Reviews Car Tweeter

Massive Audio CT2 - Silk Dome 160 Watt Max / 80w RMS, 28mm Car Audio Tweeter Set with Crossovers, Surface, Angle or Flush Mount Options

  • HIGH PERFORMANCE CAR TWEETERS WITH QUALITY SOUND | One of the best sounding tweeters for car audio in the market. These Massive Audio Tweeters have high powered drivers that deliver rich high frequency playback. With exceptional clarity and crispness, the CT2 28mm Tweeters will be the perfect addition to your car audio installation. Angle, Flush& Surface Mounting these in dash tweeters are easy to install and may last longer than your car!.
  • LOUD AND CRISP | Don't let the size these car stereo tweeters fool you! Experience very loud clean clear highs that scream even from a great distance! These best car tweeters feature High Flux Density Neodymium Magnets, Infused Silk Diaphragm with Kapton Voice Coils, 60 Watts RMS / 120 MAX, 92dB Sensitivity, 1.4kHz - 20kHz, 4 Ohm, you will hear these clear sounding tweeters even over hard hitting Mids and Subwoofers!.
  • HIGH QUALITY, LONG LASTING CONSTRUCTION | These car tweeters are built to last! Unlike other brands that are only good for a few months of pounding, these tweeters do not crackle over time. With 28mm Silk Dome for smooth Natural Smooth Sound Reproductions, Ferro Fluid Cooled Motor Structure for Added Efficiency, Infused Silk Diaphragm with Kapton Voice Coils, 6dB In-Line Crossover with High Grade Capac....
Check Stock

Massive Audio CT4X - 1 Inch/25.5mm, 120 Watts Max, 30 Watts RMS, Neodymium Tweeter – 57mm Power Bullet Tweeter Speaker for Cars, Heavy Duty Black Anodized Titanium (Sold as Each)

  • FIRST CLASS CAR TWEETERS WITH AMAZING SOUND | Some of the best sounding tweeters for car audio in the market. Our Massive Tweeters have high powered compression drivers that deliver rich high frequency playback. With exceptional clarity and crispness, the CT4X Power Bullet Tweeters will be the perfect addition to your 12 Volt Pro system!.
  • LOUD AND CRISP | Experience ear piercing clean clear highs that screams even from a great distance! This best tweeter features High Density Neodymium Magnets, Die Cast Aluminum Frames, 30 Watts RMS / 120 PEAK, 100dB, 3kHz - 25kHz, 4 Ohm, you can hear these power tweeters scream over your bass!.
  • HIGH QUALITY, LONG LASTING CONSTRUCTION | This Power Tweeter is built to last! Unlike other brands that only last a few months, this power tweeter will not distort over time. With 57mm CCAW Field Replaceable Voice Coils, 1" Throat Size, 6dB Hi-Pass Filter 2.2uF/250V Capacitor, and CNC Aluminum Phase Plug To Reduce Heat, this easy to mount tweeter will last longer than your car stereo!.
  • EXCEEDS YOUR EXPECTATIONS | This bullet tweeter speaker is a great replacement tweeter for your factory tweeter, pioneer tweeter, rockford fosgate tweeter, kicker tweeters and many more! Install and easily mount as a jeep wrangler tweeter, jeep gr....
Check Stock

3.75'' Titanium Horn Tweeter (Pair) - Aluminum Bullet Diamond Chrome Cutting Finish w/ 300 Watt Peak 20 oz Magnet Structure 2kHz - 25kHz Frequency Response 4 Ohm & 1\ Kapton Voice Coil - Pyle PDBT18

  • 2kHz - 25kHz FREQUENCY RESPONSE: Pyle, 3.75'' aluminum bullet titanium horn tweeter has a 20 oz magnet structure, ferrofluid enhanced voice coil and frequency response. This car speaker is pack with exceptional 99dB (1w/1m) decibel sensitivity.
  • 1'' KAPTON VOICE COIL: Pyle car sound speaker system is capable of 1'' high-temperature kapton voice coil. It will increase performance and efficiency of heavy-duty play time through lower weight and higher operating temperatures.
  • 150W RMS AND 300W PEAK: This car speaker can provide up to 150 watts RMS or 300 watts peak power because it is 20 oz magnet structure. A pair of round 3.75'' 300 watt tweeters - carrying both the high and low end for a fuller range sound.
  • CHROME CUTTING FINISH: This car speaker super tweeter is diamond chrome cutting finish. The tweeter measures 3.75'' in overall diameter in a mounting depth at 2''. The product includes mylar crossover capacitor.
  • LOUD AND CLEAR: Pyle car speaker super tweeter were carefully combined to reproduce sound clearly with outstanding responsiveness. It features solid construction and accurate power handling ratings.
  • 3.75 Aluminum horn with 1 super bullet tweeter.
Check Stock

KICKER 46CSS684 6x8 450w Car Audio Component Speakers+2 CSC68 Coaxial Speakers

  • Package Includes: (1) Kicker 46CSS684 6X8" 9450w Car Audio Component Speakers w/ 0.75" Tweeters CSS68, (1) Pair of Kicker 46CSC684 CSC68 6"x8" 6x8 450 Watt 4-Ohm Car Coaxial Speakers CSC684.
  • Features of 46CSS684: KICKER 46CSS684 6X8" 9450w Car Audio Component Speakers w/ 0.75" Tweeters CSS68, Fits nearly every car made, 12dB crossovers with a smaller footprint for easier installation, Three-position tweeter switch for dialing in your highs, EVC (Extended Voice Coil) technology help deliver remarkable bass response, Titanium tweeter construction and neodymium magnets to reveal subtle details, Sunlight-treated poly-foam surround assists with precise linear excursion.
  • Phase plugs in the woofer cones eliminate any distortion, Steel mesh grilles protect your drivers, Three tweeter mounting options including flush, angled and surface pods, Dimension (L x W x H): 12.375 inch x 12 inch x 3.25 inch, Weight: 6 lbs.
  • Features of 46CSC684: Pair KICKER 46CSC684 CSC68 6"x8" 6x8 450 Watt 4-Ohm Car Coaxial Speakers CSC684, Fits nearly every car made, Zero-protrusion tweeters to fit nearly any factory depth, Woofer EVC (Extended Voice Coil) tech assists with precise linear excursion, sunlight-treated poly-foam surround resists heat or direct sunlight.
Check Stock

DriSentri 2pcs Dome Tweeters, 12V 500W High Efficiency Car Stereo Speakers, TP-006A Mini Dome Tweeter Speakers for Car Audio System Accessories

  • High-quality Material: The audio tweeter is made of high-quality ABS material, which is sturdy and durable, not easy to wear, can be used for a long time..
  • Features: The car audio speaker is processed by professional manufacturing,which has single buzzer and double buzzer, the playback sound is clear and delicate,this is a perfect choice if you are in need of audio speaker..
  • Easy to Install: The car tweeter is equipped with mounting screws, easy to install anywhere. For example, in the car, garage, room or living room. Compact size and easy to install..
  • Non-destructive Sound Quality: Our car tweeter is suitable for installation both in the car and at home. Suitable for various music styles, pop, classical, rock, etc., so you can enjoy lossless music..
  • Wide Application: The tweeter stereo speaker can be suitable for all car audio systems with 12V DC power supply. Fit for most of car truck in the market, provide you with quality sound output..
Check Stock

2\ Inch Titanium Horn Driver - 600W High Power Car Audio Midrange/Tweeter Compression Horn Driver System w/ Aluminum Voice Coil, 1.5kHz ~ 18kHz Frequency,102dB, 8 Ohm, 13.5oz Magnet - Pyle PDS541

  • 600 WATT POWER: This high powered audio projection midrange/tweeter system has a maximum power output of 600-watt peak power / 150 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 1.5kHz-18kHz FREQUENCY RESPONSE: The car tweeter compression driver has a frequency response of 1.5kHz ~ 18kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction. Fits horns w/ 1 3/8" x 18 TPI threads.
  • 8 OHM IMPEDANCE: This car tweeter has 2" flat aluminum voice coil, 102dB @ 1W/ 1M, & 8ohm impedance rating that compensates the undersized wire found in most cars. Reduces distortion so you can enjoy crisp & clear sound.
  • 2” TITANIUM DIAPHRAGM: PylePro follows the standard size for most car stereo systems & created this midrange/tweeter compression horn driver with 2-inch titanium diaphragm. This high power tweeter compression horn will get you higher than high.
  • 60 OZ MAGNET STRUCTURE: These tweeters have a 60 oz magnet structure. The heavy-duty housing provides a strong foundation & is easy to install to your car's sound system. Provides crispest, most accurate highs possible w/ modern speaker technology.
  • Midrange/Tweeter compression horn driver.
Check Stock

Rockville Pair RV68.2C 6×8 / 5×7 Component Speakers+6×8 Coaxial 3-Way Speakers

  • Package Includes: (1) Pair of RockvilIe RV68.2C 6×8 / 5×7 Component Car Speakers 900 Watts/170w RMS CEA. (1) Pair of RockvilIe RV68.3A 6×8″ 3-Way Car Speakers 900 Watts/170 Watts RMS CEA Rated. Includes: (2) 6×8 speakers. (2) tweeters. (2) Crossovers. (2) Grills. Flush and surface Mounting accessories. Speaker wire. Features: RockvilIe RV68.2C 6×8 and 5×7 Component car speakers (pair). Peak Power Rating: 900 Watts per Pair / 450 Watts Each.
  • CEA Compliant RMS Rating: 170 Watts per Pair / 85 Watts Each. Injection Molded Polypropylene woofer cone gives amazing bass and mids. Flex Motion Butyl Rubber Surround. 1.2 PEI dome tweeter with ferrite magnet give amazing highs. Flush and surface mounting tweeter options. Fine-tuned 2-Way Crossover, 12db/Octave Roll Off. Ferro Fluid Cooled Tweeter Magnet. Steel high quality basket. Rubber magnet boot cover. Frequency response: 32-22,000 Hz.
  • Crossover will cut anything lower than 3.5 Khz @ 12 dB / octave slope from the tweeters. Crossover will cut anything higher than 3.5 Khz @ 12 dB / octave slope from the woofers. Sensitivity: 91 dB @ 1w/1m. Mount depth: 2.52″. Impedance: 4 Ohm. Grilles included. Aluminum voice coils. 100% oxygen free copper voice coil windings. Black electro-plated T-yoke and washers. C....
Check Stock

4x10 Inch Horn Tweeter Speaker - Heavy Duty 200 Watt High Power Horn Audio Tweeter System w/ 25mm Voice Coil, 20 Oz Magnet Structure, 102 dB, 8 Ohm Impedance - Pyle PH391

  • 200 WATT POWER: This high powered audio projection horn tweeter system has a maximum power output of 200-watt peak power so you can play your favorite tracks as loud as you want and with style.
  • 1kHz - 15 kHz FREQUENCY RESPONSE: This car horn tweeter speaker has a frequency response of 1kHz - 15 kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction.
  • 8 OHM IMPEDANCE: This car tweeter has 102dB/w/m sensitivity and 8-ohm impedance rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • 25mm VOICE COIL: Pyle Pro follows the standard size for most car stereo systems and created this 4” x 10” horn car audio tweeter speaker with 25mm voice coil size.
  • 20 OZ MAGNET: This tweeter has a 20 oz magnet structure w/ heavy-duty housing that provides a strong foundation. It is super easy to install in your vehicle’s sound system. Total dimension measures 4.3” H x 10.6” W x 8.25” D.
Check Stock

1.5” Audio Car Tweeter Speaker - Aluminum Die-Cast Frame, 500 Watt Peak, 2 kHz - 25 kHz Frequency Response, 4 Ohm, Heavy Duty 30 oz. Magnet Structure - Pyle PDBT31 SILVER

  • 2 kHz - 25 kHz FREQUENCY RESPONSE: Pyramid’s 1'' car tweeter speaker has enhanced Ferrofluid and 2 kHz - 25 kHz frequency response that will complete a sound system of a car or woofer enclosure.
  • 500 WATT POWER: This bullet horn super tweeter speaker provides up to 500 watts peak power because it is equipped with 30 oz magnet structure. It's all housed in heavy duty aluminum housings.
  • 4 OHM IMPEDANCE: This car tweeter has 4 ohm impedance rating that compensates the undersized wire found in many of today’s cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • STANDARD SIZE: Pyramid follows the standard size for most car stereo systems and created this set with a 1” audio tweeter plus an aluminum frame. The heavy duty housing and structure provides a strong foundation.
  • SENSITIVITY: This titanium super tweeter is very easy to install with a capacitor crossover network and hardware. The sensitivity is 106dB and weighs 3.4 lbs.
Check Stock

3 Car Audio Speaker Tweeter - 1000 Watt High Power 3 Inch Super Titanium Tweeter System w/ Die Cast Aluminum Frame, 2k - 25 kHz Frequency, 109 dB, 4-8 Ohm, Heavy Duty 100 oz Magnet - Pyramid TW57

  • 1000 WATT POWER: This high powered audio projection tweeter system has a maximum power output of 1000 watt peak power / 500 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 2k - 25 kHz FREQUENCY RESPONSE: This car tweeter speaker is ferro fluid enhanced and has a frequency response of 2k-25kHz that will complete your current car woofer enclosure system for full range stereo sound reproduction.
  • 4-8 OHM IMPEDANCE: This car tweeter has 109 dB SPL and 4-8 ohm impedance rating that compensates the undersized wire found in many of todays cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • STANDARD SIZE: Pyramid follows the standard size for most car stereo systems and created this 3-inch super titanium car audio speaker tweeter w/ high temperature voice coil, die cast aluminum frame, and has a 5" diameter / 2 mounting depth.
  • STRONG STRUCTURE: This complete tweeter has a 100 oz magnet structure and comes with a crossover capacitor. The heavy duty housing and structure provides a strong foundation and it is super easy to install.
Check Stock

DS18 EN2T High Density Abs Universal A Pillar Pod 2 X 1 Tweeters (No Tweeters)

  • 300 Watt power: This high powered audio projection tweeter system has a maximum power output of 300 Watt peak power/ 150 Watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 2kHz - 25 kHz frequency response: This car tweeter speaker is Ferro fluid enhanced and has a frequency response of 2kHz - 25 kHz that will complete your current car woofer enclosure system for full range stereo sound reproduction.
  • 4-8 Ohm Impedance: this car tweeter has 1” high temperature Kapton voice coil, 98 dB SPL and 4-8 Ohm Impedance Rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • Standard SIZE: Pyle Pro follows the standard size for most car stereo systems and created this 1 inch super titanium car audio tweeter speaker with 3.75 inch aluminum Bullet horn and has a 3.75” diameter and 2” mounting depth.
  • Strong structure: This pair of tweeters have 20 oz Magnet structure and comes with a Mylar capacitor Crossover network. The heavy duty housing and structure provides a strong foundation and it is super easy to Install.
Check Stock

1.5\ Car Audio Speaker Tweeter - 400 Watt High Power 1.5 Inch Super Titanium Tweeter System w/ Die Cast Aluminum Frame, 2 kHz-25 kHz Frequency, 105 dB, 4-8 Ohm, Heavy Duty 60 oz Magnet - Pyramid TW46

  • 400 WATT POWER: This high powered audio projection tweeter system has a maximum power output of 400 watt peak power / 200 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 2k - 25 kHz FREQUENCY RESPONSE: This car tweeter speaker is ferro fluid enhanced and has a frequency response of 2k-25kHz that will complete your current car woofer enclosure system for full range stereo sound reproduction.
  • 4/8 OHM IMPEDANCE: This car tweeter has 105 dB SPL and 4-8 ohm impedance rating that compensates the undersized wire found in many of today’s cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • STANDARD SIZE: Pyramid follows the standard size for most car stereo systems and created this 1.5 inch super titanium car audio speaker tweeter with die cast aluminum frame and has a 4" diameter / 2.5" mounting depth.
  • STRONG STUCTURE: This complete tweeter has a 60 oz magnet structure and comes with a capacitor crossover network. The heavy duty housing and structure provides a strong foundation and it is super easy to install.
Check Stock

Pyle-Pro 4x4 Inch Speaker-Heavy Duty 150 Watt High Power Horn Audio Tweeter System w/ 25mm Voice Coil, 15 Oz Magnet Structure, 1kHz-18 kHz Frequency, 105 dB, 8 Ohm Impedance-Pyle (PH44)

  • 150 WATT POWER: This high powered audio projection horn tweeter system has a maximum power output of 150-watt peak power so you can play your favorite tracks as loud as you want and with style.
  • 1kHz - 18 kHz FREQUENCY RESPONSE: This car horn tweeter speaker has a frequency response of 1kHz - 18 kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction.
  • 8 OHM IMPEDANCE: This car tweeter has 105dB/w/m sensitivity and 8-ohm impedance rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • 25mm VOICE COIL: Pyle Pro follows the standard size for most car stereo systems and created this 4” x 4” horn car audio tweeter speaker with 25mm voice coil size.
  • 15 OZ MAGNET: This tweeter has a 15 oz magnet structure w/ heavy-duty housing that provides a strong foundation. It is super easy to install in your vehicle’s sound system. Total dimension measures 4.5” H x 4.5” W x 4.45” D.
Check Stock