Reviews Carbon Steel Forging Rods

MITSUMOTO SAKARI 10 inch Knife Sharpening Steel Honing Rod Japanese High Carbon Flat Honing Steel Professional Kitchen Steel Knife Sharpener ABS Handle & Powerful Magnet

  • [High Quality Carbon Steel] Professional sharpening steel rods are made of high carbon steel and diamond plating with hardness up to 80 HRC.
  • [Sophisticated Shape Design] The 10" sharpening rod length is ideal for most size knives.
  • the sword-like design is lightweight and portable without....
  • [Professional Knife Sharpening Rod] The high-carbon steel honing rod is very easy to use.
  • place the heel of the blade on the top of the sharpening rod....
  • [Daily Maintenance Instructions] Although it is not necessary to wash the honed steel knife rod after each use of the sharpener, it is recommended....
  • [STRICT QUALITY AUDIT] ミツモトサカリ knives are strictly audited for quality certification and forging. If you have any questions and queries....
Check Stock

MITSUMOTO SAKARI 10 inch Knife Sharpening Steel Honing Rod Japanese High Carbon Round Honing Steel Professional Kitchen Steel Knife Sharpener ABS Handle & Powerful Magnet

  • [High Quality Carbon Steel] Professional sharpening steel rods are made of high carbon steel and diamond plating with hardness up to 80 HRC.
  • [Sophisticated Shape Design] The 10" sharpening rod length is ideal for most size knives.
  • the sword-like design is lightweight and portable without....
  • [Professional Knife Sharpening Rod] The high-carbon steel honing rod is very easy to use.
  • place the heel of the blade on the top of the sharpening rod....
  • [Daily Maintenance Instructions] Although it is not necessary to wash the honed steel knife rod after each use of the sharpener, it is recommended....
  • [STRICT QUALITY AUDIT] ミツモトサカリ knives are strictly audited for quality certification and forging. If you have any questions and queries....
Check Stock

TEKTON Cold Chisel Set, 3-Piece (1/4, 3/8, 1/2 in.) | PNC91002

  • Includes 3-pc. cold chisels: 1/4, 3/8, 1/2 in..
  • Cuts bolts, rods, and rivets, cleans off waste and slag, and shapes cast iron, steel, brass, bronze, copper, and aluminum.
  • Forged and machined from premium, high carbon steel.
  • Rough ground after forging, a second sharpening after heat treating produces a high-performance cutting edge.
  • Individual heat treatment allows the right balance of a hardened edge with a softer striking end.
Check Stock

TEKTON Long Cold Chisel Set 3-Piece 1/2 3/4 1 in | 66506

  • Cuts bolts, rods, and rivets, cleans off waste and slag, and shapes cast iron, steel, brass, bronze, copper, and aluminum.
  • Forged and machined from premium high-carbon steel.
  • Rough ground after forging, a second sharpening after heat treating produces a high-performance cutting edge.
  • Individual heat treatment allows the right balance of a hardened edge with a softer striking end.
  • Classic natural finish has a dry-touch rust-preventative coating.
Check Stock

8 inches Long Hand Forged Damascus Steel Blank Blade Skinning Knife with 3 Pin Hole & an Inserting Hole Space 4 inches Cutting Edge

  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
  • Overall 8 inches Long hand forged full tang Damascus steel blank blade.
  • 4 inches long cutting edge. Up to standard skinning and Hunting Knife.
  • 4" long Scale space with 3 Pin and an inserting holes for extra strength of scale..
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check Stock

AULAKNIV Collect Customized Full Tang Fixed Blade D2 Steel Perfect Tactical Design 12.5" Bowie Knives Tactical,Hunting,Survival,Camping Tools W/Leather Sheath

  • Overall 11 inches Long hand forged full tang twist pattern Damascus steel blank blade.
  • 6 inches long cutting edge. Up to standard of Kukri point blade skinning Knife.
  • 4.75" long finger serrated Scale space with finger guard.
  • Approximately 5 mm Thick twist pattern Damascus steel Kukri point blade. Our Damascus steel is prepared by forging over 200 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

Whole Earth Supply Extra Large - Raindrop Damascus Tracker Blank Blade Knives Knife Making Blanks

  • Overall 11 inches Long hand forged full tang Damascus steel tracker knife blank blade.
  • 6 inches long cutting edge. Up to standard Tracker and camping Knife blank blade.
  • 4.5" long Scale space with 3 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick fire pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low....
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

10.75 inches long Kukri point Blank blade, hand forged Ladder pattern Damascus steel hunting knife blade, knife making supplies, 3 Pin hole scale, 6" sharp cutting edge

  • Overall 10.75 inches Long hand forged full tang Ladder pattern Damascus steel blank blade.
  • 6 inches long cutting edge. Up to standard of Kukri point blade skinning Knife.
  • 4.5" long Scale space with 3 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick Ladder pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

11 inches Long Kukri Point Dao Blank Blade, Hand Forged Twist Pattern Damascus Steel Hunting Knife Blade, 5" Finger Serrated Space with Finger Guard, 6" Sharp Cutting Edge

  • Overall 11 inches Long hand forged full tang twist pattern Damascus steel blank blade.
  • 6 inches long cutting edge. Up to standard of Kukri point blade skinning Knife.
  • 4.75" long finger serrated Scale space with finger guard.
  • Approximately 5 mm Thick twist pattern Damascus steel Kukri point blade. Our Damascus steel is prepared by forging over 200 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

11 inches long Damascus steel tracker knife blank blade, hand forged Ladder pattern Damascus steel tracker knife, Camping knife with 4 Pin hole, 6 inches cutting edge, 4.5' scale space

  • Overall 10.75 inches Long hand forged full tang Damascus steel tracker knife blank blade.
  • 5.5 inches long cutting edge. Up to standard Tracker and camping Knife blank blade.
  • 4.5" long Scale space with 4 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick Ladder pattern Damascus steel Tracker blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

10 inches Long Damascus Steel Nessmuk Blade Skinning Knife, Knife Making Supplies, Hand Forged rain Drop Pattern Damascus Steel Blank Blade Hunting Knife, 5.25" Cutting Edge, 4.5" Scale Space

  • Overall 10 inches Long hand forged full tang Damascus steel blank blade.
  • 5.25 inches long cutting edge. Up to standard Nessmuk skinning and Hunting Knife blank blade.
  • 4.5" long Scale space with 3 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick rain drop pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

15" Long hand forged Damascus steel Hunting Bowie Knife, 2 tone Black Dollar wood with Brass finger guard, Cow Hide Leather sheath with belt loop

  • Overall 15" Long Bowie knife. 9.5" long blade Hand forged Damascus steel blade with 9 Inches cutting edge..
  • 5.5" long Black 2 tone Dollar wood with Brass spacer, Pommel and finger guard round scale.
  • Approximately 5 mm Thick Ladder pattern Damascus steel. Up to standard hunting Bowie Knife.
  • Comes with a fine quality extra thick and robust leather sheath. The sheath has belt inserting loop and can be worn on belt..
  • Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC.
Check Stock

9 inches Long Blank Blade, Hand Forged rain Drop Pattern Damascus Steel Skinning Knife Blade, Knife Making Supplies, Drop Point Blade Pocket Knife with 3 Pin Hole, 4.5" Cutting Edge, 4.5" Scale Space

  • Overall 9 inches Long hand forged full tang rain drop pattern Damascus steel blank blade.
  • 4.5 inches long cutting edge. Up to standard Pocket skinning and compact Knife.
  • 4.5" long Scale space with 3 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick rain drop pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock