Reviews Carb For 5 3 Ls

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • ... 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in half..
Check Stock

DNA Motoring GKT-A-2-DP-DNT-GPT-KIT Graphite Aluminum Gasket Plus Donut Studs Bolts Kit,Metallic

  • 1-3/4” and 1-7/8” tubing diameters available for increased exhaust flow increasing performance and improved throttle response.
  • CNC Mandrel-bent tubes provide consistent tubing diameters for smooth flow and increases the cylinder scavenging effect.
  • Made of high quality T-304 stainless steel with computerized mandrel-bends for strength and durability.
  • Note: Headers are not equal length, due to the LS cylinder heads being offset approx 1 /2" from the factory Note: Headers do not utilize the factory....
  • Fitment:Ls Turbo Manifold Fits LS1, LS2, LS3, LS4, LS6, LSX 4.8L, 5.3L, 5.7L, 6.0L, 6.2L V8 engines 1997-2014.
Check Stock

Michigan Motorsports Front Crankshaft Damper Seal Gen 3 Gen 4 LS LS1 4.8 5.3 5.7 6.0 6.2 7.0

  • Michigan Motorsports LS1 Front Crankshaft Damper Seal.
  • Fits all 1997-2013 Gen 3&4 LS Based V8 Engines.
  • LS1 LS2 LS3 LS6 LS7 LS9 L99 LSA LS9 L92 L9H L94 LS2 L76 L77 LY6 L96 LFA LZ1 LY5 LMG LMF LH6 LC9 LY2 L20 L33 LQ4 LQ9 LR4 LM7 L59 LS4 LH8 LH9.
Check Stock

DNJ TK1116B Timing Chain Kit for 2009-2010 / Chrysler, Dodge / 300, Avenger, Charger, Sebring / 2.7L / DOHC / V6 / 24V / 167cid

  • C5R GM Timing Chain Set LS1 LS2 LS3 LS6 LM7 LQ4 4.8 5.3 5.7 6.0 6.2 7.0.
  • This is the same chain used in the C5-R and C6-R racing engines built by Katech..
  • Never broken in all of C5-R racing and durability testing.
  • Fits all Gen 3 and 4 GM LS-based engines.
  • GM 3 bolt cam sprocket (58X), 12586481GM Crank Sprocket 12556582, C5-R Timing Chain, Timing chain dampener 12588670, ARP cam bolts 134-1003.
Check Stock

TIKSCIENCE LS Gen 3 ECM Engine Programming Control Module Reader Diagnostic PCM Bench Harness w/Power Supply Fits for GM Chevy All Blue/Red & Blue/Green 1999-2007 OBD2 Port 18 Gauge 12 Volt

  • Gen 3 LS ECM Programming Bench Harness Application - This bench-top harness that plugs into a standard wall outlet and allows you to connect a Gen 3....
  • LS LS1 Gen III Bench Harness Fitment - This works with HP Tuners, OBDII scan tools, and other programming methods that use the OBDII port for....
  • Gen III Programming Harness Tool Function - The electronic control unit of the automobile electrical system collects part of the working status....
  • Premium Quality LS1 OBDII Bench Harness - This LS LS1 OBDII Bench Harness features a redesigned housing to insure it lasts longer than the factory....
  • What Will You Get: One set OBDII Gen 3 Programming Bench Harness with Power Supply fits for GM Chevy LS LS1 5.3 5.7 6.0. We offer 1 year service with....
Check Stock

Replacement USB PC Charger Data Cable Cord Lead for Panasonic Camera Lumix DMC-ZS25 DMC-TZ35 DMC-G7 ZS40 ZS50 TS30 SZ3 TZ8 TZ11 TZ15 TZ24 by AlyKets

  • USB PC Charger Data Cable/Cord/Lead For Panasonic CAMERA Lumix DMC-ZS25 DMC-TZ35.
  • Compatible with: Lumix DMC-F2, DMC-FH25, DMC-FH4, DMC-FH5, DMC-FH6, DMC-FH7, DMC-FH8, DMC-FP5, DMC-FP7, DMC-FP8, DMC-FS12, DMC-FS14, DMC-FS16,....
  • Compatible with: Panasonic Lumix DMC-FS3, DMC-FS30, DMC-FS33, DMC-FS35, DMC-FS37, DMC-FS40, DMC-FS41, DMC-FS45, DMC-FS5, DMC-FS62, DMC-FS7, DMC-FT20,....
  • Also compatible with: Panasonic Lumix DMC-FX8, DMC-FX80, DMC-FX9, DMC-FX90, DMC-FZ1, DMC-FZ10, DMC-FZ15, DMC-FZ150, DMC-FZ18, DMC-FZ2, DMC-FZ20,....
  • Also compatible with: Panasonic Lumix DMC-L10, DMC-LS1, DMC-LS2, DMC-LS3, DMC-LS6, DMC-LS70, DMC-LS75, DMC-LS80, DMC-LS85, DMC-LX1, DMC-LX2, DMC-LX3,....
Check Stock

Exhaust Header Manifold For Chevrolet LS1 LS6 LSX V8 Turbo+2 x Elbows T3 T4 To V Band 3.0

  • Huge 1 3/4" Stainless Primary Tubes (true 1 3/4 unlike the others listing the same header by multiple companies with multiple sizes).
  • 7/16" Thick Flanges 3" V-Band Collectors, CNC Mandrel Bent Pipes for Excellent Flow, 4 to 1 Header Design to Create a Compact Package for Universal.
  • T3 : hole to hole 45*86mm/T4 : hole to hole 70*83mm/V band Flange 80mm ID 93mm OD.Cast Turbo Elbow Adapter T3 T4 to 3" V-Band SS304.
  • 304 Stainless Steel Cast and Machined Adapter, with Tight Radius. Works for Many Turbo Applications. V band Flange Allows Rotation of the Turbo At Any Angle. Flange Is Threaded with 4 M10x1.5 Holes.
  • Application : Small Block V8 LS1/LS2/LS3/LS6 LSX 4.8L, 5.3L, 5.7L, 6.0L, 6.2L.
Check Stock

Remflex 2049 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Reflex's unique flexible graphite material has been proven for more than 30 years.
  • Chevy V8 - 4.8L, 5.3L, 5.7L- LS1, LS6 /6.0L- LS1, LS2 Vortec, 1-3/4" Round Port, For Headers, 2/Set.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex Exhaust Gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

SNIPER 870021 MAP Sensor 2.5-Bar EFI Fabricated Intake Manifolds

  • Perfect Match - The Lexar + Big Mouth Billet Throttle Body Kit is the best induction choice for GM 4. 8, 5. 3, 5. 7, 6. 0, 6. 2 LS engines with LS1/LS2/LS6 cathedral port heads. Improves throttle response, torque and airflow..
  • Untouched Performance for GM LS - The FAST Lexar is the standard in airflow, torque and horsepower production. Interchangeable intake runners allow for tuning of power band..
  • The Quality Option - If you want to make power with your LS, avoid sheet metal intakes. Cheap aluminum manifolds trap heat and decrease efficiency. The Lexar uses advanced polymer materials to cool intake temps for increase airflow and engine efficiency..
  • Pop the Hood - The FAST Lexar Intake and Big Mouth Throttle Body are an excellent upgrade not just for performance but also look great. The Lexar features a sleek black finish, FAST logo with an option to add billet fuel rails. The Big Mouth Throttle Body features a slick natural billet aluminum finish..
Check Stock

GEILIENERGY BT18433 BT28433 BT184342 BT284342 BT-1011 Battery Compatible for Cordless Phone CS6209 CS6219 CS6229 DS6151 CL80100 CL80109 DCX400 Handset (Pack of 2)

  • ...-5 DS6201 DS6211 DS6211-2 DS6211-3 DS6211-4 DS6221 DS6221-2 DS6221-3 DS6221-4 DS6221-5 DS6222-4 DS6222-5 DS6301 DS6321 DS6321-3 DS6321-4.
  • Compatible with: CS6209 CS6219 CS6229 DS3101 DS3111-2 DS6111 DS6111 DS6115 DS6121 DS6122 DS6201 DS6211 DS6211-2 DS6211-3 DS6211-4 DS6221 DS6222 DS6301 DS6321 ip-8300 ip-831 IS6110 LS6113 LS6204 LS6205 LS6215-2 LS6226-2 LS6245 VS6121-4 VT6042 VT6043 VT6052 VT6053 Sanik: 2SN-AAA55H-S-J1 2SN-AAA60H-S-J1 2SN-AAA65H-S-J1 2SN-AAA70H-S-J1 2SN-AAA70H-SX2F 2SNAAA55HSJ1 2SNAAA60HSJ1 2SNAAA65HSJ1 2SNAAA70HSJ1 2SNAAA70HSX2.
  • NOTICE:BT18433/BT28433 ≠ BT18443/BT28443!!!Please confirm your original battery part number or cordless phone models before purchase..
Check Stock

Gen III LS Head Gasket Kit for GM Chevy LS1 LS6 LQ4 LQ9/4.8L 5.3L 5.7L 6.0L 1997-2007 Cylinder Engine Block Valley Cover Gasket 12589226 12612350 12558178

  • ..., 12558177, 12622033, 12589227 ,12573460, 12558177 12630223,12633904,12637683.
  • Gasket Set Compatible with Gen 3 Series GM Chevy Vortec LS1 LS6 LQ4 LQ9 4.8L 5.3L 5.7L 6.0L, LS3, LS2, and 6.0L iron blocks, 4.8L/5.3L and LS1/LS6.
  • Fit for 1997–2004 Chevrolet Corvette C5/1998–2002 Pontiac Firebird Formula, Trans Am /1998–2002 Chevrolet Camaro Z28/1998–2002 Chevrolet Camaro SS/2004 Pontiac GTO /2001–2004 HSV GTO /1999–2005 Holden Statesman/2001–2005 Holden Monaro.
  • Fit for 2001–2004 Chevrolet Corvette C5 Z06 /2004–2005 Cadillac CTS V-Series/2007 SSC Ultimate Aero TT.
  • Package: (1)Oil filter adapter gasket#12611384/(1)LS oil galley barbell plug#12573460/(1)Rear Main Crank Seal#89060436/(1)Front Main Crank Seal#12585673/(2)Knock Sensor Grommet# 12558177/(4)Water Block Off Gaskets#12551933/(2)LS Water Pump Gasket #12630223/(1)Front Cover Gasket#12633904/(1)Rear Main Seal Gasket#12639249/(1)Oil Pan Gasket#12612350/(2)Cylinder Head Gasket#12589226/(1)Engine Block Valley Cover Gasket#12558178/(1)Exhaust Manifold Gasket#12617944/(1)Valve Cover Gasket#12637683.
Check Stock

EVIL ENERGY Fuel Filter Regulator 58 PSI Kit for LS Swap EFI Conversion

  • Function: Fuel pressure regulator filter used to create a returnless fuel supply for LS engine swaps and electronic fuel injection conversions. This bypass regulator passes excess fuel back into the tank so the pump can run freely..
  • Feature: The fuel filter regulator with 6AN adpater fittings for LS Swap delivers 58 PSI (4 BAR) to your fuel rail and returns unused gas to the tank, and build-in a 10 micron fuel filter ensures clean fuel is delivered to your engine, thus to protect the normal operation of the engine, reduce wear, avoid blocking, improve the purpose of engine life..
  • Compatible with: The fuel filter pressure regulator compatible with Chevrolet 1999-2014 V8 5.3L/325 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 4.8L/294 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 6.0L/364 Chevy small block Gen III/IV (LS-based engines). Please you check the part is your need before purchase..
  • Installation: fuel filter regulator kit for LS Swap EFI Conversion can be installed anywhere between the tank and the engine, although it is usually installed in the engine compartm....
Check Stock

RJSPHH Pushrod Set 7.400\ Longx .080\

  • 7.400" One Piece Pushrods, 5/16" diameter, and .080" wall (set of 16).
  • made of 4130 Structural Steel material for premium quality and high performance.
  • Replacement pushrods for 1997-2012 GM LS-series GEN III and IV small block V-8 engines. Fits 4.8 5.3 5.7 6.0 LS1 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92.
  • Compatible with 99-02 Camaro & Firebird, 10-13 Camaro, 99-13 Corvette, 04-06 Pontiac GTO, 04-07 Cadillac CTS-V, 08-09 Pontiac G8, 00-13 Tahoe/Yukon/Escalade, 03-09 H2 , 01-13 Chevrol Avlanche, 99-13 Silverado & Sierra 4.8L/5.3L/6.0L.
  • High Quality, Long Lasting Finish - Pushrods are all finished with a black oxide coating, ensuring the the chromemoly steel will not rust or wear prematurely..
Check Stock