Reviews Car Exhaust Header

LIBERRWAY Exhaust Wrap Header Wrap Exhaust Heat Wrap for Exhaust Pipes Tap Kit for Car Motorcycle 2 Rolls of 2 x50ft with 20 Stainless Ties and Gloves

  • Premium Quality Exhaust Heat Wrap: LIBERRWAY exhaust wrap is made from pulverized lava rock. The header wrap reduces heat under hood up to 50% and....
  • Effective Exhaust Header Wrap: Withstands 1400℉ direct heat and 2000℉ intermittent heat. Stronger and more durable for improved thermal....
  • Functional Header Wrap: Extremely pliable for a tight and secure wrap. Improves horsepower performance and can be used on car exhaust header wrap,....
  • Easy to Install: Before installing, soak the header heat wrap in water so that the fiberglass will not flying about. Wear gloves to avoid itching.....
  • What You Get: 2 rolls of 2 in (width) x 50 ft (length) x 1/16 in (thickness) header exhaust wrap, 20 pcs 0.3 in (width) x 11.8 ft (length) 304....
Check Stock

Cuque Motorcycle Exhaust Mid-Pipe Middle Pipe Full Exhaust System Vent Middle Pipe Stainless Steel Vent Middle Tube for Honda MSX125 2013-2015

  • 【Applicable models】Exhaust Mid Header Pipe,The exhaust central pipe is designed according to the exhaust pipe structure of a specific model. It can perfectly replace AFRICA TWIN CRF1000L ADV 2016 ‑2019 and other series models. The performance is stable. Please confirm the model before buying, so as to bring you a good Use experience..
  • 【Durable material】Exhaust Header Tube,It is made of high-quality stainless steel with a tapered tube with a thickness of 1 mm/0.04 inch. It is heat-resistant, high-temperature resistant, sturdy and not easily deformed, and has strong durability..
  • 【Applicable models】Exhaust Mid Header Pipe,The exhaust central pipe is designed according to the exhaust pipe structure of a specific model. It can perfectly replace AFRICA TWIN CRF1000L ADV 2016 ‑2019 and other series models. The performance is stable. Please confirm the model before buying, so as to bring you a good Use experi....
Check Stock

Cobra 2\ Diameter Chrome Heat Shield 99-0165P

  • 2"X50' Titanium exhaust wrap with (pack of 15)11.8" Stainless Steel(304) Locking Ties.0.08" thickness.
  • Before installing, soak the header heat wrap in water so that the fiberglass will not flying about. Wear gloves to avoid itching. Wrap it around your exhaust pipe, using overlap to hold it in place and simply use stainless ties to secure the ends in place..
  • High resistance to abrasions, oil spills, temperatures and vibration breakdown..
  • The exhaust heat wrap tape can withstand 1800F direct/2500F radiant heat..
  • Car heat shield wrap can reduces heat under hood up to 50% and improving car and motorcycle performance.
Check Stock

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

  • Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)

  • 1-1/8 inch width x 1-1/2" height Stock Square Port.
  • Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

RED LAVA EXHAUST PIPE HEAT WRAP 2 x 50 MOTORCYCLE HEADER INSULATION

  • LEDAUT 2 Roll 2" x 50' Titanium Exhaust Heat Wrap Roll for Motorcycle Fiberglass Heat Shield Tape with Stainless Ties.
  • Before installing, soak the header heat wrap in water so that the fiberglass will not flying about. Wear gloves to avoid itching. Wrap it around your....
  • High resistance to abrasions, oil spills, temperatures and vibration breakdown..
  • The exhaust heat wrap tape can withstand 1800F direct/2500F radiant heat..
  • The thermal heat wrap reduces heat under hood up to 50% and improving car And motorcycle Performance.
Check Stock

LEDAUT 2"x 100'Titanium Exhaust Heat Wrap For Car & Motorcycle Exhaust Tape With Stainless Ties

  • 2"X 100' titanium exhaust wrap with 16 x 11.8" stainless steel(304) locking ties..
  • Before installing, soak the header heat wrap in water so that the fiberglass will not flying about. Wear gloves to avoid itching. Wrap it around your exhaust pipe, using overlap to hold it in place and simply use stainless ties to secure the ends in place..
  • Heat shield are highly resist to abrasions, oil spills, temperatures and vibration breakdown..
  • The exhaust heat wrap tape can withstand 1800F direct/2500F radiant heat..
  • The thermal heat wrap reduces heat under hood up to 50% and improve car and motorcycle performance.
Check Stock

Remflex 2032 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-1/4 inch width x 1-5/8 inch height Oval Port.
  • Chevy V8 -Small Block 262 - 400, 1-1/4" x 1-5/8" Oval Port, For Raised Weld Bead Headers , 2/Set.
  • additional sealing material is provided around the weld bead to provide a better seal.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

LEDAUT Exhaust Heat Wrap Heat Shield Sleeve Tape 2 x50 Black Motorcycle with Stainless Steel Zip Ties + 2in Hose Clamps

  • 1/16" x 2" x 50' Roll black fiberglass exhaust heat wrap wiht locking ties(pack of 15) + 2in Hose Clamps..
  • Fiberglass exhaust header wrap can create more horsepower and reduce under hood temperatures a realistic 50% ..
  • Durable, tight woven, easy heat shield insulation .Protect the hose of the engine system and also Protects drivers and mechanics from burns..
  • Read the instruction first when start to wrap it ,Wrap headers to protect plug wires,downpipes to increase velocity, motorcycle pipes to prevent leg....
  • Good for exhaust pipes insulation .Great improving car and motorcycle performance. High resistance to abrasions, oil spills, temperatures and....
Check Stock

BETTERCLOUD 16PCS 3 76mm 304 Stainless Steel DIY Custom Mandrel Exhaust Pipe Straight & Bend Kit

  • Made In the USA 3.00 inch X Pipe Universal These Are NOT Mandrel Bent.
  • Add an “X” pipe Kit to Create Dual Exhaust.
  • Kit includes Heavy 16 GAGE 3.00 DIA BY 11.00" inch About 55.00 Inches Long Assembled (4) 20.00" Long Pipes + 3.00 inch Header Collectors and Clamps.
  • Exhaust Cross Over X Pipe (Please measure to make sure this fits your Car or Truck) This is not a direct Replacement it is Aftermarket.
Check Stock

Pirate Mfg Chrome Header 6Pt Head 16Pc Bolt Kit Compatible with BB Chevy BBC V8 396-454

  • Dynatech header flanges are of the highest quality for a great start to your exhaust header.
  • 1/4 thick and CNC laser cut for a clean transition from the cylinder head port to the header tube.
  • This is made of mild steel for a strong long-lasting construction.
  • A great exhaust system starts at the beginning - the flange and gaskets.
  • A big Dynatech advantage is the wide selection of port matched flanges.
Check Stock