Reviews Camera Appropriative Bracket

2 Sets for Raspberry PI Camera Module 5MP OV5647 1080P Video Webcam Sensor Infrared Night Vision Camera Module for Raspberry Pi B/B+ A+ RPi 4/3/ 2/1/ Zero/Zero W with FFC Cable Adjustable Focus

  • Camera parameters: the camera has a 5MP OV5647 1080P webcam sensor, featuring a high pixel of 5 megapixels.
  • The camera not only supports shooting 2592....
  • Compatibility: this high-definition video camera is compatible with Raspberry Pi model B/B+ A+ RPi 4/ 3/ 2/ 1 with the FFC cable and compatible with....
  • CMOS sensor interface: the camera module adopts appropriative CMOS sensor interface (CSI), via the CSI bus.
  • A higher bandwidth link that transmits 5....
  • Infrared fill light: the camera is equipped with 2 infrared fill lights to solve the problem that the light is too weak to take photos at night.
  • Focus adjustment: the focal length of the camera can be adjusted depending on the distance of the shooting object, which is helpful for you to capture....
Check Stock

2 Sets for Raspberry PI Camera 1080P Webcam 5MP OV5647 Sensor Day and Night Vision IR-Cut Video Camera Focus Adjustment for Raspberry Pi RPi 4 3 B B+ 2B 3A+ 2 1 Camera

  • Nice performance: the IR-Cut video camera not only supports shooting 2592 x 1944 pixel static image but also supports recording [email protected], [email protected] and 640 x 480p 60/90 video.
  • Featuring with 1080P 5MP OV5647 webcam sensor, 5 megapixels and adjustable focal length.
  • IR-CUT camera: the camera module has day mode and night mode, it can switch automatically between the 2 modes according to the change of light, which helps you to avoide image deviation and get clearer images during the day and night.
  • CMOS sensor interface: the camera module adopts appropriative CMOS sensor interface (CSI), via the CSI bus.
  • A higher bandwidth link that transmits 5 megapixels data from the camera back to the processor.
  • Compatibility: these infrared night vision camera modules are compatible with Raspberry Pi 4/ 3/ 2/ 1 model B/ B +/ a + (except Pi Zero/ Zero W).
  • Infrared fill light: equipped with 2 infrared fill lights, so the camera module allows you to take pictures at night and you don't have to worry about the light.
  • The brightness of infrared light will adjust automatically based on the dark of the circumstances.
Check Stock

Universal Car Rear View Camera License Plate Bracket,Dash Cam Mirror Camera Kit Accessories Rearview Camera Mount, Only Installation Holder for Backup Camera Reverse Camera

  • ▶This rear view camera bracket generally fit the rear cameras included in dash cam kit. Replace the small mount with license plate mount, easier to install..
  • ▶The distance between the two screw holes of this back up camera bracket is 13mm, please confirm the distance between the two screw holes of your reversing camera is 13mm as well..
  • ▶This bracket mount is rear view camera accessory, this backup camera license plate mount includes license plate bracket, rearview camera holder and installing screws..
  • ▶This is a universal rear camera bracket, you just need to make sure that the distance between the two screw holes of your rear camera is 13mm, then buy it with confidence..
  • ▶This rear view camera bracket can be only applied to US car license plates. Please note that do not install your backup camera upside down, you should test picture before installing..
Check Stock

Wooden Camera Vertical Camera Bracket, L-Shaped with 1/4-20 and 3/8-16 Threaded Holes, Made of Durable CNC Machined Aluminum, for Heavy Camera Setups

  • Vertical L-Shaped Camera Bracket: Attaches to tripod plates, camera bodies and ARRI dovetails in a vertical position. This bracket can accommodate even the heaviest camera packages.
  • Horizontal and Vertical Plates: This camera bracket has 1/4-20 and 3/8-16 threaded mounting holes plus pass-through slots for cabling on both the horizontal and vertical plates.
  • Durable Aluminum: Made of durable, CNC machined aluminum. This ultra-durable material guarantees the super steady and firm position of your device when attached to the bracket.
  • Mount Heavy-Duty Camera Gear: Use this L-shaped Vertical Camera Bracket to mount your heavy-duty camera gear. For smaller camera setups, consider the Mini Vertical Camera Bracket.
  • Includes: 2 x 1/4"-20 low-profile screws and 2 x 3/8"-16 low-profile screws. Weight 1960g (4.11 lbs), Dimensions 247.7 x 247.8 x 247.7 mm (9.75 x 6 x 9.75 in).
Check Stock

UTEBIT Flash Light Bracket 12in Upgraded Straight Speedlite Extension Mount Bar with 1/4 Screw Hot Shoe Tripod DSLR Holder for LED Light Microphone

  • 【Size and Material】 The length of the straight flash Bracket is 30.3cm/11.8in. Compared with similar regular products, this camera bracket is longer, flash extension bracket made of aluminum alloy, sturdy and durable, with strong load-bearing capacity..
  • 【Ingenious design】There are standard 1/4-inch and 3/8-inch screw holes in the middle of the dual flash bracket, which can be installed on a camera or a light stand..
  • 【Easy to carry】 The size of the dual camera mount is convenient to carry, suitable for use in various occasions, and is an indispensable important equipment for photographers..
  • 【Advantage】Compared with other similar dual camera mount that can only install one camera and one flash, our dual flash bracket can install two cameras and two flashes (or two other photography accessories) at the same time, ensure balance to meet different shooting needs..
  • 【Application】 Flash bracket meets the needs of multi-functional expansion, suitable for dual camera shooting, or match with video lights, fill lights, microphones etc at the same time..
Check Stock

Wyze Cam Pan Mounting Kit, 15 Foot Micro USB Cable Included

  • COMPATIBILITY: Wall Mount for Wyze Cam V3 & Wyze Cam V2 & Wyze Cam Spotlight, provides better viewing angle for Wyze Cam camera. Note: Wyze Camera is not included, bracket not included..
  • TWO INSTALLATION METHODS: The Wyze wall holder can be installed with 3M stick on or wall screws. It is very easy to install with 3M tape strong adhesive, no tools needed, no messy, no drilling. Another installation methods-wall screws holder are installed more firmly and the wall can be used wider range..
  • PLUG-IN DESIGN: The wall holder adopts a plug-in design, which is easier to install and not damage the camera. The Wyze camera only needs to be inserted into the bracket, no screws, no mess install, and will not affect the 360 -degree rotation of the camera..
  • SPECIAL DESIGN: The Wyze Cam V3 mount is designed with a slider auxiliary board. When the auxiliary board is removed, it is the Wyze Cam V2 bracket, providing a suitable choice for your Wyze Cam Camera..
  • Wide Applicability: The Wyze Camera bracket can be installed on glass, wall, cabinet, ceiling and any other place, including paint, outdoor, etc. Note: 3M tape cannot be installed on dirty, uneven and flat surfaces with water..
Check Stock

Backup Camera License Plate Bracket, Alpha Rider Universal Car Dash Cam Mirror Camera Kit, Rear Reverse License Plate Camera Mount Kit, Rear View Camera License Plate Holder

  • 【No Drilling & Easy Installation】 The Backup Camera License Plate Bracket usually fits the rear camera included in the dash cam kit. The license plate bracket replaces the small bracket. No drilling required, quick and easy installation..
  • 【Broad Application】 This is a universal rear camera mount for all cars with a distance of 0.51inch (13mm) between the two screw holes for the rear camera..
  • 【Easy Adjustment 120°】 Providing an ideal mounting point for the rear camera, it allows you to adjust the backup camera to the proper angle you need..
  • 【High Quality Material】 The Rearview Camera Mount is made of high quality alloy material with beautiful design, corrosion and rust resistance, have a long service life..
  • 【Kindly Reminder】 The license plate camera mount be only applied to US license plates. Do not install the backup camera upside down.Rear camera not included..
Check Stock

Universal Baby Camera Mount Flexible Baby Monitor Holder Shelf Compatible with Infant Optics Baby Monitor,Baby Monitor Camera Holder Strong Camera Shelf Bracket Compatible with Most Baby Monitors

  • ...BY - This flexible baby monitor stand allows you to get the perfect view of the baby. This baby camera stand can be installed on various baby beds,You can adjust and bend its height and angle to get the best position for you. No more worrying about your baby no longer on the screen.Note: First fix the camera on the bracket, and then fix the bracket on the furniture to be placed. Follow the installation instructions (Camera not included)..
  • EASY TO USE, –Strong and sturdy clamp holds your devices securely, baby camera holder has a firm clamp, can be firmly fixed on most surfaces.Bend and rotate it to change the position of the baby monitor as needed to get the best results. The camera stand is firm and firm.Strong clamp with protective pads easily attaches to the crib side,cot, wall shelf,The bracket will not damage the crib or furniture.(It can be installed on furniture with a thickness of 0 to 4.5 cm.).
  • MULTIPLE INSTALLATION METHODS-You can directly use the camera clip to fix the camera (the diameter of the bottom of the camera is 6.5cm to 8.5cm) you can turn the spring screw according to the size of the camera to adjust the "tightness".Use the accessory....
Check Stock

Socobeta Adjustable with 1/in Thread Dual Hot Shoes Holder Mount Adapter Bracket Screw Mount Useful Full-Protective Camera Flash L-Bracket for Camera

  • WITH TWO HOT SHOES：Dual hot shoes holder mount is equipped with two hot shoes, offering multiple combination for mounting flash with other accessories, you can adjust it according to your equipment needs..
  • BEST GIFT FOR FRIENDS：If you have friends who love photography or are often engaged in photography, you can give camera l bracket mount video grip l bracket ring to them, and they will be very happy. Of course, you can also prepare for your child..
  • STANDARD 1/4IN SCREW THREAD：The international standard 1/4in screw thread fits most cameras and camcorders. L shape design is good for horizontal or vertical shooting with a comfortable handle..
  • STURDY AND DURABLE：Camera flash L-bracket is made of the quality material, lightweight, sturdy and durable. Moreover, the service life of the bracket is longer than that of the general bracket..
  • EASY INSTALLATION：The installation method of the flash bracket mount is very simple, you only need to install it according to the correct installation method, l bracket camera mount is very simple and easy to learn..
Check Stock

Livans Helmet Mount Tactical Front Helmet Camera Bracket Accessories Rail Action Camera Helmet NVG Adapter Kit for Gopro Hero 1 2 3 4 5 Excavator ARM Mount

  • PREMIUM ACCESSARY: Tactical Helmet Camera Mount is made of high-quality Nylon plastic and Aluminum, solid and firm for long service life. Package....
  • EASY TO OPERATE AND INSTALLATION: Helmet Camera Bracket easily connect GOPRO to tactical helmets with the professional fixing screw, No need for other....
  • APPLICABILITY: Helmet NVG mount fit Gopro And OPS / TEAM Wendy Style NVG Helmet Base. This mounting bracket is suitable for many types of helmet bases....
  • CATCH EVERY MOMENT: Camera bracket mount helps you catch every significant moment, which is so important. Easy access to different types of outdoor....
  • SPECIFICATION: Color：Tan/Black. Size:3*2.5*2.1cm/1.2*1*0.8" (Rail Bracket).
  • 4.3*5*6.5cm/1.6*1.9*2.5" (Helme Bracket). Any problem with the helmet....
Check Stock

ChromLives Camera L Bracket Mount Video Grip L-Bracket with Dual Flash Cold Shoe Mount 1/4'' Tripod Screw, Heavy Duty Padded Hand Grip for DSLR Camera Camcorder (Updated)

  • This is a heavy duty photography video camera L bracket with dual flash cold shoe mounts,1/4” thread hole on top,and 1/4” tripod screw on base plate for any standard camera or camcorder.This camera L bracket allows you to attach a light source to the hot shoe, which sets the light source away from the camera. This helps reduce red eye and reduce harsh shadows..
  • REMOVABLE COLD SHOES-This L bracket is updated with two solid removable flash shoe mounts for added light source, Far exceeds the built-in shoe mount version which will risk your delicate flash/monitor to slide off. Provides an economical way to do both horizontal and vertical flash..
  • UNIVERSAL 1/4” SCREW- Updated with an extra 1/4” screw hole between the two cold shoe mount for more configuration. Comes with a 1/4”-20 thumb screw to connect your camera camcorder,action camera etc,. 1/4” threaded hole on the bottom of the thumb screw.
  • ERGONOMICS HAND GRIP- Smart padded hand grip design for easy holding. Strong construction..
  • SOLID MADE- The l shape bracket is made of high quality aluminum metal and padded grip is made of hard plastic. Heavy duty and strong..
Check Stock

Suuonee Motorcycle Camera Bracket, Aluminium Alloy Motorcycle Digital Video Recorder Camera VCR Mount Bracket (GREY)

  • Compatible: Motorcycle Camera Bracket is fit for most vehicle model / SUZUKI / / / DUCATI / . Produced according to the original factory standards, you can be purchased and used with confidence..
  • High quality: Digital Video Bracket is made of high quality aluminum alloy material, which is durable and stable. Good quality can provide a safer guarantee for your life..
  • Features: VCR Mount Bracket can be installed on the motorcycle rear mirror bracket, and there are three colors to choose. Its a great accessory for motorcycle enthusiasts..
  • Easy to install: Motorcycle Camera Bracket is very simple to install, perfectly replace your old or broken bracket. Let you get rid of the trouble of installation..
  • Guarantee: We offer a 12 month warranty, true worry free shopping experience. If you have any problem, feel free to contact us, our professional mechanic will sort things out for you..
Check Stock

Neewer X1 Mini Teleprompter, 8\ Portable Teleprompter for iPad Tablet Smartphone DSLR Cameras with Remote Control, App Compatible with iOS/Android for Online Teaching/Vlogging/Live Streaming

  • 8-inch Portable Mini Teleprompter: With a 5.74"×5.74" / 14.5×14.5cm screen, the X1 mini teleprompter is designed to fit cellphone and tablet for live streaming and video recording, compatible with iPhone 12 Pro Max, iPhone 12, iPhone 12 Pro, iPad Mini, Galaxy S21+, Galaxy Note 20, and more.
  • Easy-to-Read Display: Built with beam splitter glass with up to 97% light transmittance, and an adjustable hood to block light, the text on your smartphone can be clearly reflected on this teleprompter’s display.
  • Smart Control: It supports remote control via the included remote and the Inmei teleprompter App. With one click of the button, you can pause, speed up or down, and turn pages with ease.
  • Hassle-Free Assembly: The teleprompter is easy to set up, whether to record with a camera or a cellphone.
  • Place a cellphone or iPad mini at its front to display text, then mount your camera on the Z-shaped camera bracket, or your cellphone on the L-shaped phone bracket, to start shooting videos.
  • Package Contents: Teleprompter, Remote Control, Phone Holder, Quick Release Plate, Camera Shading Hood, Phone Shading Plate, Phone Lens Adapter Plate Set, Z-Shaped Camera Bracket, L-Shaped Phone Bracket, Screwdriver.
Check Stock