Reviews Calipers Kit

2" DROP SUSPENSION & WILWOOD 4 PISTON BRAKE SET FOR 55-57 CHEVY, CURRIE REAR END, AXLES, 9" FORD POSI-TRAC 3RD MEMBER, RED CALIPERS, 12" ROTORS SPINDLES MASTER CYLINDER BOOSTER CONTROL ARMS

  • Brand New Suspension & 12" Wilwood Brake Kit For 1955-1957 Chevys with 2" Drop Spindles (Part # GMB5557X-K72). This specific set features 2" drop spindles, Rotors, and Red Dynalite 4 piston front calipers & Red Dynalite 4 piston rear calipers. Fits: 1955-1957 Chevrolet Bel Air, Delray, 150, & 210. Excludes All Station Wagons, Sedan Deliveries, and Nomads due to their Bowtie shaped gas tank that requires a centered housing rear end, as opposed to a centered pinion rear end..
  • Includes: *Currie 9-Plus Notch-Back rear end with 31 spline axles (#CE-GMB5557X): Currie crate rear ends are designed to be a bolt-in upgrade. Built to the stock 60” width & pinion specs. Heavy-duty 2" wide leaf spring pads are installed in the stock location for easy bolt-in installation *Southwest Speed 9" Ford Rear End Third Member With Posi Trac-Loc (#603-2078): This kit comes with a 3.70 ratio gear, which is a good cruising ratio. We have ratios from 3.50 to 5.00 that can be substituted in.
  • *Southwest Speed 2" Drop Spindles (SWS Part # 103-9760): SWS drop spindles provide a full 2" drop, while not changing the vehicle's steering geome....
Check Stock

NEW 2\ DROP SUSPENSION & WILWOOD BRAKE SET, SPINDLES, CURRIE REAR END & AXLES, POSI, 11\ DRILLED DISCS, BLACK CALIPERS, MASTER, BOOSTER, ARMS, 1968 1969 1970 1971 1972 CHEVELLE EL CAMINO CUTLASS GTO

  • Brand New Suspension and Brake Kit, with 2" Drop Spindles, for 1968-1972 GM A-Body Cars (Part # GMA6872X-K73) 003e This specific set features 2" Drop Spindles, Steering Arms, and Wilwood brakes with Drilled/Slotted Rotors and Black Calipers.
  • Includes: | Currie 9-Plus Notch-Back Rear End with 31 Spline Axles (Currie # CE-GMA6872X) | Southwest Speed 9" Ford Rear End Third Member with Posi Trac-Loc (SWS Part # 603-2078) | Southwest Speed 2" Drop Spindles (SWS Part # 103-9776) | Southwest Speed Steering Arms (SWS Part # 101-9652).
  • Wilwood Disc Brake Kit with Drilled Rotors and Black Calipers (Wilwood Part # 140-10996-D Front and # 140-140-11389-D Rear) | *** These Brake kits require at least 15" diameter wheels ***.
  • Front Brake Kit includes 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors 003e Forged Dynalite 4 Piston Calipers - Black 003e Caliper Mounting Brackets 003e BP-10 Brake Pads 003e Hubs, Bearings, Seals 003e All hardware to install | Rear Brake Kit includes: 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats 003e Low-Profile Dynapro 4 Piston Calipers - Black 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Brake Pads 003e All hardware to install.
Check Stock

NEW CURRIE 70-87 CHEVY C-10 GMC C-15 C1500 TRUCK 2WD 5-LUG REAR END WITH WILWOOD DISC BRAKES, 11\ DRILLED ROTORS, RED CALIPERS, LINES, PARKING BRAKES, AXLES BEARINGS C10 C15, 1982 1983 1984 1985 1986

  • New Currie Enterprises Rear End with 31 Spline Axles with Wilwood Disc Brake Kit including Drilled Rotors and Red Calipers, Parking Brake Cable Kit, and Brake Line Kit for the applications below (Part # GMC7087X5-K7) 003e Currie Crate Rear Ends are designed to be a bolt-in upgrade.
  • Fits: | Chevrolet Trucks: 003e Will Fit All Late-1970 to 1987 C-10 2wd Trucks with 5-Lug wheels | GMC Trucks: 003e Will Fit All Late-1970 to 1987 C15/C1500 2wd Trucks with 5-Lug wheels.
  • Includes: | Currie 9-Plus Centurian Notch-Back Rear End with 31 Spline Axles (Currie # CE-GMC7087X5) 003e 31 Spline performance axle package 003e Housing includes all 3rd member studs installed 003e GMT7087X5 GMC7072X5 GMC7387X5 003e Built to the stock overall width (63 5/8") and pinion offset specs 003e 63 5/8" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on.
  • Wilwood 11" Disc Brake Kit with Drilled Rotors and Red Calipers (Wilwood Part # 140-11389-DR): | Brake Kit includes: 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats 003e Low-Profile 4 Piston Dynapro Calipers - Red 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Smart Compound Br....
Check Stock

Dupli-Color Single EBCP40500 Caliper Paint Kit Gloss Black Dupi-Color

  • ✅ POR-15 CALIPER PAINTING KIT – Includes everything you need to clean, prep, and paint your calipers. POR-15 Caliper paint has excellent coverage properties, brilliant ceramic-like colors, and withstands temperatures of up to 350°F..
  • ✅ DURABLE – Our caliper paint is beautiful in appearance, and strong enough to withstand the punishment of road debris and temperature extremes, and it looks terrific on any car or truck. Then, whenever your calipers get covered with dirt and brake dust, clean them with anything you like.
  • our brake caliper paint system will stand up to just about anything..
  • ✅ APPLICATION – Be sure to follow our step-by-step instructions for best results. These products should only be handled when wearing latex gloves, eye protections, and an OSHA approved respirator. Always work in a well ventilated area..
  • ✅ WHEN DO I NEED THIS? – Nothing ruins the appearance of a sharp set of wheels like dirty, corroded calipers lurking from behind. Now dress up those steel or aluminum calipers with a super-tough durable finish using the POR-15 Caliper Painting Kit..
Check Stock

NEW WILWOOD FULL FRONT DISC BRAKE KIT, 12' DRILLED ROTORS, RED DYNALITE CALIPERS, PADS, 2002-2006 ACURA RSX, 2004-2005 HONDA CIVIC HATCHBACK SI 5 LUG, 2002, 2003, 2004, 2005, 2006

  • ...remium Big Brake Forged Dynalite Bolt-On Front Hat and 12.19" Disc Brake Kit (Part # 140-7014-DR) for Both Front Wheels. * Only one side pictured. See the list, the diagram, and the brake kit assembly booklet below for a detail of the auto parts included. * Features Drilled and Slotted Rotors with Powder Coated Red Calipers..
  • Wilwood brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications. * Forged Billet Dynalite Calipers, oversized 12.19" o.d. rotors, and high performance Wilwood brake pads deliver big brake stopping power with high-tech style for front wheel drive sport compacts. These kits are the perfect compliment wheel, tire, and suspension upgrades on all types of vehicles..
  • These Big Brake kits require at least 16" diameter wheels..
  • Brake kit includes parts for both front wheels: | * Drilled and Slotted,.810" Thick x 12.19" O.D. Rotors | * Forged Dynalite Calipers - Red | * Caliper Mounting Brackets | * BP-10 Smart Compound Brake Pads | * Brake Hats | * All Hardware necessary to install the complete braking system on both front wheels | * Complete brake kit weighs approximately 36 lbs. | Below you can view and download th....
Check Stock

Universal 9' Rear-End Disc Brake Conversion Kit, Red, for Ford

  • Easy to install, bolt on rear disc brake kit for your pre-1980 Ford passenger car 9 Inch rear-end.
  • Features drilled/slotted rotors, red single piston calipers w/ pads, braided stainless hoses, E-brake loaded calipers, as well as all brackets & hardware.
  • The rotors have a dual drilled bolt pattern for use with 5 on 4.5" or 5 on 4.75".
  • This kit also includes detailed instructions for a quick and painless installation.
  • Requires use of 15" or larger wheels due to clearance.
Check Stock

21PC Universal Disc Brake Caliper Piston Pad Car Auto Wind Back Hand Tool Kit

  • This tool kit allows you to rewind the pistons in brake calipers by hand without damaging the gaskets in the pistons. It does this by allowing the rotation of the piston at the same time as pushing the piston back into the caliper..
  • This set includes both right and left hand threaded rewind tools 2 pin fixed drives 17 adaptors which fit a variety of modern cars Complete with sturdy blow molded case for storage and ease of transportation.
  • This kit enables the rewinding of pistons back into the core on most disc brake calipers this allows you to service and replace worn brake pads on both wind back and push back type brakes.
  • Color: Gray Dimensions: (13.18 x 2.75 x 9.25)" / (33.5 x 7 x 23.5)cm (L x W x H) Weight: 88.89oz / 2.52kg Quantity: 21 Pcs Adaptable Car: Universal.
  • Package Includes: 1 x 21pcs Disc Brake Caliper Wind Back Tool Kit 1 x User's Manual.
Check Stock

G2 Brake Caliper Paint Set High Temperature High Gloss Self Leveling Brush On Brake Calliper Paint System Kit (Red Fire)

  • This top-of-the-line BRAKE Caliper Paint System Set from G2, is the most complete and easy-to-use kit available and includes everything necessary to paint four (4) standard sized brake calipers or two (2) drums in your driveway or professional performance shop..
  • G2 has specially contracted chemical engineers to research and develop our two-part paint which now offers the highest heat resistance on the DIY aftermarket (up to 980 degrees). Easily applied as a brush-on, the paint adds a great styling touch to any brake caliper ultimately highlighting already stylish show-through rims..
  • Each kit is hand-assembled and all of our materials are 100% made in the USA! Included is a high-performance aerosol caliper cleaner, mixing can, stirrer, application brush, installation instructions and a color decal..
  • The G2 High Temperature Brake Caliper Paint System Set contains approximately 3 1/2 liquid oz. of paint and approximately 1/2 liquid oz. of reactor, yielding 4 liquid oz. total when mixed, which will cover four (4) standard brake calipers or two (2) brake drums. However if you have over-sized calipers on the front of your vehicle and/or if you are planning on painting your brackets, rotor caps etc. you'll probably need two kits..
Check Stock

Taytools 6 Piece Measuring Set/Kit with 6" Spring Dividers, Inside & Outside Calipers, Depth Gauge, Pocket Ruler, Vernier Caliper 113500

  • 6 piece measurement kit contains the following:.
  • 6"/150 mm spring inside and outside calipers.
  • 6"/150 mm pocket rule with clip and 6"/150 mm depth gauge.
Check Stock

Glarks 8Pcs Stainless Steel Inside Outside Caliper Set, 4'' 8'' 10'' 12'' Straight/Bent Leg Ceramic Pottery Measuring Tools for Carving, Shaping, Clay Sculpture, Modeling

  • ♛【What You Get】: In this caliper set, it include 4pcs 4'' 8'' 10'' 12'' inside calipers, 4pcs 4'' 8'' 10'' 12'' outside calipers, total 8pcs well packed in a box for measuring when carving, shaping, clay sculpture, modeling..
  • ♛【High Quality】: All the calipers are made of stainless steel with hardened and finely polished points, strong and durable for long time service. Applying anti-rust oil to prevent rust..
  • ♛【Inside/Outside Caliper】: Come with 8pcs inside outside calipers, which size are 4''/150mm, 8''/200mm, 10''/250mm, 12''/300mm. Inside calipers measure hole diameters and distances between surfaces.
  • Outside calipers measure thicknesses and outside diameters of objects..
  • ♛【Product Feature】: Our calipers are lightweight and easy to handle calipers transfer measurements from model to clay for both inside and outside dimensions. Firm joint calipers use friction at the joint to hold the legs not move..
  • ♛【Pratical Calipers】: Great for you to measure the external and internal size which ordinary calipers can not reach, such as sculpture, pottery, tube and so on. Please notice that it will be a little hard to open them for first use, the oil on the calipers will lubricate once opened..
Check Stock

Callahan CCK11689 [2] FRONT Premium Grade OE Semi-Loaded Caliper Assembly Pair Set

  • GUARANTEED ONLY to fit vehicles in the Product Description - see below. Original design ensures proper fit and confident braking..
  • CALIPERS ARE THOROUGHLY INSPECTED for quality and safety. Pressure tested to prevent leaks and ensure confident braking. Premium quality parts ready to install right out of the box. No cleaning required..
  • REMANUFACTURED CALIPERS with brand new components, including seals, springs, bushings, bleeder screws, hardware..
  • ENHANCED STOPPING POWER provides quiet confident braking. 12 months warranty on all parts in the kit..
  • FULLY ASSEMBLED and ready for bolting. No modification required..
Check Stock

Callahan CCK02479 [2] REAR Premium Grade OE Semi-Loaded Caliper Assembly Pair Set

  • GUARANTEED ONLY to fit vehicles in the Product Description - see below. Original design ensures proper fit and confident braking..
  • CALIPERS ARE THOROUGHLY INSPECTED for quality and safety. Pressure tested to prevent leaks and ensure confident braking. Premium quality parts ready to install right out of the box. No cleaning required..
  • REMANUFACTURED CALIPERS with brand new components, including seals, springs, bushings, bleeder screws, hardware..
  • ENHANCED STOPPING POWER provides quiet confident braking. 12 months warranty on all parts in the kit..
  • FULLY ASSEMBLED and ready for bolting. No modification required..
Check Stock

Callahan CCK01502 [2] FRONT Premium Grade OE Semi-Loaded Caliper Assembly Pair Set

  • GUARANTEED ONLY to fit vehicles in the Product Description - see below. Original design ensures proper fit and confident braking..
  • CALIPERS ARE THOROUGHLY INSPECTED for quality and safety. Pressure tested to prevent leaks and ensure confident braking. Premium quality parts ready to install right out of the box. No cleaning required..
  • REMANUFACTURED CALIPERS with brand new components, including seals, springs, bushings, bleeder screws, hardware..
  • ENHANCED STOPPING POWER provides quiet confident braking. 12 months warranty on all parts in the kit..
  • FULLY ASSEMBLED and ready for bolting. No modification required..
Check Stock