Reviews Carbon Steel Taps
Drill America DWTPT1/4-1-1/4SET 6 Piece NPT Pipe Tap Set in Wooden Case (1/4\
- Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
- Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
- The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
- The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
- 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes /4.
Check StockMuzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit
- ...x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
- Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
- Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
- BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
- Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
- EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
- Each compartment is labeled with sizing for simple identification.
- PACKAGE CONTENTS: Combination set contains both metric taps and dies.
- Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
- (Thread pitch gauge not included, but we recommend using these taps to light up threads from the....
Check StockIrwin Tools Tap and Drill Sets, 13-Pieces
- This tap and drill bit set produces a thread that is strong and easy to tap.
- High-carbon steel plug taps are great for general-purpose threading.
- 135° split-point drill bits give fast, precise drilling.
- Set pieces: 6 – 32 NC, 8 – 32 NC, 10 – 24 NC, 10 – 32 NF, 12 – 24 NC and 1/4″ – 20 NC plug taps and 7/64″, 13/64″, #29, #25, #21 and #16 drill bits, plus a T-handle tap wrench.
Check StockMachine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap
- ...x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
- Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
- Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
- BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
- Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
- EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
- Each compartment is labeled with sizing for simple identification.
- PACKAGE CONTENTS: Combination set contains both metric taps and dies.
- Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
- (Thread pitch gauge not included, but we recommend using these taps to light up threads from the....
Check StockDrill America - POUCSNPT5 5 Piece NPT Pipe Tap Set (1/8\
- Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
- Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
- Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
- NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.
Check StockYG-1 - J0283 J0 Series Vanadium Alloy HSS Spiral Pointed Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, 8-32 Thread Size, H3 Tolerance
- Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
- Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
- Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
- NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.
Check StockDrill America DWTCS12X1.25S Carbon Steel Tap Set, M12 x 1.25
- Used to re-thread damaged and/or jammed threads.
- Carbon Steel Hand Taps may also be used to thread mild steels.
- Carbon steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole..
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Check StockDrill America DWTP5/8-18 5/8'-18 Carbon Steel Plug Tap (Pack of 1), DWT Series
- Used to re-thread damaged and/or jammed threads.
- Carbon Steel Hand Taps may also be used to thread mild steels.
- Carbon steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole..
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Check StockDrill America - DWTPT1/8-1SET 6 Piece NPT Pipe Tap, Carbon Steel, DWTPT Series Set, 1/8\
- Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
- Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
- The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
- The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
Check Stock1\ NPT Pipe Carbon Hex Rethreading Die
- ▲ EXCELLENT CUTTING PERFORMANCE - All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance.
- ▲ VERSATILITY AND TAPERED TEETH DESIGN - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.
- Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily.
- ▲ MOST POPULAR SIZES - Set includes (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
- (20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
- (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
- ▲ COMPREHENSIVE ACCESSORIES - Comes with (1) Adjustable Tap Handle.
Check StockNPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material
- ... pipe threads, look no further than our NPT Thread Forming Taps. This 5-piece set includes 1/8", 1/4", 3/8", 1/2", and 3/4" pipe taps, each made of high-speed steel material for durability and long-lasting use. Our taps are forged from composite steel (GCR15) material, hardened to a higher hardness (traditional 45# carbon steel hardness is 44.
- 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. It is used for the repair of rusted, broken and slippery threads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
- Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
- The thread is standard, clear, and the cutting resistance is smaller than that of ordinary taps, whic....
Check StockMuzerdo 131PCS Sae and Metric Coated Bearing Steel Tap and Die Rethreading Kit
- ...ded in the set are handles for turning. The collection also consists of screw extractors and charts to determine the correct drill and taps to match the thread size and pitch. Some sets may contain twist-lock guides, coarse and fine taps, and other tools at a higher cost..
- Instead of other kits which are made of low carbon steel, our kit are made of *** bearing steel*** which are more stronger, good abrasion performance. An overall chromium coating improves the corrosion resistance of the generally used through-hardening bearing steel. These cutting materials are suitable for threading steel, cast steel, cast iron, non-ferrous metals, plastics, softwood, and hardwood..
- Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.
Check StockOmninmo NPT Pipe Tap Set Thread Forming Taps High Speed Steel Drill Bits Thread Tap Attack Pipe Plate Hand Tapping for Cleaning or Re-thread Damaged or Jam Pipe Threads Size G3/4 55 Degrees
- High Strength Material: Omninmo pipe tap set is different from the traditional carbon steel material. Our pipe taps is made of composite steel material, which is more durable and Higher hardness..
- Professional Cutting Tools: Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
- Convenient and Durable: Uncoated tools feature just the base substrate without any additional treatment or coatings,Carbon steel pipe taps are designed to clean or rethread to damage or block pipe threads,cuts internal threads in pipes..
- Universal size: Nominal size of the tap is that of the pipe fitting being tapped. Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). The size is 3/4.Omninmo NPT Thread Forming Taps is ideal for pipe fittings..
- Product Guarantee: If you have any questions, Please contact us in time, We will reply to you immediately to solve your problem..
Check Stock