 288-pin memory modules, backed by Mushkin's lifetime warranty.
  • CAS latency of CL17 (17-17-17-38) at 1.25V.
  • Equipped with stylish red Frostbyte heatsinks for improved heat dissipation.
Check Stock

INTOO Hss Cobalt Drill Bits Set 29PCS Triangle Shank,Industry Drill bits with Golden Ratio Tip,

  • 003cb003eSPECIFICATIONS:003c/b003e29PCS COBALT DRILL BIT SET： 1/16,5/64,3/32,7/64,1/8,9/64,5/32,11/64,3/16,13/64,7/32,15/64,1/4,17/64,9/32,19/64,5/16,21/64,11/32,32/64,3/8,25/64,13/32,27/64,7/16,29/64,15/32,31/64,1/2. Sizes from 1/8 to 1/2 with triangle shank..
  • 003cb003eGOLDEN RATIO TIP:003c/b003eFrom size 5/32" with patented "Golden Ratio" Tip,which especially designed for heavy duty purpose, effect clean&smooth holes on hard metal like stainless steel,and moreover, at least 3 times longer life..
  • 003cb003eCOBALT 5% MATERIAL:003c/b003e suitable for stainless steel or any hard metal,significantly increases the ware-resistance and durability..
  • 003cb003eSTORAGE BOX:003c/b003estrong metal box..
  • 003cb003eHOW TO USE:003c/b003econtrolling the drilling speed by lowest RPM would make drill life much longer than 3 times..
Check Stock

19 Pcs Forstner Drill Bit Set 10-40mm (2/5\ to 1-4/7\) Hole Saw Wood Cutter Tool for Woodworking

  • ★【Feature】:Sharp edge,accurate,hardness,smooth cutting.
  • ★【Sizes】: 10mm(2/5"),12mm(8/17"),15mm(19/32"), 16mm(5/8"), 17mm(43/64"), 18mm(45/64"), 19mm(3/4"), 20mm(25/32"), 21mm(53/64"), 22mm(55/64"), 23mm(29/32"), 24mm(15/16"), 25mm(1"), 26mm(1-1/16"), 28mm(1-1/8"), 30mm(1-3/16"), 32mm(1-1/4"), 35mm(1-3/8"), 40mm(1-4/7").
  • ★【High-Quality Material】: Tungsten Steel.
  • ★【Application】: Perfect for Wood Cutter ,Drilling ,Hole Hinge,woodworking and DIY project..
  • ★【Service】Any questions feel free to contact us..
Check Stock

HHIP 2007-0023 21 Pieces HSS Interchangeable Pilot Counterbore Set

  • 14 pilots with a 5/32" shank including 0.187, 0.204, 0.213, 0.229, 1/4, 17/64, 9/32, 5/16, 21/64, 11/32, 3/8, 25/64, 13/32 and 7/16.
  • 6 counterbores including 5/16, 3/8, 7/16, 1/2, 9/16 and 5/8.
Check Stock

MH GLOBAL Interchangeable Pilot Counterbore Set 21Pcs/Set, Straight Shank

  • * 6 counterbores: 5/16'', 3/8'', 7/16'', 1/2'', 9/16'', And 5/8''.
  • * 14 Piolts With A 5/32'' Shank: 0.187'', 0.204'', 0.213'', 0.229'', 1/4'', 17/64'', 9/32'', 5/16'', 21/64'', 11/32'', 3/8'', 25/64'', 13/32'', And 7/16''.
Check Stock

MICROLUBROL M-77 LUBRICANT PASTE GREASE Silicone + Moly, 2 oz, Compare to Dow M-77

  • For automotive and heavy duty general industrial use. Compare to ingredients in Dow M-77..
  • Over 60% Molybdenum disulphide (CAS# 1317-33-5).
  • Dimethyl, phenylmethyl siloxane, trimethyl terminated (CAS# 63148-52-7).
  • 12-Hydroxy lithium stearate (CAS# 7620-77-1)..
  • contains NO mineral or petroleum oils so it is safe for most plastics and rubbers..
  • Extends the wear life of moving parts and equipment. Prevents galling during machinery running-in period..
  • Good water resistance. Good volatilization properties. Help protect against fretting corrosion and cold welding of moving joints..
Check Stock

Century Drill & Tool 26529 Pro Grade Cobalt Drill Set, 29 Piece, Made in The USA, for Stainless Steel and Hard Metal

  • Set includes 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64" and 1/2" cobalt drill bits.
  • Century Pro Grade drills are made from 5% industrial quality M35 cobalt alloy high speed steel..
  • Cobalt is extremely heat resistant, when used and operated in power units that have a RPM speed of 1,500 or more for maximum efficiency..
  • Lasts up to 12 times longer than the average consumer-grade high speed steel drill..
  • 135 degree quick-cut point penetrates faster and will not walk or wander at the starting surface. Does not require a center punch or pilot hole..
Check Stock