Reviews Cam For 5 3 With Stock Converter

Texas Speed TSP Stage 2 Low Lift Truck Camshaft Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0 (Camshaft, Springs, Seals, Gaskets and Pushrods)

  • Texas Speed Stage 2 Low Lift 212/218, .550"/.550" 112 LSA Camshaft. With a 112 Lobe Separation Angle (LSA). These camshafts have a 3-bolt timing gear pattern. Includes Camshaft, Beehive Springs, Michigan Motorsports Seals, Cam Install Gasket Kit and Chromoly Pushrods.
  • This cam gained 51.4 HP and 22.9 TQ at the flywheel on the in-house SuperFlow 902 engine dyno using an otherwise stock 5.3L engine!.
  • This cam uses proprietary TSP lobe profiles that are designed to utilize the factory GM LS6 single beehive valve springs and your factory pushrods, making them the most affordable cam package on the market..
  • This is an excellent performance camshaft with a smooth idle! We've had tons of customers select this camshaft when looking for a cam that drives almost stock, and can be hidden with some exhaust systems! If you're looking for a small, stealth camshaft the 212/218 is a great option to consider.. It is ideal for 4.8L and 5.3L trucks that want to keep their factory torque converter and not break the bank on more expensive valve springs and pushrods..
  • These cams are designed specifically for 4.8 5.3 6.0 combinations..
Check Stock

Brian Tooley Racing BTR Vortec Truck Stage 2 Cam and Spring Kit 4.8 5.3 6.0 Includes Beehive Springs and Michigan Motorsports Valve Seals

  • Brian Tooley Racing BTR Truck Stage 2 Camshaft Kit 4.8 5.3 6.0 Camshaft and Beehive Springs and Michigan Motorsports Valve Seals.
  • The Brian Tooley Vortec Racing Truck Cam Kit includes: Stage 2 Truck Cam, Beehive Springs and Michigan Motorsports Valve Seals.
  • These Vortec Truck cams use a 3 bolt cam gear and were designed with low lift so GM LS2, LS3 and LS6 springs and pushrods can be used, making these the most affordable truck cams available..
  • The Stage II cam has more of a noticable idle, with even more average torque production than the Stage I cam, at the sacrifice of some low end torque and fuel mileage..
  • This is the largest cam we recommend to run with stock 4L60E converter in a 4.8/5.3. Specs are 212/218 .553/.553 111.
Check Stock

COMP Cams 127020 Mutha' Thumpr NSR 234/254 Hydraulic Roller Cams for Ford 4.6/5.4L Modular 3-V

  • SOHC - Mutha' Thumpr NSR (NO SPRINGS REQUIRED): Very rough idle, biggest cam for stock heads. Great power above 4900 rpm. Compatible with stock valve springs, benefits from converter and gears, requires cam phaser upgrade and custom tuning..
  • 273/306 Advertised Duration, 234/254 Duration @ .050 inch, .450 inch/.450 inch Lift, 109 Lobe Separation.
  • Part #26113-24 valve springs available but not required.
  • Steel retainer part #710-24 and titanium retainer part #702-24 also available.
Check Stock

COMP Cams CL12-242-2 Xtreme Energy 224/230 Hydraulic Flat Cam and Lifter Kit Chevrolet Small Block

  • Great for street machines, largest cam for stock converter, better with 2000+ stall..
  • 224/230 Duration at .050". 110 Degree Lobe Separation Angle. 0.477"/0.480" Valve Lift.
  • CL Kits include a camshaft, a set of lifters, instructions and assembly lubricant..
  • Excellent performance in street carbureted applications. Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve..
Check Stock

CHEVY GM LS Turbo Exhaust Hotparts T4 Kit Vortec V8 4.8 5.3 6.0 LSX Manifolds

  • Brian Tooley Camshaft, BTR Platinum dual springs with Steel Retainers, and 7.400 Chromoly Pushrods..
  • Cam specs are Specs: 226/231 .610"/.608" 113+4 and comes a 3 bolt timing gear pattern..
  • When you need a little more RPM than the stage 1 can give you. If you have a light car wanting to push the limits, then this is the go to cam for your 5.3/6.0 S400 equipped combination..
  • Springs: BTR Platinum Dual Spring Kit for LS engines using stock rocker arms. Includes dual polished springs, matching Steel Retainers (faster reving than steel), Locators for stock guides, locks and seals..
  • Pushrods: 7.400" Long 5/16 Chromoly .080 Wall Pushrods by Brian Tooley Racing. Highly recommended when upgrading Camshafts..
Check Stock

Texas Speed TSP 228R 228/228 .600\/.600\ Camshaft, Spring Kit, Chromoly Pushrods, and Gasket Set. 4.8 5.3 5.7 6.0 LS Cam (Camshaft, Spring Kit, and Gasket Set)

  • Texas Speed TSP 228R 228/228 .600"/.600" 112 LSA Camshaft 4.8 5.3 5.7 6.0 LS Cam.
  • Includes TSP .660" Dual Spring Kit w/ PAC Racing Polished Springs, Titanium Retainers, Hardened Spring Seats, and New Valve Stem Seals, Crank Bolt & Gaskets for Water Pump, Timing Cover, & Front Seal.
  • The 112LSA helps to bring the camshafts powerband lower in the rpm band. The lower LSA also creates a slightly rougher idle..
  • The 228R camshaft is a very popular camshaft for customers wanting a very streetable camshaft that makes approximately 5-7 more horsepower than the 224R camshaft..
  • Dyno testing has shown the 228R camshaft to make a solid 45-50rwhp gains. The 228R camshaft is large enough that we recommend a larger than stock stall converter in automatic cars. Tuning will also be required in both automatic & manual applications..
Check Stock

Brian Tooley Racing BTR Turbo LS Stage 3 Cam, Spring Kit with Titanium Retainers and Chromoly Pushrods LS1 LS2 LS3 LQ4 LQ9 LM7 4.8 5.3 6.0 6.2

  • Brian Tooley Turbo LS Stage 3 Camshaft, BTR Platinum dual springs with Lightweight Titanium Retainers, and 7.400 Chromoly Pushrods..
  • Cam specs are:230/235 .616"/.614" 114+4 and comes a 3 bolt timing gear pattern..
  • When you need a little more RPM than the stage 2 can give you. If you have a light car wanting to push the limits, then this is the go to cam for your 5.3/6.0 S400 equipped combination..
  • Springs: BTR Platinum Dual Spring Kit for LS engines using stock rocker arms. Includes dual polished springs, matching lightweight Titanium Retainers (faster reving than steel), Locators for stock guides, locks and seals..
  • Pushrods: 7.400" Long 5/16 Chromoly .080 Wall Pushrods by Brian Tooley Racing. Highly recommended when upgrading Camshafts..
Check Stock

BRIAN TOOLEY BTR Turbo LS Stage 2 Cam, Spring Kit with Titanium Retainers and Chromoly Pushrods - LS1 LS2 LS3 LQ4 LQ9 LM7 4.8 5.3 6.0 6.2

  • Brian Tooley Camshaft, BTR Platinum dual springs with Lightweight Titanium Retainers, and 7.400 Chromoly Pushrods..
  • Cam specs are 226/231 .610"/.608" 113+4 and comes a 3 bolt timing gear pattern..
  • When you need a little more RPM than the stage 1 can give you. If you have a light car wanting to push the limits, then this is the go to cam for your 5.3/6.0 S400 equipped combination..
  • Springs: BTR Platinum Dual Spring Kit for LS engines using stock rocker arms. Includes dual polished springs, matching lightweight Titanium Retainers (faster reving than steel), Locators for stock guides, locks and seals..
  • Pushrod Specs are: 7.400" Long 5/16 Chromoly .080 Wall Pushrods by Brian Tooley Racing. Highly recommended when upgrading Camshafts..
Check Stock

Michigan Motorsports LS1 Rocker Arms and Bolts with Trunion Kit Installed FITS LS2 LS6 LQ4 LQ9 LM7 4.8 5.3 5.7 6.0

  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor..
  • We utilize LS rocker arms and install new LS1 rocker arm retro-fit trunion kit that replaces the cageless, loose OEM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunion and caged roller bearings for added durability. The caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS1 needle bearings, which can send loose needles throughout the engine upon failure..
  • LS1 style allen head bolts are included for installation. Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor.
  • This kit includes: 16 LS Series Rocker Arms 16 rocker arm trunnions- LS-type retrofit 32 rocker arm bearin....
Check Stock

Shift Rite Transmissions replacement for 68RFE 07-2010 4X4 Transmission remanufactured 6.7L Shift Rite 68RFE

  • Remanufactured 68RFE 4X4 6.7L Transmission.
  • Torque converter is included! Updates to the TC limit valve, Updated UD/OD snap ring, TransGo Shift correction kit and much more!.
  • 1 Year 36,000 Mile Warranty. We offer an extended Warranty 2 Year 50,000 Mile Warranty, or a 3 Year 100,000 Mile Warranty for an additional charge..
  • MASTER KIT (CLUTCHES, STEELS, BONDED PISTONS, OVERHAUL KIT) OEM MOPAR Solenoid Pack & MLPS Cam Plate OEM MOPAR Line Pressure Sensor Pump Gears Updated Welded Rear Planetary Pins (corrects pin walk) Updated Separator Plate Gaskets Sonnax Solenoid Switch Valve and Plug Kit (Reaming Required) Sonnax TC Limit Valve / Sleeve (Reaming Required) Updated Valve Body Resurfacing.
  • CORE CHARGE is $2,500! CALL AHEAD!! THANKS! Phone/Fax: (815) 9 3 5-2 3 5 6.
Check Stock

Chrome Vented Gas Cap Motorcycle Tank Peanut Style Sportster Bobber Harley Davidson Dyna Electra Chopper Bayonet Cam Fuel Caps Custom Bike Builder Shovelhead OEM 61103-36 DS 139552 61102-73 75-003 005

  • Excellent Quality ( Not Made in China ) New Chrome Vented Cam Bayonet Gas Cap Bobber Motorcycle Fuel Tank.
  • Chrome Bayonet Cam Harley stock style Vented Gas Cap Shovelhead FL Sportster FX These bayonet style gas caps (also known as cam gas caps) are vented and are chromed steel. An inexpensive cap that does the job and works with stock ('36 - '82) and aftermarket gas tanks with the bayonet style bung. This vented cap will work on single-cap model gas tanks or for the right-side gas tank on dual tank models gas cap Replaces Harley-Davidson OEM # 61103-36.
  • Chrome Vented Gas Cap for HarIey Gas Tank & Peanut Tank Bobber Style Cap 73-82.
  • Thanks for Looking at our Quality items,Tanks are pressure tested , Be sure fit of tank, mounting hardware, petcocks and gas caps are true prior to painting No stress is applied to the tabs when bolting them to the frame, this can lead to cracking of welds. If needed, use leather or rubber washes to shim between the tabs and the backbone to ensure an even fit. Do not sand seams or welded edges of gas tanks, if needed use a thin spread of body filler prior to painting.
  • Chrome Bayonet Cam Harley stock style Vented Gas Cap Shovelhead FL Sportster FX These bayonet style gas caps (also known as cam gas caps) are vented and are chro....
Check Stock

Comp Cams 12-600-8 Thumpr 227/241 Hydraulic Roller Cam for Chevrolet Small Block, camshaft only

  • High performance street, stock converter ok, best with 2000+ converter and gears, choppy/thumping idle..
  • 227/241 Duration at .050". 107 Degree Lobe Separation Angle.
  • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note. Best with aftermarket converters and more rear gear..
Check Stock

Xtreme Energy 224/232 Cams for Ford 4.6/5.4L Modular 2 Valve

  • Excellent upgrade from stock cam. Improved torque and power. Works with stock computer, best with custom tuning. Smooth idle..
  • 224/232 Duration at .050". 114 Degree Lobe Separation Angle.
  • Excellent performance in street carbureted applications..
Check Stock