Reviews Carbon Steel Pipe Reducer
Brass Barb Reducer Fittings LIONMAX 1 to 3/4 Barb Hose ID Hose Barb Splicer Mender with 4 Hose Clamps for Air/Water/Fuel 2 PCS
- 【WITH HOSE CLAMPS】1'' to 3/4'' Hose barb reducer is suitable for connecting 1 inch ID hose to 3/4 inch ID hose. The package contains barb splicer reducer 2 PCS and 304 stainless steel hose clamp 4 PCS (size can adjust). You don't need to buy additional accessories..
- 【-65~250°F 150PSI】Brass barb reducer fitting has strong temperature resistance and good pressure resistance. So barb hose reducer is often used for water, fuel, oil delivery..
- 【SOLID BRASS MATERIAL】Barb splicer reducer is made of brass. Strong and durable, not easy to rust and corrode. Hose barb fitting has a long service life. NOTE: Brass barb reducer fitting is not suitable for potable water..
- 【WIDE APPLICATION】Barb hose reducer is suitable for pipe repair. Various hoses can be connected to this 1 inch to 3/4 inch ID hose barb fitting. Meet your multiple needs..
- 【TIGHT CONNECTION】This brass barb reducer is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed splicer reducer fitting not easy to leak during the connection process..
Check StockDERNORD Tri Clamp Bowl Reducer Sanitary Fitting Stainless Steel 304 (Tri Clamp Size: 4 inch x 2 inch)
- Bowl Reducer fitting to connect two pipes of different diameters that are along the same pipe axis.
- Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
- Stainless steel 304 for resistance to corrosion and high temperatures.
- Tri Clamp Bowl Reducer Ferrule Size 119MM fits 4" tri clamp.
- Tri Clamp Bowl Reducer Ferrule Size 64MM fits 2" tri clamp.
Check StockQMINOX 2 Inch × 1.5 Inch Sanitary Fitting End Cap Reducer Stainless Steel 304 Sanitary Concentric Reducer Tri Clamp Clover
- End Cap Reducer Ferrule Size 64mm = 2 Inch Tri Clamp.
- End Cap Reducer Ferrule Size 50.5mm = 1.5 Inch Tri Clamp.
- Concentric End Cap Reducer Fitting to Connect 2 Pipes of Different Diameters That are Along The Same Pipe Axis.
- Sanitary Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
- Stainless Steel 304 Sanitary Fitting for Resistance to Corrosion and High Temperatures.
Check StockKeenso Pocket Bike Sprocket, 13 Teeth Pinion Gear Motor Bicycle Chain Wheel 13T Freewheel Gear Motor Universal for Bicycle
- 【Durable Carbon Steel】--- This is a pocket bike sprocket, made of quality carbon steel, sturdy and durable for long use term.
- 【Specifications】--- Condition: 100% Brand New, Item Type: Pinion Gear, Material: Carbon Steel, 1016Z2 and Z3 reducer motor 13 tooth pinion, Number of teeth: 13, Teeth distance: 12.7 mm, Teeth Thickness: 3 mm, Inner diameter: 11 mm, Outer diameter: 58 mm, Thickness: 9 mm, Bolt width: 4mm (fixed tip key width), Applicable chain: ordinary bicycle chain (model 1/2x1/8), Applicable motor: 1016Z2, 1016Z3, 1018 reducer motor.
- 【Easy to install】--- Small size, lightweight. Very easy to install, and smooth performance. Suitable for ordinary bicycles.
- 【Size】--- The bicycle chain gear has 13 teeth, a pitch of 12.7 mm and a thickness of 3 mm.
- 【Service】--- We are here with a 100% product promise to give you the best customer support. Do not hesitate to contact us if you are not satisfied for any reason..
Check Stock5 Piece NPT Thread Forming Taps Pipe Taps Set High-speed Steel Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads Size 1/8 1/4 3/8 1/2 3/4 in Storage Box
- Durable materials: Upgrade Your Pipe Threading game with Our Composite Steel Pipe Taps Set. Ditch your old, carbon steel pipe taps and upgrade to our composite steel (GCR15) pipe taps set. With a higher hardness level than traditional carbon steel, our pipe taps are more durable and long-lasting..
- Tool Storage Box: The 5-piece set includes all the sizes you need for clean and re-threading damaged or jam pipe threads, and the Storage Box makes for easy organization and transport. Includes size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt.
- Versatile set suitable for both personal and professional use. Clean and Re-Thread Damaged or Jam Pipe Threads with Ease - Ideal for Pipe Fittings, DIYers, handymen, and professionals who need to repair damaged pipe threads. Revive Damaged Pipe Threads with Precision Using Our 5-Piece High-Speed Steel NPT Pipe Taps Set..
- NPT and BSP Available - Perfect for Cuts Internal Threads in Pipes. Durable and Harder Than Carbon Steel - Our GCR15 Material Makes All the Difference. With a round shank and square end, our pipe taps are well-suited for most applications in shallow cuts. Upgrade your pipe threading game today with our composite steel pipe taps set..
- Uncoated Tools for Versatile Use: Unco....
Check StockCarbon Fiber Exhaust Tip 3 Inch Inlet 4 Inch Outlet Burnt Blue 3 Inch Exhaust Tips Muffler Tip
- 【Purchase Guide】 Remove the exhaust tip from the original car and make sure the outer diameter of the exhaust pipe is 3 inch(77mm)..
- 【Universal fitment】The muffler exhaust end tip fits for most vehicles with a pipe diameter of 3.0 inch..
- 【High quality steel】 The 3 inch exhaust tip is designed with durable SUS304 stainless steel . Protect your original pipe from sun and rain. Avoid rusting and deformation..
- 【3K Carbon Fiber】 The shell of the 3 inlet carbon fiber exhaust tip is made with carbon fiber material, smooth and shiny, and resistant to high temperatures.Also can decorate the car, increase the beauty of the car, enhance the driving experience..
- 【Easy installation】 No welding and drilling required. just put the carbon fiber tail pipe on the car exhaust pipe and tighten the fixing device..
Check StockDrill America DWTPT1/4-1-1/4SET 6 Piece NPT Pipe Tap Set in Wooden Case (1/4\
- Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
- Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
- The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
- The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
- 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes /4.
Check StockCarbon Fiber Exhaust Tip 3 Inlet 4 Outlet Red Exhaust Tip 3 inch Car Tailpipe Muffler Tip for 3in Exhaust Pipe
- 【Universal fitment】The muffler exhaust end tip fits for most vehicles with a pipe diameter of 3 inch.
- 【High quality steel】 The 3 inch exhaust tip is designed with durable SUS304 stainless steel . Protect your original pipe from sun and rain. Avoid....
- 【3K Carbon Fiber】 The shell of the 3 inlet carbon fiber exhaust tip is made with carbon fiber material, smooth and shiny, and resistant to high....
- 【Easy installation】 No welding and drilling required. just put the carbon fiber tail pipe on the car exhaust pipe and tighten the fixing device..
- 【Warranty】 Tempsnow provide 30-Days warranty. If you have any problems with it or questions, please contact us and we will respond in time. We're....
Check Stockuxcell Spiral Point Plug Threading Tap M8 x 1.25 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End
- Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44.
- the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads..
- 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt..
- Nominal size of the tap is that of the pipe fitting being tapped..
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications..
- Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
Check StockDrill America - POUCSNPT5 5 Piece NPT Pipe Tap Set (1/8\
- Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
- Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
- Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
- NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.
Check StockDrill America - POU3/8NPTW/DRILL 3/8\ Carbon Steel NPT Pipe Tap and 37/64\ High Speed Steel Drill Bit Set, POU Series
- Carbon steel pipe taps are designed to clean and or re-thread damaged or Jam pipe threads.
- Black oxide drill bit is ideal for production, maintenance or portable drilling jobs.
- 3/8" carbon steel NPT tap and 37/64" HSS drill bit with 1/2" Shank.
- Set contains matching NPT pipe tap and high speed steel drill bit.
Check StockOmninmo NPT Pipe Tap Set Thread Forming Taps High Speed Steel Drill Bits Thread Tap Attack Pipe Plate Hand Tapping for Cleaning or Re-thread Damaged or Jam Pipe Threads Size G3/4 55 Degrees
- High Strength Material: Omninmo pipe tap set is different from the traditional carbon steel material. Our pipe taps is made of composite steel material, which is more durable and Higher hardness..
- Professional Cutting Tools: Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
- Convenient and Durable: Uncoated tools feature just the base substrate without any additional treatment or coatings,Carbon steel pipe taps are designed to clean or rethread to damage or block pipe threads,cuts internal threads in pipes..
- Universal size: Nominal size of the tap is that of the pipe fitting being tapped. Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). The size is 3/4.Omninmo NPT Thread Forming Taps is ideal for pipe fittings..
- Product Guarantee: If you have any questions, Please contact us in time, We will reply to you immediately to solve your problem..
Check StockZurn GT2700-10-2NH - Steel Grease Trap, 10 GPM 2\ with Flow Control
- ...e interceptor, whose flow rate is about 35 GPM (132.49 LPM). The interior space is divided into three different filter areas. The solid waste and grease will be stopped by the filter baffle firstly, and then the oil and filtered water will be discharged from the outlet valve and drainage outlet successively..
- Coated Carbon Steel: Our 70 LB commercial grease trap is made of heavy-duty carbon steel, around 0.07 in (1.8 mm) in thickness, featuring durability and sturdiness. There is a rust & corrosion-proof coating on its exterior surface, which is easy to clean and hard to deform..
- Reliable Sealing Effect: As a piece of rugged equipment for collecting and filtering the waste in the kitchen, this commercial grease interceptor spotlights the excellent sealing effect. The lid can be tightly fixed with a screw. The cushion layer is equipped for increasing friction and enhancing airtightness. Besides, a sealing ring and PTFE tape are also included in the package..
- Ease Of Connecting:You can connect our commercial grease trap to your kitchen sink conveniently. Just link the grease inlet pipe to the higher inlet hole and the water outlet pipe to the lower outlet hole, then it will work properly. A piece of connecting pipe is provided, with which you can place ....
Check Stock