Categories

Reviews Carbon Steel Open End

Utoolmart Flare Nut Wrench, 8mm x 10mm Metric Double Open End, 1Pcs

【DOUBLE OPEN END】- 8mm x 10mm / 0.31 x 0.39-inch..
【MATERIAL】- Flare Nut Wrench is made of high carbon steel for strength and durability..
【SURFACE TREATMENT】- Fully Polished and Chrome Coated support best Anti-Rusting Surface..
【OFFSET END】- 15 degree offset open end allows an increased range of arc swing in tight spaces..
【Widely Use】- Double Open End Nut Wrench is Applied in DIY hand-making, automotive repairs, household maintenance, and most general repairs..

Check Stock

uxcell Thin Open End Wrench, 18mm x 19mm Metric Mirror-Chrome Plated High Carbon Steel

【Standard】18mm x 19mm metric sizes, 6.69-inch (170mm) total length..
【Super-Thin】3mm (0.12") thickness design, which allows you to reach fasteners in tight clearance. It is especially suitable for narrow spots that traditional wrenches can’t reach..
【High Carbon Steel】Made of high carbon steel for strength and durability, with polished and chrome plated finish to prevent rust and corrosion..
【Open End】Angled at 15-degree on each end allows an increased range of arc swings in narrow spaces. Two sizes per wrench make it more versatile..
【Size Marking】Size stamped on both ends of the handle for quick identification..

Check Stock

uxcell Thin Open End Wrench, 24mm x 27mm Metric Mirror-Chrome Plated High Carbon Steel

【Standard】24mm x 27mm metric sizes, 8.74-inch (222mm) total length..
【Super-Thin】3mm (0.12") thickness design, which allows you to reach fasteners in tight clearance. It is especially suitable for narrow spots that traditional wrenches can’t reach..
【High Carbon Steel】Made of high carbon steel for strength and durability, with polished and chrome plated finish to prevent rust and corrosion..
【Open End】Angled at 15-degree on each end allows an increased range of arc swings in narrow spaces. Two sizes per wrench make it more versatile..
【Size Marking】Size stamped on both ends of the handle for quick identification..

Check Stock

uxcell Thin Open End Wrench, 14mm x 15mm Metric Mirror-Chrome Plated High Carbon Steel, 2 Pcs

【Standard】14mm x 15mm metric sizes, 5.55-inch (141mm) total length..
【Super-Thin】3mm (0.12") thickness design, which allows you to reach fasteners in tight clearance. It is especially suitable for narrow spots that traditional wrenches can’t reach..
【High Carbon Steel】Made of high carbon steel for strength and durability, with polished and chrome plated finish to prevent rust and corrosion..
【Open End】Angled at 15-degree on each end allows an increased range of arc swings in narrow spaces. Two sizes per wrench make it more versatile..
【Size Marking】Size stamped on both ends of the handle for quick identification..

Check Stock

uxcell Thin Open End Wrench, 12mm x 13mm Metric Mirror-Chrome Plated High Carbon Steel, 2 Pcs

【Standard】12mm x 13mm metric sizes, 5.39-inch (137mm) total length..
【Super-Thin】3mm (0.12") thickness design, which allows you to reach fasteners in tight clearance. It is especially suitable for narrow spots that traditional wrenches can’t reach..
【High Carbon Steel】Made of high carbon steel for strength and durability, with polished and chrome plated finish to prevent rust and corrosion..
【Open End】Angled at 15-degree on each end allows an increased range of arc swings in narrow spaces. Two sizes per wrench make it more versatile..
【Size Marking】Size stamped on both ends of the handle for quick identification..

Check Stock

Auniwaig 27mm x 30mm Double Open End Wrench 45# Carbon Steel Wrench Repairs Tool Metric Wrench Chrome Plated 265mm Length 1PCS

【Advantage】- Per wrench has two size which gives more options with less to carry.
With one being slightly bigger than the other, giving you greater access to the hard to reach areas.
【Application】- Applied in DIY hand-making, automotive repairs, household maintenance, and most general repairs.
【Material】- Double open end wrench is made of heat treated 45# carbon steel for strength and long-lasting durability.
Last for long-term daily use. Chrome plating finished for a smooth surface, long lasting protection and resist corrosion.
【Special Design】- A dual open-end design makes it easy to add these wrenches as a go-to set in your toolbox, perfect for calliper jobs!.
【Dimension】- The total length of the double open end wrench is 265mm/10.43-inch.
the open end wrench size is 27mm x 30mm / 1.06-inch x 1.18-inch.

Check Stock

Utoolmart Double Open End Wrench, 157mm Length Metric Wrench, 13mm x 15mm Wrench Repairs Tool, 45# Carbon Steel, Chrome Plated, 1 Pcs

【Dimension】- The total length of the double open end wrench is 157mm / 6.18-inch.
the open end wrench size is 13mm x 15mm / 0.51-inch x 0.59-inch..
【Material】- Double open end wrench is made of heat treated 45# carbon steel for strength and long-lasting durability. Last for long-term daily use. Chrome plating finished for a smooth surface, long lasting protection and resist corrosion..
【Special Design】- A dual open-end design makes it easy to add these wrenches as a go-to set in your toolbox, perfect for calliper jobs!.
【Advantage】- Per wrench has two size which gives more options with less to carry. With one being slightly bigger than the other, giving you greater access to the hard to reach areas..
【Application】- Applied in DIY hand-making, automotive repairs, household maintenance, and most general repairs..

Check Stock

uxcell Combination Wrench with Offset Box End and Angled Open End, Metric Mirror-Chrome Plated High Carbon Steel, 13mm

[Metric Sizes] - 13mm, 7.8-inch (198mm) total length..
[High Carbon Steel] - Made of high carbon steel for strength and durability, with mirror chrome plated finish to prevent rust and corrosion..
[12-Point Box End] - Doubles the access angles of a 6-point and offset it by 15 degrees to leave space for fingers, prevent round-off and apply force to the flat sides of fastener heads instead of the corners..
[OPEN END] - It is angled 15 degrees, so the wrench can be flipped over to engage fasteners twice as often in narrow spaces..
[Size Marking] - Size stamped on both ends of the handle for quick identification..

Check Stock

Pittsburgh 11 Piece Metric Fully Polished Long Handle Combination Wrench Set

Constructed from chrome plated high carbon steel.

Check Stock

uxcell Thin Combination Wrench with Offset 6-Point End and Angled Open End, Metric Mirror-Chrome Plated High Carbon Steel, 17mm

【Standard】17mm metric sizes, 7.6-inch (193mm) total length..
【Super-Thin】3mm (0.12") thickness design, which allows you to reach fasteners in tight clearance. It is especially suitable for narrow spots that traditional wrenches can’t reach..
【High Carbon Steel】Made of high carbon steel for strength and durability, with polished and chrome plated finish to prevent rust and corrosion..
【6-Point Box End Design】For secure fit on hex fasteners, offset by 15 degrees to leave space for fingers, prevent round-off and apply force to the flat sides of fastener heads instead of the corners..
【Open End】It is angled 15 degrees, so the wrench can be flipped over to engage fasteners twice as often in narrow spaces..

Check Stock

uxcell Thin Combination Wrench with Offset 6-Point End and Angled Open End, Metric Mirror-Chrome Plated High Carbon Steel, 8mm

【Standard】8mm metric sizes, 4.06-inch (103mm) total length..
【Super-Thin】3mm (0.12") thickness design, which allows you to reach fasteners in tight clearance. It is especially suitable for narrow spots that traditional wrenches can’t reach..
【High Carbon Steel】Made of high carbon steel for strength and durability, with polished and chrome plated finish to prevent rust and corrosion..
【6-Point Box End Design】For secure fit on hex fasteners, offset by 15 degrees to leave space for fingers, prevent round-off and apply force to the flat sides of fastener heads instead of the corners..
【Open End】It is angled 15 degrees, so the wrench can be flipped over to engage fasteners twice as often in narrow spaces..

Check Stock

uxcell Thin Combination Wrench with Offset 6-Point End and Angled Open End, Metric Mirror-Chrome Plated High Carbon Steel, 10mm

【Standard】10mm metric sizes, 4.84-inch (123mm) total length..
【Super-Thin】3mm (0.12") thickness design, which allows you to reach fasteners in tight clearance. It is especially suitable for narrow spots that traditional wrenches can’t reach..
【High Carbon Steel】Made of high carbon steel for strength and durability, with polished and chrome plated finish to prevent rust and corrosion..
【6-Point Box End Design】For secure fit on hex fasteners, offset by 15 degrees to leave space for fingers, prevent round-off and apply force to the flat sides of fastener heads instead of the corners..
【Open End】It is angled 15 degrees, so the wrench can be flipped over to engage fasteners twice as often in narrow spaces..

Check Stock

uxcell Thin Combination Wrench with Offset 6-Point End and Angled Open End, Metric Mirror-Chrome Plated High Carbon Steel, 5mm, 2 Pcs

【Standard】5mm metric sizes, 3.03-inch (77mm) total length..
【Super-Thin】3mm (0.12") thickness design, which allows you to reach fasteners in tight clearance. It is especially suitable for narrow spots that traditional wrenches can’t reach..
【High Carbon Steel】Made of high carbon steel for strength and durability, with polished and chrome plated finish to prevent rust and corrosion..
【6-Point Box End Design】For secure fit on hex fasteners, offset by 15 degrees to leave space for fingers, prevent round-off and apply force to the flat sides of fastener heads instead of the corners..
【Open End】It is angled 15 degrees, so the wrench can be flipped over to engage fasteners twice as often in narrow spaces..

Check Stock