Reviews Car Fuse Holders

Bussmann CBC-35B Circuit Breaker (Type I Heavy Duty Automotive with Stud Terminals and Bracket - 35 A), 1 Pack

  • ★ Specification--- Car Audio Fuse Holders Voltage 12-24V DC, Ampere 20A 30A 40A 50A 60A 80A 100A.
  • ★ Characteristic--- Two modes, Current overload disconnection and manual disconnection, After the circuit is repaired, the switch turns ON and the fuse holder can be used again..
  • ★ Features--- Always protect the safety of automotive electronics, Prevent car currents from being too high and damage automotive electronic equipment.
  • ★ Quality control--- Car Audio Fuse Holders 100% Pass professional electrical performance test and aging test, the switch button has passed 100% full inspection, the switch button is smooth, there is no stuck state, please rest assured to buy.
  • ★ Worry-free Warranty --- An easy replacement or full refund is available for you if you are not happy with our product. Click to contact seller STETION, We will refund you or exchange it for free.
Check Stock

ASI PTF-76-10, 5 x 20 mm PCB Fuse Holder for Printed Circuit Board Mount, 15 mm Pin Spacing, No Center Pin, 10 Amp, 250V, UL (Pack of 10)

  • 【12v Inline fuse holder for standard blade fuses 】-Fuses holder kit including 12PCS 14 AWG inline fuse holders with 60PCS standard car fuses (2A,3A,5A, 7.5A)X5PCS+(10A,15A,20A,30A)X10PCS . The auto fuse size:19mm x 5mm x 18.5mm.14 Gauge Waterproof Pigtail In-line Fuse Holder can support fuses rating of 1A 2A 3A 4A 5A 7.5A 10A 15A 20A ATC/ATO blade fuse..
  • 【Good Conductivity&High-Temperature Resistance】-The Standard blade fuse holder made of tinned copper as a conductor to ensure good bending performance, refractory resistance and excellent electrical conductivity.Heavy duty 14AWG red power wire suitable for cars, trucks, Jeeps, boats，marine ATVs, UTVs, SUVs, etc. Adding circuit protection for car alarms,car recorder, GPS, dashboard camera, VCD player, etc..
  • 【waterproof rubber cap design】-This 14 Gauge heavy duty inline wiring harness with tight-fitting waterproof rubber cap,theses fuse link wire are not easy to fall off or enter water that can protect all standard blade fuse inside ,your car and electrical device from short circuit..
  • 【Inline Blade Fuse Holder Easy Installation】This 12V-DC ATC/ATO TC/ATO in line fuse holder has long enough wire loop Length.
  • automotive fuse holder loop length: 11.8 inches / 30cm.Firstly,cutting the inline....
Check Stock

STETION Car Audio 40 Amp Resettable Fuse Circuit Breaker Car Protect for Audio System Fuse 12-24V DC for Car Audio Amps Overload Protection Fuse (40A)

  • ★ Specification--- Car Audio Fuse Holders Voltage 12-24V DC, Ampere 20A 30A 40A 50A 60A 80A 100A.
  • ★ Characteristic--- Two modes, Current overload disconnection and manual disconnection, After the circuit is repaired, the switch turns ON and the fuse holder can be used again..
  • ★ Features--- Always protect the safety of automotive electronics, Prevent car currents from being too high and damage automotive electronic equipment.
  • ★ Quality control--- Car Audio Fuse Holders 100% Pass professional electrical performance test and aging test, the switch button has passed 100% full inspection, the switch button is smooth, there is no stuck state, please rest assured to buy.
  • ★ Worry-free Warranty --- An easy replacement or full refund is available for you if you are not happy with our product. Click to contact seller STETION, We will refund you or exchange it for free.
Check Stock

VANTRONIK Fuse Puller for Large and Medium Cylindrical Fuse Cartridge Fuse And Bulb, Insulated Non-slip Grip Handle, 7.2 Inch Long

  • Handy and convenient to remove or replace cylindrical fuses, such as glass fuse, ceramic fuse, and bulbs, Marine Boat Electric Fuse.
  • This puller safely and easily extracts fuses and bulbs from blocks and holders for home use, car, truck, marine and boat..
  • Made of insulated non-conductive high-grade ABS..
  • Serrated grip design to prevent slipping.Used for Large Glass tube fuse,Ceramic tube fuse,Cylindrical Fuse, Cartridge Fuse And Bulb, Midget Fuse. ....
Check Stock

14 Gauge Fuse Holder ATC/ATO SIM&NAT 10 Packs in-Line Automotive Blade Fuse Holder with 50PCS Standard Car Fuses 1A 2A 3A / 4A 5A 7.5A 10A 15A 20A 30A Automotive Replacement Fuses

  • Heavy Duty 14 AWG Fuse Holders, Protecting circuits and electrical equipment. Easy to add additional circuits for cars, CD players, fax machines and etc..
  • PREMIUM QUALITY: Fuse holders wiring harness select Tin plated copper as conductor to ensure its good bending performance, melting resistance and excellent electrical conductivity..
  • SUITABLE FUSES: Fits for 1A - 30A ATC/ATO blade fuse of 19.1 × 18.5 × 5.1 mm.
  • Waterproof cap of fuse holder: Unique design of dual slot tight-fitting waterproof lid to enhance moisture-proof, waterproof performance and dust proof..
  • Package included: 10 pack inline fuse holder + 50pcs car fuses sets ( 1A / 2A / 3A / 4A / 5A / 7.5A / 10A / 15A / 20A / 30A ) 5pcs each..
Check Stock

10 Gauge Fuse Holder ATC/ATO 4 Packs in-Line Automotive Blade Fuse Holder with 24PCS Standard Car Fuses 15A 20A 25A 30A 35A 40A Automotive Replacement Fuses

  • Heavy Duty 10 AWG Fuse Holders, Protecting circuits and electrical equipment. Easy to add additional circuits for cars, CD players, fax machines and etc..
  • Fuse holders wiring harness select Tin plated copper as conductor to ensure its good bending performance, melting resistance and excellent electrical conductivity..
  • Pretty waterproof for all-weather applications.Widely used in solar cell circuit,RVs, motorcycles, etc..
  • Waterproof cap of fuse holder: Unique design of dual slot tight-fitting waterproof lid to enhance moisture-proof, waterproof performance and dust proof..
  • Package included: 4 pack inline fuse holder + 24pcs car fuses sets ( 15A / 20A / 25A / 30A /35A / 40A) 4pcs each..
Check Stock

12 Gauge Fuse Holder ATC/ATO SIM&NAT 5 Packs in-Line Automotive Blade Fuse Holder with 65PCS Standard Car Fuses 1A 2A 3A 4A 5A 7.5A 10A 15A 20A 25A 30A 35A 40A Automotive Replacement Fuses

  • Heavy Duty 12 AWG Fuse Holders, Protecting circuits and electrical equipment. Easy to add additional circuits for cars, CD players, fax machines and....
  • PREMIUM QUALITY: Fuse holders wiring harness select Tin plated copper as conductor to ensure its good bending performance, melting resistance and....
  • SUITABLE FUSES: Fits for 1A - 40A ATC/ATO blade fuse of 19.1 × 18.5 × 5.1 mm.
  • Waterproof cap of fuse holder: Unique design of dual slot tight-fitting waterproof lid to enhance moisture-proof, waterproof performance and dust....
  • Package included: 5 pack inline fuse holder + 65pcs car fuses sets ( 1A / 2A / 3A / 4A / 5A / 7.5A / 10A / 15A / 20A / 25A / 30A /35A / 40A) 5pcs....
Check Stock

10 Gauge Fuse Holder ATC/ATO SIM&NAT 5 Packs In-Line Automotive Blade Fuse Holder with 65PCS Standard Car Fuses 1A 2A 3A 4A 5A 7.5A 10A 15A 20A 25A 30A 35A 40A Automotive Replacement Fuses

  • Heavy Duty 10 AWG Fuse Holders, Protecting circuits and electrical equipment. Easy to add additional circuits for cars, CD players, fax machines and....
  • PREMIUM QUALITY: Fuse holders wiring harness select Tin plated copper as conductor to ensure its good bending performance, melting resistance and....
  • SUITABLE FUSES: Fits for 1A - 40A ATC/ATO blade fuse of 19.1 × 18.5 × 5.1 mm.
  • Waterproof cap of fuse holder: Unique design of dual slot tight-fitting waterproof lid to enhance moisture-proof, waterproof performance and dust....
  • Package included: 5 pack inline fuse holder + 65pcs car fuses sets ( 1A / 2A / 3A / 4A / 5A / 7.5A / 10A / 15A / 20A / 25A / 30A /35A / 40A) 5pcs....
Check Stock

MulWark 2 Pack 10 Gauge Tinned Copper Marine Wire Waterproof IP67 Inline Fuse Holder Pigtail Blade Fuse Block Relay with 40AMP Automotive Fuses Set for Car Truck ATV Boat Motorbikes

  • PACKAGE INCLUDED: 2 x standard inline fuse holders and 2 x 40Amp standard blade fuse. Our car fuse can be easily identified by the white mark amp rating figures on the top and allows checking top pins for continuity.
  • SAFETY PROTECTION: The heavy-duty 10 gauge (AWG) tin-plated copper wire features an excellent oxidation resistance that adds protection to the circuit of your car alarms, GPS, car recorder, dashboard camera, VCD player, etc.
  • WATERPROOF DESIGN: The gauge fuse holder is equipped with a tight-fitting, waterproof rubber cap with IP67 waterproof rating for maximum prevention of water, dust, and dirt from getting in.
  • PREMIUM QUALITY WIRE: High-quality soft red pigtail silica gel wire makes it easier to strip than other materials. What’s more, the 30cm wire length ensures convenient installation on almost all kinds of automotive devices.
  • WIDE APPLICATION: Support ATC/ATO standard blade fuse of 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, 40A, easy to use and ideal for car truck, boats, RVs, ATVs, Jeeps, Motorcycles, and much more.
Check Stock

200 Amp Circuit Breaker, 0-8 Gauge Trolling Motor Car Stereo Audio Inline Fuse Block Holders Inverter, Switch for Automotive Rv Marine Boat Truck, 12-48 Volt DC Breaker with Hexagon Key Tool

  • ... car audio, low-voltage, and high-current electrical equipment from current overload damage. The 200 amp fuse block protects your trolling motor from electrical damage, prevents excessive current and stops power surges from damaging Amps.
  • 【Unique safety design】The 200 amp marine circuit breaker is Car Audio Fuse Holders 200% Pass professional electrical performance test and aging test, the 200 amp marine circuit breaker is Car Audio Fuse Holders 200% Pass professional electrical performance test and aging test, switch button is smooth, The dc circuit breaker is no stuck state. The dc circuit breake water resistant housing, protective stud insulator included, splash & dust Proof..
  • 【Specification】The dc circuit breake Voltage 12-48V DC, compatible with all 12V/24V Systems. Waterproof, Including Copper accessories, Ambient temperature: -32 ° c to 82 ° c (-25 ° f to 180 ° f) ..
  • 【Installation & Application】The dc 12v circuit breake is surface mount, mount on firewall or panel. Water resistant housing, protective stud insulator included. typically used in auxiliary or accessory circuits for boat, caravan,marine, winch, RV, tractor and ATV applications..
  • 【Package Include】200 amp circuit breaker with Hexagon Key tool make better the conductiv....
Check Stock

YUNPICAR Mini Blade Fuse Holder 18 AWG Waterproof Connector Inline Fuse Holder with 5A ATM Fuses,2 Pack

  • Standard ATS 5A Blade Fuse ,Protecting circuits and electrical equipment. Easy to add additional circuits fit for cars, CD players, fax machines and etc..
  • High-quality :Fuse holders wiring harness select Tin plated copper as conductor to ensure its good bending performance, melting resistance and excellent electrical conductivity..
  • Easy to use:Just directly plug to the existing fuse holder, 18 AWG 9.4in red pigtail wire allow you to cut and splice it into any project. Keep your car and electric device in a safe condition.
  • Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. To enhance moisture-proof and waterproof performance and NOT easy to fall off or let water in.
  • Package Included: 2 X Mini Blade Fuse Holder and 2 X 5A Mini Blade Fuse.
Check Stock

Baomain ATC-2 Grey ATO/ATC 2 Amp Fast-Acting Automotive Blade Fuses - 25 Pack

  • Fast-acting type fuses ideal for electronic devices.
  • Used with Blade Fuse Blocks ATO/ATC fuse holders.
  • Standard circuit protection device for automobiles and trucks.
Check Stock

Baomain ATC-1 Clear Green ATO / ATC 1 Amp Fast-Acting Automotive Blade Fuses - 25 Pack

  • Fast-acting type fuses ideal for electronic devices.
  • Used with Blade Fuse Blocks ATO/ATC fuse holders.
  • Standard circuit protection device for automobiles and trucks.
Check Stock