Reviews Carbide Cutting Edges

Straight Router Bit Double Flute Plunge Router Bit Carbide Tipped Woodworking Tool 1/4’’ Shank Cutting Dia. 1/4 inch

  • ✔ Carbide Tipped Straight Plunge High Production: 1/4’’ cutting diameter x 7/9 inch Cutting Height x 1/4’’ Shank.
  • ✔ Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Open-flute design promotes rapid chip clearance, necessary for high feed rates..
  • ✔ Cuts all composition materials, plywoods, hardwoods, and softwoods.
  • ✔ High quality carbide tipped provide superior wear resistance and sharp edges..
  • ✔ In choosing a straight bit for any application, always select one with the shortest cutting edges and the shortest overall length that will reach the required cut depth.
Check Stock

Indexable Carbide Insert Knife 14.3x14.3x2.0mm-50° 2-Edge Replacement Cutter for Cutech Tool Rikon Carbatec and Most Planer Jointer Helical Cutterheads, 10 Packs

  • Standard Cutter Size: 14.3mm square with straight corners 2mm thick,2 indexable cutting edges, 50 degree cutting bevel. Inserts are used on planers/jointers with helical cutterheads..
  • Made of Premium K10 grade solid tungsten carbide, double life-time than general carbide cutters, and had been increased 30% hardness by our high temperature quenching..
  • Each cutter has 2 indexable sharp edges, if one is dull, no more sharpening, just turn to another edge which greatly reduces you down time. The right geometry or cutting angle is ground to the produce an edge the cuts cleanly and safely..
  • The inserts had been high precision polished, which increased the oxidation resistance and corrosion resistance of the cutter, combined with optimal grinding process to produce the flattest and truest cutting surfaces..
  • What You Get: Pack of 10 14.3 x 14.3 x 2mm square straight replacement carbide cutters, 10 pcs of professional M6 screws, our worry-free 12-month warranty, and friendly customer service. TJATSE committed to give Best Selection for your woodworking job..
Check Stock

SL-3 Tungsten Carbide Burr Rotary File Taper Shape with Radius End Double Cut with 1/4\Shank for Die Grinder Drill Bit

  • 【Advanced Carbide Material】The rotary burrs are made of Tungsten Carbide, which is sharp and sturdy. And the hardness can reach to HRC70. The durability of carbide burr is 10 times higher than high speed steel cutter (HSS cutter). 200 times more than the small wheel durability. Comprehensive processing costs can be reduced by about 10 times..
  • 【Double Cut or Single Cut】Double cut burr have more cutting edges and could remove material much faster. It is more suitable for relatively low density materials such as wood, plastic, aluminum, soft steel and all non-metal materials. Single cut burr provides large, wide flutes evacuate the large chips easily and also prevent iron-chip accumulate and over-heat cause cutter head damage. It is more suitable for relatively high density materials such as iron, alloy steel, stainless steel etc..
  • 【Professsion 20 PCS Set】The carving bits include A, C, D, E, F, G, H, L, M and N type burrs. There are 2 sizes for each type burrs, which is 1/8 shank 1/8 head diameter and 1/8 shank 1/4 head diameter. They are suitable for almost everything you need for engraving, cutting, shaping, grinding, polishing and removing sharp edges..
  • 【Easy to Use】 If the cutting bits are chipping easily this could be due to the speed ....
Check Stock

6 Inch Diameter Steam Whistle Blowing

  • 48" Long, Choose from 6", 9", 12", 15", 18" Diameters.
  • Replaceable Carbide Bullet cutting edges (industry standard replacement parts).
  • Replaceable rock tip with carbide bullet edges.
  • 6", 9", 12" ship free via ground, 15" and 18" ship freight to commercial address.
  • Fits 2" hex head or 2-9/16" round power head.
Check Stock

End Mill Bits 5Pcs 6mm Shank Single Flute End Mills Drill Bit Tool Tungsten Carbide CNC Router Milling Bits for Wood Aluminum Steel PCB PVC Circuit Boards Acrylic Carbon Fiber

  • [Specification]: Shank diameter 6mm/0.23".
  • [Single Flute End Mills]: 5 Pcs end mill bits.
  • [ Cutting Edges]: The milling cutter has edges, it can milling holes, s and edges on plates smoothly.
  • [Premium Material]: These drill bits are made of premium tungsten carbide for good milling.
  • [Widely Application]: This carbide end mill is widely used for engraving such as PCB PVC MDF, circuit boards, Acrylic, carbon fiber and other soft materials.
Check Stock

aTourer Tungsten Carbide Burr Set Rotary File Rasp 1/8 & 1/4 Cutting Head Die Grinder Milling Bit 20pcs Single Burr Double Cut 20pcs

  • 【Advanced Carbide Material】The rotary burrs are made of Tungsten Carbide, which is sharp and sturdy. And the hardness can reach to HRC70. The durability of carbide burr is 10 times higher than high speed steel cutter (HSS cutter). 200 times more than the small wheel durability. Comprehensive processing costs can be reduced by about 10 times..
  • 【Double Cut or Single Cut】Double cut burr have more cutting edges and could remove material much faster. It is more suitable for relatively low density materials such as wood, plastic, aluminum, soft steel and all non-metal materials. Single cut burr provides large, wide flutes evacuate the large chips easily and also prevent iron-chip accumulate and over-heat cause cutter head damage. It is more suitable for relatively high density materials such as iron, alloy steel, stainless steel etc..
  • 【Professsion 20 PCS Set】The carving bits include A, C, D, E, F, G, H, L, M and N type burrs. There are 2 sizes for each type burrs, which is 1/8 shank 1/8 head diameter and 1/8 shank 1/4 head diameter. They are suitable for almost everything you need for engraving, cutting, shaping, grinding, polishing and removing sharp edges..
  • 【Easy to Use】 If the cutting bits are chipping easily this could be due to the speed ....
Check Stock

Yosoo Cemented Carbide Engraving Drill Bit End Mill Carving Drill for PCB CNC SMT Rotary Burr 2mm Milling Cutters Set(10pcs)

  • 【Ultrafine Grain Cemented Carbide】：Made from ultra-fine grain cemented carbide material with good milling, cutting performance, ensuring high work efficiency..
  • 【Excellent Performance】：Have sufficient anti-bending strength, wear resistance, high hardness, high wear resistance and high strength..
  • 【Sharp Cutting Edge】：Sharp cutting edges, can be use for milling holes, grooves and edges on plates and the process will be smooth..
  • 【Polished Surface】：Well polished surfaces are quite clean, neat, and there is no glitches or burrs on the shank..
  • 【Engraved Item Materials】：Many items or materials can be engraved such as circuit boards, metal, plastics, stainless steel and copper..
Check Stock

OSCARBIDE 15mm Square Carbide Inserts Cutters 15 x15 x2.5-R150 Replacement Insert Cutter 6”Radius Face for Woodworking Spiral/Helical Planer Cutter Head Wood Turning Tool 10pcs

  • Carbide Cutter size: 15mmx15mmx2.5mm,4-indexable cutting edge,30* Cutting bevel, With 150mm Radius and 4 Radius Corners,polished to a mirror finish....
  • Made of Tungstern Carbide, more endurable ,for long time using..
  • This replacement carbide inserts are specifically designed to fit Titan Spiral Shear Heads for surfacing/planing cutterhead,groovers,helical head etc.
  • Each individual cutter insert is sharpened on four sides, all of the 4 edges can be rotated to expose a new cutting edge when dull or chipped..
  • Carbide inserts were sold in boxes of 10,packed with a plastic container for safe and easy storage..
Check Stock

SKIL 75740W 7-1/4-Inch 40-Tooth Carbide Tipped Circular Saw Blade for SKIL Circular Saw 5280-01/5180-01/5080-01

  • Carbide teeth can last up to 60 times longer than standard steel blades.
  • Compatible with 7-1/4" diameter circular saws 5280-01/5180-01/5080-01.
  • Included components: 7-1/4-Inch 40-Tooth Carbide Tipped Saw Blade.
  • Enjoy smooth cutting performance for framing and general-purpose cutting with the Skil 40-Tooth Carbide-Tipped Saw Blade. It comes with sharp cutting edges and induction hardened teeth for durability. This 7-1/4" circular saw blade fits most standard circular saws. It comes with a clear, anti-stick coating that helps reduce friction and binding during use. The Skil saw blade also comes with a 5/8" diamond knock-out arbor to make installation and removal easy..
Check Stock

CMT 880.541.11 Solid Surface Rounding OverNo-Drip Bit W/Bearing, 1-Inch Diameter, 1/2-Inch Shank

  • 1-Inch Cutting Lengh, 1/2-Inch Radius, 18° Cutting Angle, 3-5/64-Inch Overall Length..
  • Roundover and trim the countertop edges after the bowl is mounted..
  • Features a non-marring Delrin bearing to protect the finished edges..
  • 2 Hi-Density carbide-tipped cutting edges for long-lasting performance on wood..
Check Stock

uxcell 1/8" Shank 0.8mm x 3mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

uxcell 5PCS 1/8" Shank 1.5mm x 12mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

CMT 854.003.11 Bull Nose Bit, 1/4-Inch Shank, 3/16-Inch Radius

  • 1-Inch Diameter, 7/8-Inch Cutting Length, 3/8-Inch Minor Cutting Length, 2-9/64-Inch Length..
  • For making the edges of stair treads, window sills, shelves and more..
  • Create an oval edge by using a bit with a bead diameter larger than the stock thickness..
  • Non-Stick Orange Shield Coating, Anti-Kickback Design, Equipped with Bearing..
  • 2 SinterHip Hi-Density Industrial Chrome Carbide cutting edges for long-lasting performance..
Check Stock