Reviews Carbon Steel Wire Rods

KOOTANS 11 ft Fiberglass Wire Running Kit Wall Cable Wire Fishing Rod Pull Push Tool Electrical Fish Tape Set with 6 Different Accessories

  • FUNCTION --- Fiberglass fish tape cable rods kit apply to cable, wires, HDMI and network lines, other home wiring installation. It's great for running wire through walls, attics, conduits, crawl spaces, sub-floors, ceilings and car trim, etc..
  • MATERIAL --- Fiberglass, it's better than plated carbon steel. This fish tape has strong flexibility, rigidity and great insulation, but do not bend too much, otherwise it will break(Cannot be used on a 90 degree bend of small pipe). Low friction design allows the fish tape rod to easily glide through the conduit without stopping at turns, joints or couplings..
  • SIZE --- Single rod length: 1.1FT/0.33M, Diameter: 0.16inch/4mm (can work in narrow areas). Rods can be used individually or screwed together for required length, can be extended up to 11 feet, and together with 6 accessories, can be used in differing situations for pulling wire, snagging wire, etc..
  • HIGH VISIBILITY --- Electrical fish tape rods are colored with a bright yellow to be able to locate and differentiate the rods from wires easily. Also it is wear-resistant, corrosion-resistant and anti-oxidation, longer lifespan..
  • CONVENIENT STORAGE --- 10pieces 1.1FT fiberglass rods and 6 different accessories in one transparent plastic tube case with yellow si....
Check Stock

Heyiarbeit 2mm Carbon Fiber Rod Bar DIY Subject Support Poles for RC Airplane Matte Pole 400mm 15.75 Inch 10pcs

  • 【High Material】-This carbon brazing rod is made of carbon brazing, with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance, resistance to certain organic solvents, strong friction and high strength.
  • 【Features】- Light weight, high strength, lighter than aluminum, stronger than steel, are the salient features of carbon fiber rods, better than steel-plastic-wood, anti-aging, very durable, and long service life.
  • 【Advantages】- This carbon brazing rod is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments.
  • 【Application】- Carbon fiber rod are suitable for aviation model aircraft, model, multi-rotor support rods, model boats, racing, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, tents, bows, hatches, PCB equipment shafts, luggage, hand rods, as well as helicopters and R/C vehicle.
Check Stock

AZZUNO 200A MIG Welder,110V/220V Dual Voltage multiprocess welder,Gas Gasless MIG Welding Machine,4 in 1 Flux MIG/Solid Wire/Lift TIG/Stick ARC Welder (Grey)

  • 4 in 1 Welding Machine:This is a multifunctional welding machine,suitable for MMA, Lift TIG, flux MIG, gas MIG,4 welding modes for you to choose..
  • Synergic Control: Adjusting the amperage or choosing different wire thicknesses,the voltage and wire feeding speed will automatically change.Even a beginner can easily use it..
  • Gas/Gasless Welding: You can choose Flux Core Wire(Gasless) or Solid Wire(Gas). This Welder Can handle 2 lb and 10 lb rolls of wire 0.8mm~1.0mm Flux Core Wire/Solid Wire, MAX Welding Thickness 4.5mm..
  • Lift TIG/ARC Welding: Lift TIG available,TIG Torch fits WP17V, not included in the package.TIG Welding thickness 0.5MM-3MM, Suitable for thin work-pieces such as stainless steel, alloy steel, carbon steel etc.Arc Welding fits rods E7018, E6013..
  • Powerful And Safe Machine:This 200A Welding machine can weld mild up to 4.0mm plate,equipped with overload and overheating system,feel free to use,it’s very safe..
Check Stock

Heyiarbeit 1.5mm Carbon Fiber Rod Bar DIY Subject Support Poles for RC Airplane Matte Pole 200mm 7.87 Inch 5pcs

  • 【High Material】-This carbon brazing rod is made of carbon brazing, with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance, resistance to certain organic solvents, strong friction and high strength.
  • 【Features】- Light weight, high strength, lighter than aluminum, stronger than steel, are the salient features of carbon fiber rods, better than steel-plastic-wood, anti-aging, very durable, and long service life.
  • 【Advantages】- This carbon brazing rod is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments.
  • 【Application】- Carbon fiber rod are suitable for aviation model aircraft, model, multi-rotor support rods, model boats, racing, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, tents, bows, hatches, PCB equipment shafts, luggage, hand rods, as well as helicopters and R/C vehicle.
Check Stock

SmallRig 15mm Carbon Fiber Rod for 15mm Rod Support System (Non-Thread), 12 inches Long, Pack of 2 - 851

  • It is the new version of carbon fiber rod with the more smooth surface..
  • It fits 15mm rod clamp but its surface is not shiny anymore because we have redesigned it based on some customers' advice..
  • The carbon fiber rods are much lighter than stainless steel rods, but carbon fiber rods are incredibly rigid and durable..
  • Standard 15mm, can be used with 15mm rod clamp, follow focus, matte box, and so on..
  • Package includes: 2 x carbon fiber rod. Please note that the carbon fiber rods do not feature female thread.
Check Stock

Fasmov Swivel 3\ Universal Table Vise Tilts Rotate 360° Universal Work

  • The Table Vise will not deform even under high pressure, the vise is made of cast aluminum, the jaws are made of hardened high-carbon steel alloy, and the movable parts are made of precision milled heat-treated chromium plate carbon steel..
  • Jaws are 3" x 3/4" / 79mm x 17mm with a 2" / 51mm opening, the clip has a wide enough opening for any workbench or table..
  • Adjustable and rotates to any possible angle, rubber Jaws for no scratch and firm clamping, enabling you to lock the workpiece in any position..
  • Rubber on the jaws can be removed to reveal a cross pattern for use on wire/rods, The overall design of pliers has laid a good foundation for the smooth completion of your work..
  • Lightweight, small vise, easy operation, Ideal for holding small parts in Jewelry, Hobby, Model making, Electronics and more..
Check Stock

HZXVOGEN MIG Welder 100V/220V 200Amp Weld Aluminum Wider LCD Display Smart Control IGBT Inverter MIG Stick TIG Mix Gases Gasless Flux Cored Solid Core Wire Welding Machine Model HBM2280

  • THE MOST ADVANCED MULTIFUNCTIONAL WELDER - HZXVOGEN HBM2280 MIG welder with wider LCD displayed, it is a smart control welder. It is super easy and....
  • CAN WELD ALUMINUM - This welder can weld aluminum, iron, carbon steel, stainless steel, etc. This mig welder came with qualify accessories: MB24 Mig....
  • MIG FUNCTION - 1. MIX GAS can use 0.6/ 0.8/ 0.9/ 1.0mm flux wire. When using 0.6/ 0.8/ 0.9mm wire, it can weld 0.7 ~ 3.4mm thickness. When using 1.0mm....
  • TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten.When using 1.6mm tungsten can weld 0.7 ~ 4.8 thickness, using 2.4mm tungsten can weld 1.2 ~ 6.4mm....
  • MMA FUNCTION - Current 10 ~ 170 amp. Can weld 2.5/ 3.2/4.0mm electrode. Using 2.5/ 3.2mm rods, can weld 1.6 ~3.4mm thickness. Using 4.0mm rods, can....
Check Stock

Cadence Stout Spinning Reel and CR5 Spinning Rod

  • ...to prevent corrosion and ensure reel longevity. A strong aluminum braid-ready spool allows you to tie braid directly to the spool without backing..
  • Smooth Performance: The Stout spinning reel has a 7 + 1 sealed ball bearing system that is anti-corrosive and delivers maximum smoothness during retrieval..
  • Powerful: The carbon fiber drag system delivers a consistent and powerful drag and has a max drag of 41 pounds. A 6.2:1 gear ratio gives you cranking power but also allows you to keep up with fast running fish. The stainless-steel main shaft provides an enduring performance that you can rely on and is also corrosion resistant..
  • Ultra-High Quality 30-TON Carbon Fiber Blank: All CR5 1-piece and 2-piece fishing rods are constructed with 30-ton carbon matrix graphite blank offers strongest ,lightweight, durability and sensitivity than other rods. Ideal for game fish including freshwater fish like bass, walleye and trout as well as popular inshore species like red fish, speckled trout and flounder with a rinse after fishing..
  • Premium Materials: Cadence CR5 spinning rods are made from materials that bring strength and sensitivity without weight. Made of 30 ton carbon, SiC guides with durable stainless steel frames, a comfortable Fuji reel seat and a blank wrapp....
Check Stock

Rush Creek Creations 12 Fishing Rod Tackle Cart - 5 Minute Assembly, Black (40-0001)

  • Highly functional tackle storage cart that accommodates up to 12 fresh water rods.
  • Adjustable middle wire shelf and smooth rolling casters allow room for your favorite fishing gear.
  • Carbon fiber weave on base and top boards provide stability and durability.
  • Powder coated steel frame resists scratching.
Check Stock

Crescent 6 1/2\ Cee Tee Co.® Curved Jaw Combination Slip Joint Pliers - Carded - H26VN

  • Designed for gripping and turning round objects such as pipes, rods and pins.
  • Curved jaws combination with machined gripping teeth and wire cutter.
  • Forged from carbon steel and accurately machined, hardened and tempered.
Check Stock

Fielect 8mm Carbon Fiber Rod for RC Airplane Matte Pole Length 200mm 7.8 inch 2pcs

  • 【Features】- The carbon fiber rod has good heat resistance, corrosion, rubbing performance, high strength, stable and surface smoothness..
  • 【Advantages】- Carbon fiber bar is vert lightweight, lighter than aluminum, yet stronger than steel..
  • 【Application】- Carbon Fiber Rod are suitable for aviation model aircraft, model cars, multi-rotor support rods, model boats, racing cars, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, Tents, bows, hatches, PCB equipment shafts, luggage, hand rods..
  • 【Package Content】- 2Pcs x Carbon Fiber Rod..
Check Stock

Fielect 1.5mm Carbon Fiber Rod for RC Airplane Matte Pole Length 400mm 15.7 inch 10pcs

  • 【Features】- The carbon fiber rod has good heat resistance, corrosion, rubbing performance, high strength, stable and surface smoothness..
  • 【Advantages】- Carbon fiber bar is vert lightweight, lighter than aluminum, yet stronger than steel..
  • 【Application】- Carbon Fiber Rod are suitable for aviation model aircraft, model cars, multi-rotor support rods, model boats, racing cars, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, Tents, bows, hatches, PCB equipment shafts, luggage, hand rods..
  • 【Package Content】- 10Pcs x Carbon Fiber Rod..
Check Stock

LIVTE 12 Inch Heavy Duty Bolt Cutter, Hardened T8 Steel Bolt Lock Cutters with Soft Rubber Grip for Rebar Wires, Bolts, Steel Nails, Rivets and Chain Cutting

  • 【High-Carbon Steel Cutting Edge】Forged with high-quality high-carbon steel, the cutting edge treated with high-frequency quenching to achieve a fast and powerful cutting effect. Maximum cutting handle capacity：4mm diameter..
  • 【Alloy Steel Body】Built for tough cutting jobs, this 12 inch bolt cutter feature sturdy, hardened alloy steel jaws that are designed for maximum durability and cutting life..
  • 【Non-Slip Grips】The ergonomic threaded grips fit down over steel handles for improved strength and comfort, not easy to slip down..
  • 【Applications】The design of the lever principle for bolt cutters saves time and effort, ideal for cutting rods, bolts, soft metals, rivets, chains and fencing wire..
  • 【100% Money Back】For this 12 inch heavy duty bolt cutter, if any quality problems, please feel free to come, a replacement or a full refund will be assured..
Check Stock