Reviews Car Radio Antennas

Universal Car Radio DIN Aerial Y Splitter by Keple | Diversity Male to Female Antenna Extention Lead Navigation 1.5ft

  • This Car Antenna Splitter from Male to 2 Female Motorola Style Connectors An Aerial Adaptor is needed when replacing the Original Factory fitted head unit with an Aftermarket Head unit..
  • It is the best solution for Strengthening Car Radio Signal Reception. It can choose the best radio signal between the two vehicle mounted antennas..
  • This Standart Car Radio Antenna Cable covered with high quality, corrosion resistant PVC material..
  • Connections: 1x Male Radio Antenna Plug‚ 2x Female Jacks..
  • Compatibility: Fits standard car radio antenna cables, such as Audi, BMW, Mercedes & VW 1988-2005 models, Mazda, Seat, Opel, Ranger, Chevrolet, Honda, Buick, Lincoln, Pontiac GTO, Pioneer, Kenwood Navigation..
Check Stock

E-outstanding 1 Pair AM FM Radio Universal Antenna, 62.5cm 24.6\ Length 4 Section Telescopic Stainless Steel Replacement Antenna Aerial for Radio TV

  • E-outstanding 4 Sections Telescopic Antenna made of Stainless Steel and Brass Great replacement for your damaged TV antenna or FM radio..
  • Installed easy and have multiple uses replacement part for radio equipment, television, car antennas, phone antennas, etc..
Check Stock

Ancable 2-Pack AM FM Antenna 62cm 24.4\ Long 4 Sections Telescopic Antenna for Radio TV

  • Ideal replacement part for radio, television, car antennas, phone antennas, etc. Easy to install.
  • Made of Stainless Steel and Brass Copper,great quality.
Check Stock

GRA-ULT01 Lightweight Portable Antenna Mast Mount Tripod Tower UHF SO239 Connector for GRA-7350T Ham Radio Amateur Outdoor | GABiL

  • GRA-ULT01 is a telescopic portable tripod for UHF connector portable antennas. Made by Gabil Radio in Taiwan. Designed as part of a portable, backpack, base, travel antenna system for Ham Radio. It is for transmitting and receiving on HF and VHF radio frequencies..
  • A portable mini tower for field deployment of GRA-7350T and other types of antennas such as mobile ham or CB mobile antennas. You can also unscrew the UHF connector and replace it with a gimbal. Make it a camera tripod..
  • COMPATIBILITY: Fully compatible with all Super Antenna equipment, Ham radio mobile antennas. CONNECTOR: SO-239 (PL259 compatible). FITTINGS: Antenna fitting is radio industry standard UHF connector, compatible with standard ham mobile antennas. Works with Ham, Marine, Government, NGO, CAP, MARS, EmComm, Shortwave, CB, MURS, FRS, GMRS, PMR, Weather, FM, Scanner, and everything in between..
  • Connector: 50 Ohm, SO239 to SO239. Minimum working size: 4.72 inch. Maximum working size: 2.6 feet. Weight: 1.1lb. Tripod material: Aluminum alloy for Aerospace. Maximum Loading Weight: 6.6lb..
Check Stock

aftid - 4 Inch Aluminum Stubby Antenna Compatible with Dodge RAM 1500 2009-2023

  • REPLACE FOR YOUR VEHICLE ACCESORIESS | Add a stylish and modern style short antenna (4 in) to replacement available for your Dodge RAM 1500 2009-2023.
  • 4 INCH BLACK Aluminum Antenna | This antenna is out of 7073 aluminum. 4 Inches long antenna has internal threads, exact match for your truck antenna. The finish is a hard black anodized that will last forever without fading or chipping.
  • MODERN LOOKING | The mini antenna has stylish screw-on antenna intended can improve the look of your vehicle. This stubby antenna doesn't affect any satellite services such as On-Star GPS or Radio..
  • CONVENIENT INSTALLATION | Only Takes A Few Minutes, No Modification Required! Simple Screw In Design With No Cutting Drilling Or Alterations To Your Vehicle. Upgrade the look of your vehicle in under one minute..
  • SUPPORT CAR WASH | Solidly Built antennas do not bend or break during a car wash, short and stylish antennas also do not need to be removed.
Check Stock

aftid – 4 Inch Aluminum Stubby Antenna Compatible with Ford F150 1997-2023

  • REPLACE FOR YOUR VEHICLE ACCESORIESS | Add a stylish and modern style short antenna (4 in) to replacement available for your Ford F150 1997-2023.
  • 4 INCH BLACK Aluminum Antenna | This antenna is out of 7073 aluminum. 4 Inches long antenna has internal threads, exact match for your truck antenna. The finish is a hard black anodized that will last forever without fading or chipping.
  • MODERN LOOKING | The mini antenna has stylish screw-on antenna intended can improve the look of your vehicle. This stubby antenna doesn’t affect any satellite services such as On-Star GPS or Radio..
  • CONVENIENT INSTALLATION | Only Takes A Few Minutes, No Modification Required! Simple Screw In Design With No Cutting Drilling Or Alterations To Your Vehicle. Upgrade the look of your vehicle in under one minute..
  • SUPPORT CAR WASH | Solidly Built antennas do not bend or break during a car wash, short and stylish antennas also do not need to be removed.
Check Stock

Heavy Duty SO-239 5' Antenna Magnet Mount w/ 15ft Cable - ANLI JM-100UHF

  • Heavy Duty Black large 5 inch diameter Magnetic mount accepts Optional Antennas having a PL-259 " UHF , M or PO " base thread..
  • Includes 15ft RG-58A/U Built in Coax cable with PL-259 Connector on Radio end of Cable..
  • Great for Amateur radio & Two way mobile antennas having an UHF base thread..
  • Fits ANLI WH-713 and WH-717 DualBand antennas, & other " UHF" ( SO-239 , SL16 ) type base thread antennas..
  • Genuine ANLI Brand Item In Original ANLI Package..
Check Stock

aftid - 4 Inch Aluminum Stubby Antenna Compatible with 2007-2023 Chevy Silverado (M7 Thread)

  • REPLACE FOR YOUR VEHICLE ACCESORIESS | Add a stylish and modern style short antenna (4 in) to replacement available for your Chevy Silverado 2007-2023 (M7 Thread).
  • 4 INCH BLACK Aluminum Antenna | This antenna is out of 7073 aluminum. 4 Inches long antenna has internal threads, exact match for your truck antenna. The finish is a hard black anodized that will last forever without fading or chipping.
  • MODERN LOOKING | The mini antenna has stylish screw-on antenna intended can improve the look of your vehicle. This stubby antenna doesn't affect any satellite services such as On-Star GPS or Radio..
  • CONVENIENT INSTALLATION | Only Takes A Few Minutes, No Modification Required! Simple Screw In Design With No Cutting Drilling Or Alterations To Your Vehicle. Upgrade the look of your vehicle in under one minute..
  • SUPPORT CAR WASH | Solidly Built antennas do not bend or break during a car wash, short and stylish antennas also do not need to be removed.
Check Stock

aftid - 4 Inch Aluminum Stubby Antenna Compatible with Dodge RAM Trucks 1500 | 2500 | 3500 | 1994-2023

  • REPLACE FOR YOUR VEHICLE ACCESORIESS | Add a stylish and modern style short antenna (4 in) to replacement available for your 1994-2023 Dodge RAM Trucks 1500 | 2500 | 3500.
  • 4 INCH BLACK Aluminum Antenna | This antenna is out of 7073 aluminum. 4 Inches long antenna has internal threads, exact match for your truck antenna. The finish is a hard black anodized that will last forever without fading or chipping.
  • MODERN LOOKING | The mini antenna has stylish screw-on antenna intended can improve the look of your vehicle. This stubby antenna doesn't affect any satellite services such as On-Star GPS or Radio..
  • CONVENIENT INSTALLATION | Only Takes A Few Minutes, No Modification Required! Simple Screw In Design With No Cutting Drilling Or Alterations To Your Vehicle. Upgrade the look of your vehicle in under one minute..
  • SUPPORT CAR WASH | Solidly Built antennas do not bend or break during a car wash, short and stylish antennas also do not need to be removed.
Check Stock

Larsen - 3/4' Hole Mount Antenna with 0-6 GHz Frequency No Connector

  • The mount is a "trunk lid" mount with 13'/about 4m RG-58U cable. This requires a small (typically 3/8" to 3/4" ) hole be drilled through the surface hosting the mount, and is the best choice for an extremely rugged installation..
  • L-Bracket Hole Stainless Steel 3/4" NMO Hole Mount, L Bracket for HYS TCJ-N1 Coax NMO Mount Cable Mobile Antennas Car Truck Hood install. Stainless Steel L-bracket for Trunk Groove Or Side Mounting..
  • Recommended HYS NMO Antenna: NMO Antenna TC-HC152V (136-174Mhz,B077HRNLHZ), TC-HC152U (400-470Mhz, B077HXNJ1F ) or HYS SDN1(144/430Mhz, B07P71M8M5), easy install and match perfectly..
  • Prefect for mobile FM transceiver NMO antennas. NMO to PL259 working for so239/uhf female Motorola Yaesu/Vertex Kenwood HYT Icom radio, the clip need a NMO HF/UHF/VHF/CB Antenna..
  • This is a high quality, low profile base mount that does the job very well. 13 feet NMO cable connected easily with the antenna and there is plenty of cable to reach an antenna mounted practically anywhere on your vehicle/car..
Check Stock

onelinkmore BNC to UHF Antenna Adapter BNC Female to UHF Male PL259 Connector Coaxial BNC UHF Radio Adapter for Antennas LAN Device Radios Mobile Kenwood Radio Amateur Scanner SWL Operator Pack of 2

  • Application for BNC Antennas, Wireless LAN Devices , Coaxial cable, Wi-Fi Radios External Antenna,Can be used for connecting a BNC male cable to SO-239 jack female such as a radio or an antenna.
  • This UHF to BNC adapter provide a simple way to put the SWR meter with SO239 Ports in-line in your car without changing your setup.
  • Compatible with Vehicle CB Radio Amaterur Radio Ham Radio Marine VHF Radio Antenna Analyzer.
  • Package Content : 2 x BNC to UHF Connector RF Adapter.
Check Stock

Cable Matters 2-Pack SMA Male to UHF SO-239 Female Cable 1 ft in Black (SMA to UHF SO-239 Cable, SO239 to SMA/UHF to SMA Coaxial RF Cable)

  • Expand your radio equipment with the Cable Matters SMA to UHF Cable.
  • SMA to UHF adapter cable connects to radio equipment and antennas with SMA and SO-239 connectors.
  • SDR antenna cable enables a USB radio dongle to connect to antennas using UHF coax connectors.
  • Compatible with RTL-SDR dongle and adapters.
  • Radio antenna cable adapter enables flexibility and increases your antenna choices.
  • Ham radio antenna adapter cable connects radio equipment to standard UHF antenna adapter.
  • High quality UHF adapter cable features a 50 Ohm impedance rating for optimal performance and supports a frequency range of 0-6GHz.
  • Ideal for use as a radio antenna adapter, radio astronomy adapter, and other uses requiring high-frequency signals.
Check Stock

KSaAuto Antenna for Ford F150 Dodge Ram 1500 2009-2023, Dodge Ram 1500 Antenna, Short Ford F150 Antenna Replacement, 6.5 Inch Car AM FM Radio Ford F150 Accessories, Truck Dodge Ram 1500 Accessories

  • 【Vehicle Fitment】-The car antenna fits for 2009-2023 Dodge RAM 1500 and Ford F150 Super Duty include Ford Raptor Trucks, 2019-2022 Ford Bronco, 2017-2022 Ford F250 Ford F350, 2008-2012 Ford Escape..
  • 【Strong Reception】 - KSaAuto short f150 truck antenna replacement is designed for optimized car radio AM FM reception and does not affect the use of GPS and other devices. The copper coil made the radio antenna perform better in reception than other low profile antennas. You can enjoy clear reception from a lot of local radio stations..
  • 【Premium Material】-Chilean copper core and Thai rubber make the KSaAuto dodge ram 1500 antenna long-term use on the basis of high-quality signal reception, reducing damage and loss caused by bad weather and car wash..
  • 【Easy Installation】-KSaAuto Car Audio & Video Antenna is designed according to the factory original vehicle antenna base. A screw is included, replace new antenna in 30 seconds without any tools..
  • 【After-sales service】 If you have any questions about this ford f150 accessories antenna, please feel free to click "KSaAuto" under the "Buy Now" button, and then click "Ask" for help. We use Amazon's warehouse, so returns and exchanges are very convenient..
Check Stock