Reviews Car Brake Line

CNC Mountain Bike V Brake Set, Bicycle V Brake for Front/Rear

  • You will get: 2 pairs mountain bike brakes with the brake pads fit for most bicycle, road bike, etc..
  • 2 Pieces barrel ended brake cables (2 m in length), 2 pieces cable end caps and 6 pieces end ferrules.
  • Product dimensions: the bike brakes in arch size is 110 mm (4.3 inches), brake pad is 55 mm (2.1 inches), barrel ended brake cables are 2 m in length.
  • Durable material: this bike brakes set is made of alloy and plastic, strong and durable enough for using long time, meet your needs.
  • How to install: 1. screw the fixing hole of the brake corresponding to the body fixing hole.
  • 2. Pass the brake wire through the brake wire tube in sequence, and fix the position of the metal wire tube.
  • 3. Fix the brake line on the bolt, then install the brake leather, adjust the distance, position and length of the brake line, and then fix the brake line firmly.
  • Wide applications: this bike brakes set fits for most bicycles, road bikes, MTB, BMX.
  • Warm note: you need to confirm whether the rear wheel of your car has the mounting hole of this type of brake, please be careful to purchase.
Check Stock

ABN Professional Brake Line Flaring Tool Kit 45 Degrees - Single Bubble Double Flare Tool Kit for Steel Copper Tube

  • [Get a Leakproof Connection]: When building car brake lines, the ABN Professional Brake Flaring Tool Kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises.
  • [Fits Your Application]: 45-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
  • For 3/16-inch (4.75mm), 1/4-inch (6.35mm), 5/16-inch (8mm), and 3/8-inch tubing.
  • [Use Your Vise]: Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under car).
  • 6-inch (15.2 cm) T-handle screw clamp holds die and tube in place so you can create flares quickly and easily.
  • [Durability You Need]: Deburred square pipe end with outer edge chamfered approximately 0.25 x 45 degrees.
  • Each die block is 1.7 inches (4.3 cm) long.
  • Approximate 1.5-inch (3.8 cm) actual clamping surface [we recommend only placing bends in the last 2.5 inches (6.4 cm) of tube after flared].
  • [Package Contents]: Brake line flare kit includes (1) brake line flare tool with T-handle and 11-inch lever with 5-inch texturized rubber sleeve (27.9x12.7 cm), (4) end dies, (1) instruction manual, and (1) 14.1 x 6.1....
Check Stock

KIMISS Line Lock Manual Brake Lock Hydraulic Brake Park Lock Pressure Holder for Cars Trucks

  • 【Brand & New】100% brand new brake lock line lock, hydraulic brake park lock pressure holder,direcct replacement for your old one..
  • 【Main Useage】This Line Lock Manual Brake Lock Hydraulic Brake Park Lock using hydraulic line pressure hold your brakes.help you modify your car..
  • 【High Accuracy & Stable Performance】Professional manufacturing, Come with high accuracy and stable performance..
  • 【Extra sealing ring】Come with one extra sealing ring for replacement.We offer 24 months warranty and 30 days money back guarantee for all KIMISS products, and we are fully responsible for all product problems. If you have any problems, do not hesitate to contact us..
  • 【Universal Fitment】Universal Fit for cars, trucks, Disc or Drum brakes.widely used for replacement..
Check Stock

2 Pairs Bike Brakes Set Universal Bike Brakes Mountain Bike Replacement for Most Bicycle and 2 Pieces Mountain Bike Brake Cables Bike Gear Shift Cable Wire, End Caps, End Ferrules (Black)

  • You will get: 2 pairs mountain bike brakes with the brake pads fit for most bicycle, road bike, etc..
  • 2 Pieces barrel ended brake cables (2 m in length), 2 pieces cable end caps and 6 pieces end ferrules.
  • Product dimensions: the bike brakes in arch size is 110 mm (4.3 inches), brake pad is 55 mm (2.1 inches), barrel ended brake cables are 2 m in length.
  • Durable material: this bike brakes set is made of alloy and plastic, strong and durable enough for using long time, meet your needs.
  • How to install: 1. screw the fixing hole of the brake corresponding to the body fixing hole.
  • 2. Pass the brake wire through the brake wire tube in sequence, and fix the position of the metal wire tube.
  • 3. Fix the brake line on the bolt, then install the brake leather, adjust the distance, position and length of the brake line, and then fix the brake line firmly.
  • Wide applications: this bike brakes set fits for most bicycles, road bikes, MTB, BMX.
  • Warm note: you need to confirm whether the rear wheel of your car has the mounting hole of this type of brake, please be careful to purchase.
Check Stock

VEVOR Brake Line Flaring Tool, 37 & 45 Degree Single, Double, and Bubble Flares for 3/16', 1/4', 5/16' and 3/8' Tube Size, Suitable for Soft Metal of Copper Lines

  • Four Tube Expanding Size: This brake line flaring tool includes 4 dies in the following sizes: 3/16 inch (4.75mm), 1/4 inch (6.35mm), 5/16 inch (8 mm), 3/8 inch (9.5 mm). It creates 37° and 45° single, double, and bubble brake flares in seconds. Reduce the friction on flares to ensure your vehicle operates at optimal performance..
  • Applicable Materials: This double flare brake tool is suitable for expanding copper and aluminum piping. It is an excellent tool for repairs on vehicles or taking lines off of a vehicle. Whether you're working on brake lines, transmission cooler lines, or fuel lines, our flaring tool will help you create the flares you need quickly and easily..
  • Leakproof Connection: With the turret-style design, the professional brake line flaring tool keeps all your dies ready. They are available and within immediate reach with the convenient turret carrier, greatly saving you the hassle of fumbling for small parts or losing them..
  • Vise-Mounted: The brake line flare tool is compatible with a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under a car). The 6.3-inch (16 cm) T-handle screw clamp can hold the die and tube in place firmly without vibration. After repairing, your vehicle will be ....
Check Stock

1068 Extended Front/Rear Brake Lines Fit for ATV Polaris RZR 800/S 800/4 800/XP 900/570/XP 4 900

  • 【Application】For Polaris RZR 800 : 2008+, for Polaris RZR S 800 : 2009+, for Polaris RZR 4 800 : 2010+, for Polaris RZR XP 900 : 2011+, for....
  • 【Function】Perfect to replace or upgrade your inventory line. Make your car work more coordinated..
  • 【Material】We created and engineered this kit using top quality steel for professional level reliability and durability..
  • 【Package includes】1×Extended Length Front Brake Line and 1×Extended Length Rear Brake Line..
  • 【100% Satisfaction Guarantee】Yoursme committed to providing customers with a good product experience, if you are not satisfied with our products,....
Check Stock

Bike Brake Cable Housing Kit Includes 1 Set Bicycle Brake Line 2 Pieces V Bike Brake Noodle Cable Guide Pipe and 2 Pieces Plastic Hoses for Road Mountain Bicycle Cycling Black Brake Line

  • What you receive: comes with 1 piece bicycle brake line set (includes 1 piece 5 mm brake line 2.5 m, 1 piece general front brake internal line 1.1 m, 1 x general rear brake internal line 1.7 m, 6 x brake line cap, 2 pieces thread tube S buckles, 2 pieces inside tail cap, 1 piece inside O ring, 5 pieces C-clip ) and 2 pieces V bicycle brake noodles cable set (includes 2 pieces V bike brake noodle cable guide pipe and 2 pieces plastic hoses).
  • Bicycle brake line set: strong cable for more braking power and smooth operation, long length and various head to fit mountain bike, road bike.
  • V Bicycle brake noodles cable set: included 2 pieces aluminium alloy V bike brake noodle cable guide pipe and 2 plastic hoses hose, made of rubber tube with a plastic pipe, reduce friction brake line, effectively protect the brake line, reduce brake line resistance, they are suitable for V bicycle brake repairing.
  • Durable and sturdy: this bicycle riding set is made of quality material, each replacement part has been well made, reliable and durable, can be applied for a long time.
  • Wide application: this bicycle brake cable housing kit is suitable for both mountain bikes and road bikes, contains everything you need to replace your existing ....
Check Stock

MOSNAI Club Car Golf Cart Brake Drums/Hub & Brake Shoes Spring Kit Fit Club Car DS 1995-Up&Precedent 2004-Up

  • ✅Fit Models: Club Car brake shoes and drums kit fit Club Car DS 1995-up gas & electric golf cart and Precedent 2004-up gas & electric golf cart models..
  • ✅Club Car Brake Shoes Spring Kit: Replaces OEM # 1018163-01,1011466, After Market # 4324, 4333, 5162, 5219..
  • ✅Upgraded Club Car Brake Shoes Pads: Includes 4 PCS Club Car brake shoes which are 2 short -17T and 2 long-17L, replaces OEM# 1018232-01. You don't need to worry about the brake issues or fracture problem..
  • ✅Club Car DS Brake Drum: Replace OEM #1017911-01, the brake drum in this kit does NOT have the center hole, it will NOT fit older Club Car golf cart..
  • ✅Package Include: Our Club Car brake drum set can be installed easily. 4 x Club Car brake shoes (2 short, 2 long), 2 x Club Car brake drums and 2 x sets club car brake shoes spring kits for one complete cart..
Check Stock

OEMTOOLS 25440 Professional Tube Bending Pliers Bends Brass Copper Steel and Aluminum Brake Lines of Diameters 5/16 3/8 3/16 and 1/4 Steel

  • BRAKE LINE BENDER: This tube bender is ideal for working on brake lines.
  • Brake line bending tool is designed to bend brass, copper, steel, and aluminum brake lines.
  • Tubing benders can make left, right, and offset bends up to 90-degree angles.
  • DUAL-SIZED ADAPTERS: The brake tube bender comes with two dual-sized adapters for different sizes of brake line diameters.
  • Pipe bender tool works on 1/4 inch, 5/16 inch, 3/16 inch, and 3/8 inch diameters of mild steel and soft tube material.
  • MINIMIZES DAMAGE: Our brake line tube bender features forged separators with knife edges to minimize damage to parts.
  • Safe soft copper tubing bender and metal tubing bender for any brake line kit.
  • Excellent tubing pliers for mild steel pipes and tubes.
  • HEAVY DUTY MATERIAL: These tubing bender pliers are made of alloy steel for additional strength and durability, ensuring these brake line forming pliers last for years to come.
  • Sturdy manual tubing bender makes the job much easier.
  • BRAKE LINE PLIERS PRODUCT SPECIFICATIONS: Size: 10.5 Inches.
  • Two Dual-sized Adapters for 5/16, 3/8, 3/16, and 1/4 Inch Brake Line Diameters.
  • Left, Right, and Offset Bends Up to 90-degree Angles.
Check Stock

Seaboard Air Line Passenger Service: The Streamlined Era

  • Standard Saej844 Air Suspension Horn Train Lowrider Air Brake Tubing 1/4 Air Tube Air Suspension Line 1/4 Pneumatic Tubing.
  • Working Pressure 1mpa.150 Psi Burst Pressure 3 Mpa 435 Psi Working Temperature -40 ℃ ~ +60 ℃ Air Brake Tubing 1/4" Air Hose Nylon Brake Air Line Kit Nylon Brake Line 1/4 Dot Airline Tubing 1/4 Air Brake Line Pnumatic Hose.
  • Pa 12 Nylon Hose. Usage:air Brake System,air Or Fluid Transfer Use With Air Brake Hose 1/4 Dot Tubing.
  • Size:1/4".pipe Thickness 1mm Bending Radius 40mm Air Horn Tubing 1/4 In Air Line.
  • Weight 190gr/10meter.material Polyamide Air Bag Hose 1/4 Air Hose.
Check Stock

Titan 51535 3/16-Inch Double Flaring Tool

  • Set Contents: (1) 3/16-Inch Double Flaring Tool with Removable Handle, (1) Positioning Bolt, (1) Double Ended OP1/OP2 Punch, (1) Container of Die Lubricant.
  • Creates a perfect inverted 45-Degree SAE double flare with 3/16-inch steel and nickel-copper tubing. Not recommended for use on stainless steel tubing..
  • Can be used on the vehicle! Compact design can be used in tight under-car spaces allowing user to repair brake lines in place on the vehicle..
  • Handle can be removed if you prefer to use in a bench vise..
  • SAE Double Flare is an inverted 45-Degree flare typically used in automotive brake line applications. 3/16-Inch brake lines are on almost all cars and trucks making this flaring tool usable with most vehicles..
Check Stock

LEAPGOMAX Club Car Golf Cart Brake Drums/Hub&Brake Shoes Spring Kit Fit Club Car DS 1995-Up&Precedent 2004-Up, Golf Cart Brake Maintenance Kit OEM#101791101 1018232-01 101816301

  • ⛳【UNIVERSAL FIT】The golf cart brake drums and brake shoes kit fit for Club Car Precedent gas & electric (2004-up) golf carts and DS (1995-up) gas & electric models..
  • ⛳【Club Car Brake Drum/Hub】2 PCS Club Car replacing brake drum/hub will allow your golf cart to perform as intended. Replaces OEM Number(s): 1017911-01,10603..
  • ⛳【Club Car Brake Shoes】4 PCS self-adjusting (2 long and 2 short) golf cart brake shoes set for one Club Car DS or Precedent golf cart. Replaces OEM#1018232-01..
  • ⛳【Club Car Brake Shoes Spring Kit】12 PCS Club Car brake shoes spring Kit Included. Replaces OEM#101816301..
  • ⛳【Keep Safe】This golf cart brake shoes spring kit & brake drums maintenance kit good for improving your cart brake's performance. Replace worn or damaged parts to keeps your cart safe..
Check Stock

12 Pieces Brake Line Clips Metal Brake Line Retainer U Shaped Brake Hose Bracket Parking Brake Cable Clip Replacement Hose Retaining Clip Brake Hose Lock for Cars Trucks Vehicles Parts

  • Package you will get: the package includes 12 pieces of metal brake line clips, well made and reliable, enough for you to replace your old or rusted one and apply to where you need.
  • Meanwhile, you can share them with family, close friends, neighbors.
  • Quality material: these car brake hose locks are made of quality steel, coming from exquisite workmanship, sturdy and serviceable, resistant to rust and corrosion, will not deform or break when installing, also not easy to fall off, which can serve you for a long time, you can rest assured to use.
  • Easy to operate: this hose lock retainer clip is easy and convenient to install, you only need to attach the brake hose to a bracket connected to the steel brake line, saving you time and effort nicely.
  • Extensive applications: these replacement hose clamps have a wide range of applications to use, suitable for cars, trucks, SUVs, motorcycles and hoses with the appropriate size.
  • And they are portable and lightweight, nice for your storage and carry.
  • Size information: the brake hose retaining clip measures approx. 28 x 27 mm/ 1.10 x 1.06 inches (length and width), and the middle section is about 13 mm/ 0.51 inch, please make sure it is the size you need before purchasing.
Check Stock