Reviews Cable Terminations

Cable Matters Punch-Down Impact Tool with Krone Blade

  • Terminates cable into patch panels and keystone jacks with Krone IDC terminations.
  • Spring-loaded reversible blade with scissors cuts excess wire automatically for a clean connection.
  • Pop-out hook and extractor tool for removing old wires or pushing down wires.
  • Integrated wire-stripper blade seated in the body of the tool with protective guide.
  • Compatible with Cat5 cable, Cat5E cable, Cat6 cable, and Cat6a cable.
Check Stock

InstallGear 14 Gauge Speaker Wire OFC Oxygen-Free Copper, 100-feet

  • NOTE: This is a single cable, for wiring one speaker. If you are connecting a pair of speakers, you will need two..
  • All terminations are ultrasonically welded in our Seattle shop on our Sonobond Ultrasonic welder, using Belden cable..
  • Ultrasonic welding gives this cable exceptional pull strength and low contact resistance.
Check Stock

Hosa YPP-111 1/4\ TS to Dual 1/4\ TSF Y Cable

  • This cable is designed to duplicate a mono signal.
  • Connectors): 1/4 in TS to dual 1/4 in TSF.
Check Stock

trueCABLE All-In-One Crimp and Termination Tool, Compatible with Cat5e, Cat6, Cat6A Ethernet RJ45 Connectors, Shielded & Unshielded, Pass Through, and Standard Modular Plugs

  • ...able strain latch presser bar enables you to use this tool with any style RJ45 connector on the market. Unshielded, shielded (internal and external ground), pass through, load bar style push in plugs, and everything else except AMP. Tested extensively with trueCABLE RJ45 modular plugs..
  • COMPACT. Whether it’s a few terminations or thousands, our high performance multi-tool will handle the job. The ergonomic spring loaded handle returns to a ready position upon cycle completion. Our easy to use sliding “gun style” lock keeps the tool closed when not in operation..
  • ALL-IN-ONE. Need to crimp an external ground tab on your shielded RJ45 connector? No problem. Our tool is outfitted with a dual cavity ground crimp that accommodates a wide range of cable ODs. Forget your cable stripping and cutting tool? No worries. This tool includes a self-adjusting cable stripper that accommodates cable ODs from 6mm to 8mm..
  • CONVENIENT. Trims conductors from the nose of the plug accurately and automatically, even staggered conductor plugs. T568A and T568B color code combinations screen printed on the side of the tool for quick reference..
  • ✓ FIELD TESTED, CUSTOMER APPROVED. Black oxide coated carbon tool steel one-piece casting, engineered for smooth and dependable ope....
Check Stock

Hosa MID-301BK 5-Pin DIN to 5-Pin DIN MIDI Cable, 1 Foot

  • Hosa Cable Standard MIDI Cable feature precision-molded terminations for a tight, positive fit..
  • All five pins are discretely (individually) wired, with one conductor forming the high-density spiral shield..
  • Recommended for all MIDI use, including computer sequencing, transmission of MIDI Time Code, and system-exclusive uploading/downloading..
Check Stock

Fluke Networks 11291000 Pro-Tool Kit IS40 with Punch Down Tool

  • Kit includes ergonomically designed dur a grip pouch for convenient tool storage on belt.
  • D814 industry standard punchdown tool makes for solid terminations.
  • Easy to use cable stripper quickly rings and slits many types of cable.
  • Use the probe pic to check for loose or damaged connections.
  • Cut and strip wire more cleanly and quickly with the electricians’ d snips.
Check Stock

Fluke Networks 11293000 Pro-Tool Kit IS60 with Punch Down Tool

  • Kit includes ergonomically designed Dur a Grip pouch for convenient tool storage on belt.
  • D914S industry standard punch down tool makes for solid terminations, reduces hand fatigue and includes a built in hook & spudger.
  • Easy to use cable stripper quickly rings and slits many types of cable.
  • Cut and strip wire more cleanly and quickly with the Electricians D Snips.
Check Stock

uxcell IDC Gray Wire Flat Ribbon Cable 26 Pins 128cm Length 2.54mm Pitch Type-B

  • 26Pins Connector Flat Ribbon Cable, 2.54mm Pitch.
  • Connector Type: Type B (Please refer to the last picture).
  • Easily and directly inserted into PCB. Ribbon cable saves space and time on circuit interconnecting assemblies..
  • The Conductor ribbon cable separate easily for clean terminations with standard wire connectors and pins..
  • Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors..
Check Stock

uxcell IDC Rainbow Wire Flat Ribbon Cable 16 Pins 148cm Length 2.54mm Pitch Type-C

  • 16 Pins Connector Flat Ribbon Cable, 2.54mm Pitch.
  • Connector Type: Type C (Please refer to the last picture).
  • Easily and directly inserted into PCB. Ribbon cable saves space and time on circuit interconnecting assemblies..
  • The Conductor ribbon cable separate easily for clean terminations with standard wire connectors, jacks and pins..
  • Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors..
Check Stock

uxcell IDC Rainbow Wire Flat Ribbon Cable 10 Pins 128cm Length 2.54mm Pitch 2pcs Type-B

  • 10 Pins Connector Flat Ribbon Cable, 2.54mm Pitch.
  • Connector Type: Type B (Please refer to the last picture).
  • Easily and directly inserted into PCB. Ribbon cable saves space and time on circuit interconnecting assemblies..
  • The Conductor ribbon cable separate easily for clean terminations with standard wire connectors and pins..
  • Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors..
Check Stock

uxcell IDC Rainbow Wire Flat Ribbon Cable 10 Pins 66cm Length 2.54mm Pitch Type-B

  • 10 Pins Connector Flat Ribbon Cable, 2.54mm Pitch.
  • The "Type-B" means the pin holes towards to the same side, meanwhile, the two buckles are both inside..
  • Easily and directly inserted into PCB. Ribbon cable saves space and time on circuit interconnecting assemblies..
  • The Conductor ribbon cable separate easily for clean terminations with standard wire connectors and pins..
  • Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors..
Check Stock

uxcell IDC Rainbow Wire Flat Ribbon Cable 10 Pins 148cm Length 2.54mm Pitch Type-C

  • 10 Pins Connector Flat Ribbon Cable, 2.54mm Pitch.
  • The "Type-C" means the pin holes towards to the same side, meanwhile, the two buckles are both outside..
  • Easily and directly inserted into PCB. Ribbon cable saves space and time on circuit interconnecting assemblies..
  • The Conductor ribbon cable separate easily for clean terminations with standard wire connectors, jacks and pins..
  • Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors..
Check Stock

Blue Jeans Cable Ten White Speaker Cable with Welded Terminations Single Cable - for one Speaker Assembled in USA 8 Foot Bananas to Bananas

  • NOTE: This is a single cable, for wiring one speaker. If you are connecting a pair of speakers, you will need two..
  • All terminations are ultrasonically welded in our Seattle shop on our Sonobond Ultrasonic welder, using Belden cable..
  • Ultrasonic welding gives this cable exceptional pull strength and low contact resistance.
Check Stock