Reviews Carbon Weld Pipe

Upower 2.5 inlet 4.5 outlet Blue Burnt Exhaust Tip Carbon Fiber Stainless Steel Exhaust Muffler Tip Tail Pipe 2.5 to 4.5 inch 6.7 Long Bolt-on for Diesel Trucks Car

  • Design: Bolt On Or Weld as your like- Dry Carbon Fiber Sleeve - Angle Cut..
  • Material : Made of high quality stainless steel with Carbon Fiber Cover. Durable and Anti-corrosive,protect the original tips from Sun and Rain,avoid....
  • Wide Application: Universal fits 2.5" Inlet diesel trucks pickup car exhaust tail pipe..
  • Easy Installation: No weld and drill needed. Just fix the screw to the appropriate location of tailpipe by Wrench..
Check Stock

Weiler 10021 0.006

  • For light duty, general purpose applications.
  • Applicable for cleaning and finishing recessed areas of IDs.
  • cleaning and polishing die, mold and tool.
  • rust, paint, scale, slag and rubber/plastic flash removal.
  • Also used for Spot facing, deburring, weld, carbon and ID pipe cleaning.
Check Stock

HITBOX 4 in 1 Aluminum MIG Welder 200Amp 110V/220V Smart Control IGBT DC Inverter TIG Welder + MMA Stick Mix Gases Gasless Flux Solid Core Wire Welding Machine

  • 【ALL in ONE】 Smart welder for everyone. HITBOX 4 in 1 Function welder starts welding with a button! Choosing weld mode, material, weld wire,....
  • 【Multi-Material Weldable】HITBOX MIG200P inverter welder could weld aluminum, iron, carbon steel, stainless steel, etc. Applies to pipe....
  • 【MIG/MAG Welder】 1. MIXGAS can use 0.6 / 0.8 /0.9/ 1.0mm flux wire. With 0.6 / 0.8 / 1.0mm wire, it can be welded with a thickness of 0.6-3.4mm.....
  • 【TIG /WIG Welder】 Suitable for 1.6 mm and 2.4 mm tungsten. With 1.6 mm tungsten, it can be welded with a thickness of 1.0 to 4.8mm, and with 2.4....
  • 【MMA /ARC Welder】Current 40-170 amperes. 2.5 / 3.2 / 4.0mm electrodes can be welded. Welding thicknesses from 1.6 to 6.4 mm can be welded using....
Check Stock

uxcell Round Weld Nuts, M10 x 14mm x 13mm Weld On Bung Female Nut Threaded - 201 Stainless Steel Insert Weldable 4pcs

  • 【HIGH QUALITY】-All the weld nuts are made of high quality carbon steel, have high hardness, perfect wear and rust resistance, smooth surface without burr..
  • 【ADVANTAGE】-Flat solder joints, high-quality steel ,good weld ability, thread size accuracy..
  • 【SIMPLE TO USE】-First, clean the welding surface, using sandpaper or steel brush to remove the joint oxide.
  • Second, welding a little bit and adjust the verticality of the thread.
  • 【MULTI APPLICATION】-Used for pipe furniture, tables and chairs, shelves, vehicles, trolley casters and other threaded connection..
Check Stock

Sormor Matte Twill Carbon Fiber Muffler Pipes Exhaust Tips with Blue Burnt Stainless Steel Inlet 63mm 2.5inches Outlet 101mm 4inches

  • 1.Material: SUS 304 Stainless steel and high quality carbon fiber, corrosion resistance, rustproof, light weight and durable..
  • 2.Dimension: Inlet:63mm(2.5") ,Outlet:101mm(4") ,Total Length:165mm (6.5").
  • 3.Design: Bolt On - Dry Carbon Fiber Sleeve - Angle Cut..
  • 4.Installation: Easy clamps on installation. No weld and drill needed. Just fix the screw to the appropriate location of tailpipe by Wrench..
  • 5.Application: Fits for 2.4" outlet universal car original exhaust tail pipe..
Check Stock

SORMOR Red Twill Carbon Fiber Muffler Pipes Exhaust Tips with Mirror Polishing Stainless Steel, Inlet 63mm(2.5inches) Outlet 101mm(4inches)

  • 1.Material: SUS 304 Stainless steel and high quality carbon fiber, corrosion resistance, rustproof, light weight and durable..
  • 2.Dimension：Inlet:63mm(2.5") ,Outlet:101mm(4") ,Total Length:165mm (6.5").
  • 3.Design: Bolt On - Dry Carbon Fiber Sleeve - Angle Cut..
  • 4.Installation: Easy clamps on installation. No weld and drill needed. Just fix the screw to the appropriate location of tailpipe by Wrench..
  • 5.Application: Fits for 2.4" outlet universal car original exhaust tail pipe..
Check Stock

Oatey 30751 House Primers, 8 oz, Clear, 8 Fl Oz

  • Clear Primer, NSF listed (National Sanitation Foundation).
  • Clear aggressive primer used on PVC (polyvinyl chloride) and CPVC (chlorinated polyvinyl chloride) pipe and fittings.
  • Low VOC (volatile organic compound) solvent cement.
  • A clear aggressive primer for use on PVC and CPVC pipe and fittings.
  • Lo-V. O. C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
  • Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld.
  • Lo-V.O.C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
Check Stock

Sormor Red Twill Carbon Fiber Muffler Pipes Exhaust Tips with Mirror Polishing Stainless Steel, Inlet 63mm(2.5inches) Outlet 89mm(3.5inches)

  • 1.Material: SUS 304 Stainless steel and high quality carbon fiber, corrosion resistance, rustproof, light weight and durable..
  • 2.Dimension：Inlet 2.5"(63mm) Outlet 3.5"(89mm)” Total length 6.5”(165mm).
  • 3.Design: Bolt On - Dry Carbon Fiber Sleeve - Angle Cut..
  • 4.Installation: Easy clamps on installation. No weld and drill needed. Just fix the screw to the appropriate location of tailpipe by Wrench..
  • 5.Application: Fits for 2.4" outlet universal car original exhaust tail pipe..
Check Stock

Exhaust Turn Down Exhaust Tip 2.00' Diameter X 8.00' Long 1 7/8' Inlet Turn Down Chrome Plated WTD20008-175 Wesdon Exhaust Tip

  • 1 7/8 Inch Inlet 2.00 Inch Dia 8.00 In Long Turn Down Weld On Exhaust Tip.
  • Weld On Style fits a Exhaust Pipe 1 7/8 Inlet.
  • 2.00 Inch Diameter Pipe 8.00 Inches Long.
  • Turn Down Style Tip (Please measure to make sure it fits your Car or Truck) 1 7/8 ID Pipe.
Check Stock

2 Pcs M18x1.5 Thread Adapter, 304 Stainless Steel

  • 【Material】The mounting bung is made of stainless steel(Stainless Steel 304 for corrosive environments, rigid and durable body design), easy to weld on O2 sensor parts, exhaust, headers, down pipes, etc..
  • 【Installation】Install the weld bungs to replace or add sensor ports to any OEM or aftermarket exhaust or downpipe. Drill a hole and weld the mounting bung on..
  • 【Size】M18X1.5 thread adapter, confirm the product size before buying..
  • 【Parameter】Use for your custom sensor install, exhaust, down pipe, headers, exchangers and other installations where weld-in or weld-on metric connection is needed..
  • 【Package include】 2 PCS M18 Mounting Adapter. It comes with 1 year warranty. Any problems just contact us to resolve..
Check Stock

uxcell Weld Nuts,7/16-20 Tab Base Carbon Steel Machine Screw 4 Projection Silver 25Pcs

  • Application: Used for pipe furniture, tables and chairs, shelves, vehicles, trolley casters and other threaded connection..
  • Steps: First clean the welding surface, using sandpaper or steel brush to remove the joint oxide.Second welding a little bit and adjust the verticality of the thread .Finally solder all the solder joints..
  • Package Content: 25Pcs x Square Weld Nut.
  • Advantages: Flat solder joints, steel ,good weldability, thread size accuracy..
Check Stock

uxcell Weld Nuts,M8 Square UNC Coarse Carbon Steel Machine Screw Silver Pack of 20

  • Application: Used for pipe furniture, tables and chairs, shelves, vehicles, trolley casters and other threaded connection..
  • Steps: First clean the welding surface, using sandpaper or steel brush to remove the joint oxide.Second welding a little bit and adjust the verticality of the thread .Finally solder all the solder joints..
  • Package Content: 20 Pcs x Square Weld Nut.
  • Advantages: Flat solder joints, steel ,good weldability, thread size accuracy..
Check Stock

uxcell Weld Nuts,M6 Tab Base UNC Carbon Steel Machine Screw 2 Projection Silver 10Pcs

  • Application: Used for pipe furniture, tables and chairs, shelves, vehicles, trolley casters and other threaded connection..
  • Steps: First clean the welding surface, using sandpaper or steel brush to remove the joint oxide.Second welding a little bit and adjust the verticality of the thread .Finally solder all the solder joints..
  • Package Content: 10 Pcs x Square Weld Nut.
  • Advantages: Flat solder joints, steel ,good weldability, thread size accuracy..
Check Stock