Reviews Car Casting Mould

4 Pack Tray Silicone Molds

  • ...u will receive: the package comes with 5 pieces of round coaster resin moulds, 5 pieces of square coaster resin moulds, 2 pieces of silicone coaster storage box mould in rectangle and round, sufficient quantities and proper combinations will satisfy your various DIY needs in daily life.
  • Quality material: these epoxy casting moulds are made of silicone material, they are lightweight, reliable and reusable, they can withstand temperature from minus 40 to 446 degrees Fahrenheit, you can use them for a long time, and they are non-toxic, safe and tasteless, easy to clean with warm soapy water.
  • Simple to use: our round and square resin moulds set has smooth interior, so they are easy to demould, you just need to put the required filler into the mould, wait a while until the resin is completely cured, and gently twist the mould to push it out without tearing easily, while maintaining the shape of the mould.
  • Size of products: the diameter of round craft resin coaster mould is approx. 9 cm/ 3.54 inches, the size of the square coaster silicone mould is approx. 9 x 9 cm/ 3.54 x 3.54 inches, the round coaster holder silicone mould measures about 4 x 10.5 cm/ 1.57 x 4.13 inches, and the size of rectangle coaster storage box silicone mould is approx. 4 x 7 x 10.5 cm/....
Check Stock

5 Pieces Maple Leaf Jewelry Resin Moulds Spice Silicone Mould and Lighter Protective Cover Epoxy Mould Set for DIY Crafts Resin Casting Candle Wax Soap Making Projects Supplies

  • What's included: the package contains 5 pieces resin casting moulds, including 1 piece maple leaf jewelry mould and 2 pieces (1 pair) spice grinder resin moulds and 2 pieces lighter protective cover resin moulds in two size, enough for you to apply and satisfy your various needs.
  • Nice material: these epoxy moulds are made of silicone, which are reliable and easy to release materials, and the mould is not easy to get deformed, washable, please pay attention to blending ratio when adjusting glue.
  • Dimension: the size of maple leaf jewelry mould is approx. 16 x 18 cm/ 6.3 x 7 inches, the diameter of spice grinder resin mould is approx. 6 cm/ 2.4 inches, the size of lighter protective cover resin mould is approx. 6.6 x 3.5 x 2.5 cm/ 2.6 x 1.4 x 0.98 inch and 5.2 x 3.5 x 2.5 cm/ 2 x 1.4 x 0.98 inch, proper sizes are simple for you to operate.
  • How to use: you just need to twist the silicone mould and release your items out of the mould after the resin is completely dry and solidified, no tearing while the mould maintains its shape, so convenient for your DIY crafts.
  • Design your styles: our epoxy casting moulds provide interesting DIY ways for you to make, you can add some dry flowers, sequins, powder or pigments of various colors into the resin mould, or add a ....
Check Stock

7 Pieces Silicone Resin Casting Moulds Set, Include 2 Universal Lighter Protective Cover Resin Mould Square Coaster Silicone Mould Spice Grinder Epoxy Mould for DIY Craft

  • Package quantity: package comes with 5 pieces silicone resin casting moulds, including 2 x universal lighter protective cover resin mould, 1 x square coaster silicone mould, 1 set of spice grinder epoxy mould, enough for you to make desired crafts.
  • Size detail: the universal lighter protective cover resin mould measures approx. 6.6 x 3.5 cm and 5.2 x 3.5 cm, the square mould is about 9.5 cm in diameter, and the grinder epoxy mould is about 6 cm in diameter, please allow a little error on the size due to manual measurement.
  • Durable material: these resin casting moulds are made of durable silicone material, not easy to break, durable to serve you for long time, and with smooth interiors, reducing the need to cut back and polish the finished resin crafts, easy to release after the resin is fully cured.
  • DIY you own craft: these epoxy DIY moulds are compatible with epoxy resin, wax, soap and other materials, add some sequins, resin dyes, dried flowers and other decors into the mould, to make practical coasters, cup mats, wall decorations, hanging ornaments, home table decors, art works and other DIY projects.
  • Nice gift choice: you can send our silicone resin moulds set to others who are DIY lovers as gifts, or send the finished products to your lover, friends....
Check Stock

Zevipe 6pcs Jewelry Wax Hole Tube Moulding Carving Wax Ring Casting Mold Wax

  • Length is 14.6 cm, 6PCS Include T100,T150,T200,T250,T1062,T1062E,.
  • Wax with Hole Can Be Carved / Shaped and Reproduced to Other Ring Mould.
  • The Size Details are in the Description,Wax Color Would Be Green or Blue.
  • Previous Quality Casting Wax Hole for Jewelry,If You Want Other Shape Carving Wax Ring Tube/Lost Wax Casting Kit/Wax Carving.Please Search In Our Store,We Also Have Solid Wax Tube.
  • Zevipe Manufactured this Wax Mould Tube in Wax Factory Which We Checked its Quality,Nice as Famous Brand Wax Ring Jewelry..for Casting Ring Mold.So We Choose it for You.
Check Stock

4 Pieces Graphite Ingot Mold Stir Rod Stick Set, 5-in-1 Graphite Casting Ingot Mold Coin Combo Metal Refining Scrap Mold, 1 KG Graphite Ingot Crucible Mould, 2 Graphite Stir Rod Stick for Melting

  • "What you get: this package includes 1 piece of 5-in-1 graphite casting ingot mold, 1 piece of 1 kg graphite ingot crucible mould, and 2 pieces of graphite stir rod sticks, totally 4 pieces in 1 package, convenient combination set to meet your DIY needs for melting casting refining metal jewelry gold silver".
  • "Size information: the 5-in-1 metal refining scrap mold measures about 72 x 57 x 12 mm, and the 1 kg crucible mould is 100 x 50 x 25 mm in outer diameter, and 90 x 40 x 20 mm in inner diameter.
  • Each crucible stir rod is about 12 inches/ 30 cm long, and 5/16 inch/ 0.8 cm in diameter, please check these sizes carefully before purchasing".
  • "Wide range of applications: these graphite ingot molds are suitable for experiments and smelting of non-ferrous metals, including gold, silver, copper, aluminum, and so on, which are designed for lab, test analysis and other purposes.
  • Considering the product size, it is more suitable for small-capacity metal melting projects".
  • "Product advantages: these graphite casting molds are featured with nice thermal stability and corrosion resistance to strong acid and alkali, fast cooling, nice thermal conductivity properties can highly shorten the casting time and save energy".
  • "Nice material: these melting casting molds ar....
Check Stock

Lyman Big Dipper Casting Kit 115-Volt

  • Essential items needed to start casting your own bullets.
  • Includes Big Dipper Furnace with 10 lb capacity.
  • Includes casting dipper, Ingot Mould, 3 different lubes and cast bullet guide.
Check Stock

4 Pieces Graphite Ingot Mould Crucible Ingot Casting Mould Silver 1 KG Gold Ingot Mould for Gold Silver Metal Aluminum Copper Brass Melting Casting Refining (90 x 40 x 20 mm)

  • Package comes with: you will receive 4 pieces of graphite ingot moulds in the package, the sufficient quantities for you can meet your DIY requirements in daily life.
  • Quality material: our casting ingot crucible moulds are mainly made of graphite material, almost no ash content to ensure that the metal refining process does not affect the purity of the metal, which are durable, sturdy, reliable and reusable, not easy to break or deform, you can use them for a long time.
  • Size detail: the outside dimension of our silver gold ingot mould is approx. 100 x 50 x 25 mm/ 3.94 x 1.97 x 0.98 inch and the inner size is approx. 90 x 40 x 20 mm/ 3.54 x 1.57 x 0.79 inch, and the capacity is about 1 kg gold or 500 g silver, proper size can meet your daily needs.
  • Good performance: our ingot crucible mould has good thermal conductivity, which can greatly shorten the melting time and save energy, and can withstand a temperature of 2000 degrees Celsius, good acid and impact resistance, good alkali resistance and corrosion resistance, 89 MPA compressive strength and 48.7 MPa flex resistance.
  • Various applications: this graphite casting mould has a wide range of applications, it is suitable for experiments and melting of non-ferrous metals, such as gold, silver, metal, alumin....
Check Stock

DIY Tray Resin Mould Craft Oval Creative Jewelry Making Mould Plate Dish Ashtray Mould for Resin Epoxy Mould Silicone Resin Casting Mould for Office Home Decoration Supplies Ideal Gift Oval

  • 【DIY Your Own Crafts】The resin mould is practical and can let your imagination run wild.Perfect for making craft projects making and jewellery DIY....
  • 【Reusable】Our oval resin casting mould are made of silicone with smooth surface, which can bring you nice effect of finished products, also....
  • 【Easy to Use and Clean】Non-stick, non-tear, easy to clean and demould. You just need to twist the silicone mould and release your creation out of....
  • 【Ideal Gift】Perfect for yourself, family members, friends or anyone who likes crafts project. Also you could design your unique handmade coaster....
  • 【Kindly Note】Please store the resin tray mould in room temperature place.
Check Stock

Bulk Iron Filings- 1 LB Iron Filings for Science Experiments, by American Heritage Industries

  • Perfect for Cold Casting: Our Artmolds very fine Iron powder is perfect for cold casting and helps to make the iron made DIYs for your home and offices.
  • Very Fine Iron Particles: Our Artmolds Iron powder comes with 1lbs (453.6 Grams) and 325- Mesh powder which is considered as very fine and odourless particle for the cold casting and moulding.
  • Very Easy And Simple To Use: Our Artmolds Iron powder is a very simple and easy cold casting formula using polyurethane resin. Just combine, mix well and pour into the mold.
  • Your Creativity Will Never Lose Shine: Are you afraid if your collection may lose shine in future? Don't panic. Our artmolds iron powder contains very fine particles of iron and the shine can retain by just polishing using rosin and polishing wheel.
  • Mould your Creativity Into a Shape: Try our Artmolds fine particle Iron powder at your home and office decors and enhance your creativity level and feel artistic.
Check Stock

ZHHOOHAG Resin Moulds Cobble Stone Wall Line Grain Shape Silicone Printing Texture Mat Resin Moulds Silicone

  • The surface of the mould is smooth, which can help the object to disengage from the mold quickly and ensure the integrity of its shapes..
  • Easy to use and clean put the filling into a mold and put it Then take mold out after a period of time, you just need to gently press on the bottom of the mould, the filling will jump out, not leaving a residue.
  • After using it, you can put it in the dishwasher or wash it by hand..
  • Multiple application the chocolate cake mold can be applied to making chocolates, soap, cake, bread, jelly, etc., making your food attractive and adding flavor to your food..
  • Reuseable DIY Molds Garden Planter Vase Ashtray Mould is Reusable, non-stick.
  • Easy use and clean. Flexible yet easy to maintaining shape in long run..
  • What Material Applicable Silicone Ice Shot Glass Molds compatible with most resins or other casting materials, can be used to as cement, plaster, concrete, plaster, soap, candle, polyester resin molding tool..
Check Stock

6 Pieces Rectangle Resin Silicone Mould Rectangle Tray Resin Mould Geometric Epoxy Casting Mould for Paperweight Dried Flower Interior Design Jewelry Coaster DIY Craft Soap Making 6 Sizes

  • Package content: this package includes 6 pieces rectangle resin silicone moulds, which are in 6 different sizes, allowing you to DIY different art....
  • Applicable usages: the rectangle tray resin moulds are capable of paperweight, terrarium necklace pendant, crystal block, preserved flower, interior....
  • Multiple sizes: our geometric epoxy casting mould set has 6 sizes which are large and deep enough to embed real dried flowers or plant specimen for....
  • Flexible and durable: the resin silicone mould with good transparency are made of flexible and durable silicone, which keeps the shape well, designed....
  • Easy to use: just put fillings you want into the mould and set it for a period, after hardening, simply bend the moulds, lightly pop out the finished....
Check Stock

Woohome Wind Chimes Resin Mould Resin Kit Wind Chimes Epoxy Resin Molds with Craft Supplies for Create Art DIY Wind-Bell Decorations Home Decor

  • Beautiful gift: The wind chimes shook with a clear and sweet sound under the wind, which brings people a happy mood. It is very suitable as a gift to your family and friends at Christmas, Thanksgiving, Valentine's Day and birthday parties,send your most sincere blessings, and spend a sweet time together..
  • Package includes: 1 set DIY wind chime resin mould, 1 roll crystal string rope, 5 PCS rose red wind chime pole, 5 PCS blue wind chime pole, 5 PCS purple wind chime pole..
  • Premium material: The wind chime epoxy mould is made of high quality silicone, which is durable, soft. Smooth interior makes it easy to de-mold after it’s fully cured and reduces the need to cut back and polish..
  • Creative DIY: Our resin casting molds can be made in different styles, you can add dry flower, pearl pigment, glitter and sequins or other small items into the resin mould to get a colorful mould. So feel free to use your imagination and add your own unique style to them!.
  • Widely used: The wind chime mold can be used not only as a wind chime but also as an ornament such as earrings, necklaces, and mobile phone pendants..
Check Stock

Cestony 3D Simple Tree of Life Candle Silicone Molds for Making Candle Resin Pillar Aromatherapy gypsum Candles Wax Soap Flower Specimen Clay Craft

  • High Quality Material: Our silicone molds for epoxy resin are made of high-quality silicone material that is foldable, flexible, smooth, handy to demold, hard to deform, washable..
  • Widely Used: Our molds can not only make candles, but also ice, soap, polymer clay, small animals and small plant specimens. You can also add pigments, mica, paint, glitter to the resin to make beautiful home decorations..
  • Easy to Demould:Our silicone moulds are simple to release, after resin in the mould is shaped and fully solidified, just press the bottom of the mould and release your creation, and there is no need of cutting or edging, you will get a delicate craft..
  • Instructions: Step 1, pour casting material into the mold and slowly stir, wait until the material is fully solidified.
  • Step 2, twist mold and release your craft, you will get a craft with nice shape and glossy surface.
  • Step 3, after using, just wash and store the mold for next time..
  • Ideal Gift Choice: You can share the DIY casting moulds with your friends or family members who are DIY lovers, to enjoy the handmade fun together, or you can send the finished products made by yourself to the people you want as adorable gift.
Check Stock