Reviews Camera Arm For Desk

JUSMO Camera Desk Mount with Auxiliary Holding Arm, Overhead Camera Mount with 360° Ballhead and Phone Grip, Table C-Clamp Multi Mount Stand for DSLR, Phone, Light, Webcam and More

  • Desk mount stand 17.3-41.3 inch adjustable, gives you ample height for overhead shooting and lighting. And 14 inch auxiliary holding arm for cameras, lights, phone and More..
  • Desk mount stand and auxiliary holding arm all have standard 1/4 screw can be mounted for the most cameras and lights which have a 1/4” adapter. Comes with phone grip, 2.2-3.9 inch can work with most smartphones..
  • Secure more gear to your Desk mount stand. A single steel pole that clamps horizontally onto Desk mount stand, solid arm provides an auxiliary mounting point for a camera, light or smartphone and more..
  • The arm can be installed at the lower two sections of the main pole to ensure stability(Height up to 28.7 inch), can not be clamped to the top section. The arm optimal load-bearing 1KG(2.2lbs) and Max 1.5KG(3.3lbs), so heavier equipment can be mounted on the pole top, and lighter equipment on the arm for stability..
  • This camera&cellphone desktop overhead video stand suitable for baking, crafting, online lesson, document display, live stream broadcast, video recording, phone scanning and other scenes..
  • NOTE: It is recommended to adjust the your required height of the Desk mount stand before installing the Auxiliary holding arm. And if you need adjust the height of Desk moun....
Check Stock

DNSbabi Heavy Overhead Camera Desk Mount Stand, Top Down DSLR Photography Rig Holder, with Flexible Arm, 360Degree Rotatable Ball Head, Perfect for Your Home Studio11

  • Camera Desk Mount Stand: 31.5 inch center shaft height, No limit shooting from any angle or distance. Designed with ideal arm length, 27.5 inch super long extending arm, Three stages free adjustments, Single-arm load-bearing capacity is up to 11 lbs(5KG), Suitable for almost all cameras. The design with 360 ball head helps to adjust the angle. And desk clamp expandable up to 11cm/4.3 inch..
  • The clean functional design: It is sufficiently robust to handle a DSLR Camera, Webcam, Panel light, Ring light, Key light, Video camera etc. 360° Ballhead adjust to any angle and 1/4" Screw allows you to expand your rig. Save space, Work around a tripod in a small space is limiting, This eliminates the need for a tripod in you tiny studio..
  • Multipurpose/ Save space: Overhead camera rig has a lot of flexibility for phone/camera angles, Heights and locations. Overhead camera stands is easy to adjust and get what you want done. The camera arm desk mount also folds away into a minimal footprint and space. More than tall enough to clear any monitor you have..
  • Safe & Reliable: Aviation aluminum alloy material, Solidly made and well designed, Extremely sturdy and durable. Easily multiple directional, And the camera position can be moved with ease. You can mount other equi....
Check Stock

JEBUTU Overhead Camera Mount Desk Stand with 360° Adjustable Holding Arm, Flexible Phone Stand with 360° Ballhead and Phone Mount Holder, Boom Stand for Microphone, Video Light, Webcam, Cell Phone

  • 【What You Get】(1 x)C-Clamp / (1 x) Desktop Stand / (1 x) Holding Arm / (1 x) Holding Arm adapter / (1 x) Phone Holder / (1 x) 360° Ballhead..
  • 【Multiple Combinations】More chooses for you. With a desktop stand, you can put a lightweight camera on it.
  • With a holding arm, you can install a 360° Ballhead on it to get the best angle and connect with a lightweight ring light, fill light, Webcam as your need. The holding arm bottom has a 1/4'' hole to connect the desktop stand and get more high..
  • 【Adjustable】JEBUTU upgraded camera desk mount support with 360° Ballhead and holding arm adapter than you can adjust a suitable angle by it. Adjusted the adapter knob at the connect of the holding arm to adjust a perfect angle. Adjusted the adapter at the connect of the desktop stand to get a suitable height..
  • 【Upgraded Desk Mount Stand Parameters】The maximum opening of the C-Clamp is about 1.77inch/4.5cm, you can clip it on tables which thickness is less than the opening. The maximum length of the Holding Arm is 13inch/33cm. The height of the desktop stand can be adjusted from 12.79inch/32.5cm to 21.65inch/55c....
Check Stock

JUSMO Overhead Camera Mount Stand for Desk, Desktop Overhead Phone Mount Video Stand, Creating Top-Down Video/Photo, Heavy Duty Mic Boom Arm Microphone Stand and Cable Ties

  • Desk Overhead Camera Mount Stand have standard 1/4 screw can be mounted for the most cameras and webcams which have a 1/4” adapter. Comes with phone grip, 2.2-3.9 inch can work with most smartphones..
  • Microphone Arm Stand also has 5/8 and 3/8 connector compatible with almost all microphones like Blue Yeti, Blue Snowball, AT2020, AT2020USB+, AT2035, ATR2500-USB, ATR2100-USB, etc..
  • Built-in Springs and Improved Load-bearing Boom Arm: Unlike the stand on the market that have knob getting in the way when folded together and have the springs structured outside. JUSMO Stand is upgraded with built-in springs to avoid such issue. Freeing you the concern of causing the spring deformed and loss of elacisity. Optimal load-bearing 1.5KG(3.3lbs) and Max 2KG(4.4lbs)..
  • Overhead Camera Mount Stand is flexible with 2 arm, each arm is 13.7inch and reach a max height 31.5inch extension.
  • The base joint can be rotatable, you can adjust the swing arm angle and height as your wish to meet your different application scenarios and save your space on desk. and 2.16 inch clip distance, compatible with most desk..
  • Desk overhead phone mount video stand is widely use in different applications like overhead video shots, make great baking crafting demo videos, live stream, online les....
Check Stock

Webcam Stand Camera Desk Stand, with Webcam Holder Flexible Clamp, Gooseneck Arm, for Logitech C925e,C922x,C930e,C922,C930,C920,C615,Brio, Amada

  • Widely Compatibility: the webcam mount with 1/4 inch Screw Thread,it can be compatible with Card camera, Action camera, Security camera, Logitech Webcam BRIO C920 C920S C922 C922x C925e C930 C930e and so on..
  • Non-slip Clip: Specially designed a sturdy clamp which has Soft Rubber Cushions to fasten the webcam stand for desk. adjusting the arm without any move and no scratches on the table..
  • Flexible Gooseneck Arm: 13.5inch strong and flexible gooseneck arm of this webcam mount not only holds your devices more firmly, but it is also easily adjusted to the height and angle that you can enjoy the most comfortable view..
  • Life Partner: this webcam holder has widely application in your life, it can be mounted on table/desk/bed and rotate any angle and height for working, recording, live streaming, meeting, photographing, online classes and so on..
  • After-sales Service: if you have any problem with this webcam arm please feel free to contact us anytime. This webcam stand Max load weight 0.5 kg (1.1 lb).
  • Not for heavy Camera and devices.The webcam will be more stable if you bend the tube as "S" to clamp on the desk when using the webcam stand..
Check Stock

DImotliyor Overhead Camera Mount Desk Stand, 3-Section Flexible Detachable Articulating Arm with 1/4“ 3/8" 5/8" Screw&360° Ball Head, C-clamp Tabletop Mount for DSLR Camera/Webcam/Microphone/Lights

  • 【3-Section Detachable Pole】Overhead camera desktop mounting, Comes with 1/4", 3/8", 5/8" screw, Phone holder and 360° Ball Head. The overhead camera mount arm takes up less desk space, the base can be rotated 360°, and Each rod can be adjusted 180° with Excellent flexibility. The combination of three rods can meet your shooting needs at any angle, for better shots and overhead lighting..
  • 【Sturdy & 7lb Load】The camera desk mount is made of high-end aluminum alloy material, High-precision CNC machining, Surface is sprayed and anodized, Firm seams, Which is durable. Can bear a load of 6.5lb/2.7kg in a horizontal state and a maximum load of 7.2lb/3.3kg, When suspended, Has amazing stability.
  • 【Flexible Design & Widely Used】Each pole has an angle adjustment point, and there are 1/4" screw holes at the bottom of the camera arm, You can connect desktop camera mounts and tripods at any interface. Can hold a full size DSLR camera/Webcam/Projector/Phone/Video light /Microphone etc devices, for Video recording, YouTube, Live streaming, Online lesson, Baking, Vlogging..
Check Stock

SUNMON Quadcast Mic Stand with Boom Arm Clamps For HyperX Quadcast Microphone

  • 【Perfect Boom Arm】- Suspension boom arm stand fit your HyperX QuadCast suitable, you can easily adjust the mic to the suitable angle or height to show your perfect voice..
  • 【Assembly clip】 - suitable for mic arm desk mount and wall-mounted installation, Adapt to different use environments. It can be used as desktop microphone holder clamp, architect lamp clamp, magnifier lamp clamp, camera holder clamp..
  • 【Wide range of application】 - the bracket socket is suitable for most support pipes of 11-13mm. It is installed on a horizontal table with a maximum clamping thickness of 2.75"/7cm. It is installed on a vertical side plate and the maximum clamping thickness is 1.57"/ 4cm..
  • 【Compatibility】 - Perfectly match most boom arm stand. Double-size thread is specially designed to fit US and EU microphone stand. Note: Not Included Mic Stand and HyperX Quadcast Microphone..
  • 【Refused to break】 - heavy metal desk clamp, professional desktop stress structure effectively remove the stress generated when pushing and pulling the mic desk arm, reducing the possibility of desk clamps breaking..
Check Stock

eWonLife Mic Boom Arm, Microphone Stand Desk Mount with 5/8 Thread, Heavy Duty Boom Mic Stand for Shure SM7B, Mv7, Blue Yeti, Hyperx Quadcast, With Filter, 5/8\ to 3/8\

  • ...educing its velocity to get good sound..
  • Wide Compatibility: The microphone desk arm stand is compatible with Blue Yeti, Blue Snowball, Shure Mv7, Sm7b, Hyperx Quadcast, Fifine and other mics. Come with 5/8” to 3/8” Adapter, it fit for european microphones. Come with 5/8” to 1/4” adapter, It fit for stand of camera, mobile phone ipad and so on..
Check Stock

Overhead Tripod for Camera, TOAZOE Heavy Duty Overhead Camera Mount with Flexible Articulating Boom Arm for DSLR iPhone, Desk Clamp Phone Video Stand for Live Streaming, Baking, Craft

  • 【Upgraded Overhead Camera Mount】This upgraded overhead tripod comes with a clip and phone holder for more flexibility and stability in use, it is built from aluminium metal with strong spring, designed to support some items up to 3.3lb..
  • 【Multi-angle Rotation】This dslr desk mount comes with 2 arms, each arm is 13.8 inch and reach a max height 31.6 inch extension, the bottom joint swivels 360°, very flexible so you can adjust the swing arm angle and height as you wish to meet your different scenarios like video recording, live streaming, and overhead shooting..
  • 【With 1/4 Thread Head】This boom arm camera has a universal 1/4-20 thread head, compatible with most smart phones, also compatible with slr, webcam, ring light, Gopro, projector and led video light..
  • 【Take up Less Space】This desk tripod comes with a metal clip with maximum thickness of 2 inches, the clip is made of aluminium, a soft EVA pad to protect the desktop surface, securely clamp on the table, kitchen counter, headboard, nightstand, workbench etc. The phone video stand can save your space on desk..
Check Stock

ULANZI Camera Desk Mount Stand with Flexible Arm Overhead Camera Mount Articulated Arm with 360° Rotatable Ball Head Aluminum Desk Mounting Stand for Ring Light/DSLR Camera/Webcam/Panel Light

  • Camera desk mount stand Up to 27.56 inch center shaft height ,no limit shooting from any angle or distance. 29.53 inch super long extending arm, three stages free adjustments,challenge and inspire your creativity..
  • Compatible with ring light, DSLR camera, video camera, panel light, key light, webcam, and more. also also also The Pole top has 1/4 screw hole, you can mount other equipment..
  • 360° Ballhead adjust to any angle and 1/4" Screw allows you to expand your rig. And padded desk clamp expandable up to 5cm/1.96 inch..
  • Aviation aluminum alloy material, extremely sturdy and durable, single-arm load-bearing capacity is up to 2KG(4.41lbs)--Suitable for almost all cameras..
  • This camera desktop overhead video stand suitable for baking, crafting, online lesson, document display, live stream broadcast, video recording and other creating top-down video/photo scenes..
Check Stock

Large Desk Clamp Mount Replacement for Microphone Suspension Boom Scissor Arm, Table C Clip for Desktop Overhead Camera Tripod Mic Stand Lamp Base, Fits Up to 2.36 inch 6cm Thickness

  • [ 2 in 1 Versatile ] This table mounting clamp has 2 tube hole, it makes both vertical and horizontal use for the boom arm, mount your arm stand to table, bed post, sideboard, headboard.
  • [ Bigger Clamp Design ] This big c clip can mount to up to 2.36 inch/ 6cm thickness tabletop, meet your more application.
  • [ Durable Metal Built] This boom arm base is made of hight quality metal which is durable and sturdy, heavy duty mount for camera arm.
  • [ Wide Compatibility ] The both tube insert hole diameter is 0.47inch/1.2cm, it is compatible with most microphone arm like Blue Yeti mic boom arm, hyperx quadcast boom arm, rode psa1 boom arm, overhead camera arm, overhead phone arm, overhead tablet arm, overhead light arm stand, desk lamp.
  • [ Soft Foam ] The soft rubber padding can protect contact point from any scratches..
Check Stock

IXTECH Mic Arm Premium Boom Arm 360° Rotatable Microphone Arm Mic Boom Arm with Desk Mount, Fully Adjustable, for Podcast, Video, Gaming, Radio, Studio, Recording, Sturdy and Universal VALIANT Model

  • Intelligent Stabilization System – Move your boom arm wherever you want while recording. It has the stabilization feature that you will not need to change the angle/position of your microphone, camera, phone, tablet etc. devices again..
  • Extra Height – Your 25.5 inch (64.77 cm) mic arm provides comfortable use with higher monitors thanks to the 5.9 inch (15 cm) length part..
  • Adjustable Broadcasting Mic Arm – Designed to help optimize your voice during podcasting, gaming, or streaming this microphone arm works on a desk at home or a podcasting studio with a 360° adjustable arm that rotates to your needs..
  • Clip-On Cable Management Holder – Each boom mic arm comes with a clip-on cable holder to help free up space and minimize the mess on your desk which creates a clean, professional look that also keeps your space clear of tangled wires..
  • Strong Dual Suspension Springs – Our desk microphone arm is designed with sturdy suspension springs that support up to 2.2 lb. (1kg.) of mic weight, so you can keep it from shaking, rattling, or moving during recordings for enhanced cl....
Check Stock

Magic Arm Camera Mounts Clamps w/ 1/4' and 3/8' Thread, 19.7” Adjustable Friction Power Articulating Arm with 2.6' Super Clamp for LCD Monitor/LED Light/Camera Video Rig/Smartphone

  • 【19.7" Magic Arm】 The long articulating arm camera mount clamp comes with a 19.7" adjustable friction hinged magic arm, with 1/4" screws at both ends, which can be installed with LCD monitor/LED light/ Video Vlog Rig through one end 1/4" screws. Meshing teeth design in the middle, provide more stability and security, easily tighten the joint of magic arm by turning the hi-torque screw. The extra-long magic arm can better meet your needs for length..
  • 【2Pcs Multifunction Super Clamps】The camera mounting clamp magic arm has two metal clamps: 2.16”/55mm (max) camera clamp with 1/4" and 3/8" threads, 2.56”/65mm (max) bidirectional (horizontal/vertical) metal table desk clamp. The camera mount clamps are made of lightweight aluminum alloy, which is more durable. The 2.16” super clamp with threads can be mounted virtually anywhere, such as cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps..
  • 【360° Rotation Ball Head】360° ball head articulating design adjusts any angles based on your needs. With 1/4" thread on both ends to install any on-camera flash lights, microphone, LCD monitor, DV Monitor, microphone on one end and other accessories like cage, NATO Rail 1973, 15mm Rod 1182 and Quick Releas....
Check Stock