Reviews Carbon Steel Bolt

LIVTE 12 Inch Heavy Duty Bolt Cutter, Hardened T8 Steel Bolt Lock Cutters with Soft Rubber Grip for Rebar Wires, Bolts, Steel Nails, Rivets and Chain Cutting

  • 【High-Carbon Steel Cutting Edge】Forged with high-quality high-carbon steel, the cutting edge treated with high-frequency quenching to achieve a fast and powerful cutting effect. Maximum cutting handle capacity：4mm diameter..
  • 【Alloy Steel Body】Built for tough cutting jobs, this 12 inch bolt cutter feature sturdy, hardened alloy steel jaws that are designed for maximum durability and cutting life..
  • 【Non-Slip Grips】The ergonomic threaded grips fit down over steel handles for improved strength and comfort, not easy to slip down..
  • 【Applications】The design of the lever principle for bolt cutters saves time and effort, ideal for cutting rods, bolts, soft metals, rivets, chains and fencing wire..
  • 【100% Money Back】For this 12 inch heavy duty bolt cutter, if any quality problems, please feel free to come, a replacement or a full refund will be assured..
Check Stock

LIVTE 2-Pack 14 Inch Heavy Duty Bolt Cutter, Hardened T8 Steel Bolt Lock Cutters with Soft Rubber Grip for Rebar Wires, Bolts, Steel Nails, Rivets and Chain Cutting,Yellow

  • 【High-Carbon Steel Cutting Edge】Forged with high-quality high-carbon steel, the cutting edge treated with high-frequency quenching to achieve a fast and powerful cutting effect. Maximum opening: 13mm. Maximum cutting handle capacity：5mm diameter..
  • 【Alloy Steel Body】Built for tough cutting jobs, these bolt cutters feature sturdy, hardened alloy steel jaws that are designed for maximum durability and cutting life..
  • 【Non-Slip Grips】The ergonomic threaded grips fit down over steel handles for improved strength and comfort, not easy to slip down..
  • 【Applications】The design of the lever principle for bolt cutters saves time and effort, ideal for cutting rods, bolts, soft metals, rivets, chains and fencing wire..
  • 【100% Money Back】For these 2 pack of heavy duty bolt cutters, if any quality problems, please feel free to come, a replacement or a full refund will be assured..
Check Stock

Wheel Accessories Parts 14x1.25 Chrome - Cone Seat - Premium Lug Bolt Wheel Lock Set (24mm Long) (Set of 4 + Key) (14x1.25, Chrome)

  • 4 Lug Bolt Locks with M14x1.25 Thread, Shank length (thread length): 24mm, 1 dual hex key included (13/16" & 3/4").
  • Lug Bolts can be commonly found in applications of many European cars where the vehicles have been designed to use Lug Bolts instead of more commonly used Studs and Lug Nuts..
  • Chrome plated lug bolts have a long lasting, high luster finish. Every lug bolt is double nickel plated to surpass 48 hour salt spray testing..
  • Our lug bolts are forged, not cut from bar stock. Forging allows for better mechanical properties and consistent quality. Our threads are rolled (forged) onto the bolt, not cut like most of our competitors..
  • Our Lug Bolts are made of Carbon Steel and Heat Treated to 10.9 grade. Carbon Steel is an alloy known for its very good form-ability, comparatively high strength, and a very good surface finish.
Check Stock

BASTION Carbon Fiber Bolt Action Pen with Gift Case - Luxury Stainless Steel Core Executive Retractable Metal - Ink Refillable EDC Office Business Pocket Ballpoint for Men & Women

  • Carbon Fiber Sleek Body: The outer body is made of 100% genuine carbon fiber and the core barrel is constructed of real stainless steel resulting in a lightweight, ultra-durable, and aesthetically pleasing pen. Stronger than steel, the carbon fiber outer body ensures an indestructible barrel giving you a pen that lasts a lifetime..
  • CARBON FIBER OUTER BODY, 100% STAINLESS STEEL PEN | EDC EMERGENCY SELF-DEFENSE TOOL, GLASS BREAKER: We offer a proprietary pen featuring solid carbon fiber tube over a stainless core tube. Carbon fiber is rarely used in pens due to its high cost and manufacturing complexity. Made of 100% genuine stainless steel. A very convenient self-defense tool you can take anywhere without intimidating anybody..
  • Bolt Action Mechanism: BASTION pens are a status symbol for their superior construction that combine functionality and elegance through its machined CNC precision design. Our bolt-action technology offers a secure lock with no wearing components, as well as a smooth one-push operation. The lightweight pen writes smoothly and glides across the page effortlessly perfect for everyday use..
Check Stock

Breeze TB800 Standard T-Bolt Clamp Effective Diameter Range 8 - 8.31 203.2mm - 211.1mm

  • 3/4" (19mm) wide, 300 Series Stainless Steel Band.
  • Plated Carbon Steel Bolt, High Strength, One-Piece Stainless Steel Trunnion.
  • Meets or exceeds SAE Spec. J1508 for T-Bolt clamps.
  • Superior welded construction, Floating bridge liner.
  • Reliable, heavy duty method of assembling hose ducting connections and tubing..
Check Stock

LEM 1383 #32 Aluminum Hand Grinder

  • Cast aluminum bolt down hand grinder made to withstand many grinds.
  • Includes 2 carbon steel grinding plates: 3/8" and 3/16".
Check Stock

Stainless Steel Knife Blade Replacement for Meat Grinder (TWO Blades) (#32)

  • Cast aluminum bolt down hand grinder made to withstand many grinds.
  • Includes 2 carbon steel grinding plates: 3/8" and 3/16".
Check Stock

LEM 1384 #10 Aluminum Hand Grinder

  • Cast aluminum bolt down hand grinder made to withstand many grinds.
  • Includes 1 each: carbon steel coarse and fine grinding plates.
Check Stock

Titan Attachments 24in Wide Backhoe Bucket, 4-Carbon Steel Teeth, Hydraulic Tilt Backhoe & Excavator Attachment

  • DESIGNED FOR THE TITAN BHBUCKET10, BHBUCKET12, BHBUCKET14, BHBUCKET16: This 3Piece Replacement Tooth Kit is a direct replacement for Titan Attachments 10, 12, 14, and 16inch Backhoe Buckets that will fit a Fronthoe and LW Series Backhoe. Titan recommends checking your buckets hole spacing before purchase. The mounting bolt spacing is 2inches..
  • REPLACEABLE TEETH: With just a little help from your toolbox, remove old or broken teeth and replace them with new ones..
  • FORGED CARBON STEEL: The teeth are forged from extradurable carbon steel and powdercoated black for a longerlasting finish..
  • DIMENSIONS: The replacement teeth are 7.48inches long, 1.7inches wide, and 1.4inches thick. Each tooth has two holes to fit a M12x55 mounting bolt with 2inch spacing..
Check Stock

MAXPOWER Bolt Cutter 24 inch, Chrome Molybdenum Steel Blade Heavy Duty Bolt Cutter

  • 24 inch Bolt cutter, opening capacity 7/8 inch (22mm), Overall length 600mm.
  • Cutting capacity: Up to 3/8 inch (10mm) for carbon steel, 5/16 inch (8mm) for alloy steel, blade hardness HRC58-60.
  • Drop forged Cr-Mo steel jaws, hardened and heat-treated for durability.
  • Precise blade alignment, built-in adjustment bolt provides greater power with less effort.
  • Ergonomic non-slip rubber handle for a comfortable grip and provide more leverage.
Check Stock

Auto Body Now ABN Harmonic Balancer Puller 46-Piece Tool Kit – Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set

  • ..., and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
  • Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
  • [Built to Last] Heat-treated carbon steel ensures maximum strength.
  • Chrome and black oxide finishes resist rust and corrosion.
  • Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
  • [Package Contents] Crank pulley puller tool wheel balancer gear puller set include (1) 5 inch long 3/4-inch pressure screw, (30) bolts, (1) steel yoke, (2) centering adapters, (1) flat shaft adapter, (11) different sized washers, and (1) carrying case for your convenience.
Check Stock

ATPEAM 46pcs Harmonic Balancer Puller Set | Steering Wheel Puller Kit, Use with Harmonic Balancers, Crankshaft Pulleys and Gears, Work on Most Cars, Pickups, SUVs

  • Extra Last: The Steering Wheel Puller Kit is made of heat-treated carbon steel ensures maximum strength.
  • Chrome and black oxide finishes resist rust and corrosion.
  • Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
  • Mutiple Use: The harmonic balancer puller includes 30 different bolts&a four yoke slot, allowing unit to be used with harmonic balancer, Flywheel, Crankshaft, Steering Wheel ,Pulley and other two or three-hole applications..
  • Various Bolt Sizes Added: 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
  • Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
  • Wide Compatibility: The ATPEAM crankshaft pulley puller features a steel yoke with four slots enabling use on nearly any vehicle configuration..
  • The Wheel Balancer Gear Puller Set Includes: (1) 5 inch long 3/4-inch pressure screw, (30) bolts, (1) steel yoke, (2) centering adapters, (1) flat shaft adapter, (11) different sized washers, and (1) carrying case for your convenience.
Check Stock

Craft&Ride Bolt-On Carbon Fiber Fender for Onewheel+ XR, Onewheel+, and Original Onewheel

  • Please note: This product is not the Onewheel electric skateboard. This is a fender for the Onewheel electric skateboard..
  • FUNCTION: The Craft&Ride Bolt-On Carbon Fiber Fender is one of the most important accessories for your Onewheel because it protects you and the surface of your Onewheel from water and debris that may be projected upward by your tire. Not only will you never have to worry about getting your shoes and pants dirty ever again, but you will also remain safe from injuries caused by debris propelled upward by your tire. You receive full wheel coverage with the Craft&Ride Bolt-On Carbon Fiber Fender..
  • DURABILITY: The Craft&Ride Bolt-On Carbon Fiber Fender is the strongest fender for Onewheel. With its vacuum molded carbon fiber construction, our fender exhibits a strength far superior to other materials. In combination with resin to form a composite, the Craft&Ride Bolt-On Carbon Fiber Fender maintains an extremely light weight of one pound whilst exhibiting an exceptionally rigid structure..
  • COMPATIBILITY: The Craft&Ride Bolt-On Carbon Fiber Fender is compatible with the Onewheel+ XR, Onewheel+, and original Onewheel..
Check Stock