Reviews Cable Insulated Lugs

IEWC 2 AWG Gauge Ultraflex EPDM Fully Assembled Battery Cables Made in the USA for Positive or Negative Wire Pure Copper Welding Cable Inverter Cables Solar Car Truck RV Camper (1.5ft, Red, 38 inches Lugs)

  • 2 AWG Ultra Flex EPDM battery cables are made from 99.9% pure copper, and insulated in a rubber jacket which offers the best conductivity, flexibility and lowest resistance..
  • Heavy duty tinned copper sealed lugs are crimped on with a 10 ton hydraulic crimper and adhesive lined heat shrink creates a completely sealed battery cable to prevent corrosion. EPDM insulation is oil and fuel resistant and UL listed..
  • Sold as one red cable or one black cable, or a red/black set, in 5/16” or 3/8” terminal hole size. All lengths measure eye to eye on the terminal lugs. 2 gauge cable can carry higher amperage with lower voltage drop than 4 gauge cables..
  • American made fine strand pure copper to reduce resistance and increase flexibility which will offer a lifetime of reliability in various applications including cars, trucks, RV, Solar, inverter cables..
  • 100% Guarantee! Built in the USA on a hydraulic press for a 100% secure and proper crimp. All of this adds up to a cable that is built for life!.
Check Stock

WindyNation 6 Gauge AWG (20 Feet Black + 20 Feet Red) Power Inverter Battery Cable Wire Kit for DC to AC Inverters RV, Car, Solar, Marine, Off-Grid

  • Includes 1pc black + 1pc red pure copper inverter cables (select cable gauge and length), 8 feet of 10 Gauge black grounding cable with cable lug connectors, 4pcs of 5/16" cable lug connectors + 4pcs of 3/8" cable lug connectors with heat shrink tubing..
  • Extra battery cable lugs are included so you can attach the appropriate stud size for your battery and inverter mounting terminals. 4pcs of 5/16" cable lugs and 4pcs of 3/8" cable lugs allow for all possible combinations (nearly all inverters and batteries use 5/16" and/or 3/8" mounting terminals). Simply attach the appropriate cable lug stud size to the cable that fits your inverter and battery mounting terminals..
  • Inverter cables are WindyNation Power-Flex Battery Cable (pure copper) with SAE J1127 approval. Power-Flex cable is a pure copper conductor and very flexible..
  • Refer to Image 2 in the photo gallery for a chart that will help you select the correct inverter cable gauge and length depending on the amperage of your inverter..
  • Cable lugs are pure copper with a corrosion resistant tin coating. Heat shrink is black with and certified for up to 105 C and 600V..
Check Stock

Ampper 5 AWG Battery Cable Set, 20 Inch Copper Power Inverter Cables with Terminals for Car, Vehicle, RV, Solar Application and More (3/8\ Ring, 1 Set)

  • Heavy Duty: a set 5 gauge wire positive (red) and negative (black) copper battery cables, 20 inch for every cable..
  • Easy to Use: each cable have 2 pcs 3/8" (M10) round center hole terminals (already crimped) on both ends, fit for 3/8" (M10) stud..
  • High Quality: copper cables for maximum power transfer, nickel plated copper lugs for superior corrosion and oxidation resistance..
  • Safe & Durable: premium PVC insulated jacket for the cables, cable ends are sealed with heat shrink tubing for heat insulation..
  • Compatible: used for car, vehicle, RV, solar application, boat and more, also used for electrical equipment..
Check Stock

True UTV-SBI-CK UTV Dual Battery Kit.

  • ANY RETURNS AUTHORIZED BY AMAZON WILL NOT BE ACCEPTED.
  • 1- True UTV-SBI-18 Isolator with silicon insulators and 3M Dual Lock fastener.
  • 1- True 12 inch sealed Red 6ga Cable with two 6mm lugs.
  • 1- True 12 inch sealed Black 6ga Cable with two 6mm lugs.
  • 1- True 18 inch sealed Red 6ga Cable with two 6mm lugs.
Check Stock

Tsinglax 120Pcs Copper Wire Lugs AWG2 4 6 8 10 12 with Heat Shrink Set, 60Pcs Battery Cable Lugs Battery Cable Ends Ring Terminals Connectors with 60Pcs Heat Shrink Tubing Assortment Kit

  • ✔Package Includes: 120pcs 10 Kinds 60 Pcs of AWG 2 4 6 8 10/12 ring terminals copper lugs battery cable ends open end termination ring terminals with 60 Pcs 3:1 Dual Wall Adhesive Heat Shrink Tubing for your work which meet your different needs..
  • ✔Unique and Quality Copper Lugs: All of our SC ring terminals are made of 100% pure copper for maximum conductivity, with tinned surface for corrosion protection. Also, the inspection window design allows visual inspection of proper wire insertion..
  • ✔CONVENIENT TO USE: All the cable lugs are common size which meet the US standard. Terminals with heavy duty construction improves high temperature durability and ensure connection reliability.
  • high standard flared opening for easy wire insertion. Meanwhile, these battery lugs can be crimped or soldered to the wire cable ends depending on your preference..
  • ✔WIDE APPLICATIONS: These battery cable wire lugs are ideal used for distribution box, marine, golf carts, solar panels, home applications, etc. Heat shrink tubing is compliant with vehicle, motorcycle, boat, DIY electrical wirings and other outdoor applications..
  • ✔BEST CUSTOMER SERVICE: We stand behind the quality of our copper wire lugs. If you have any problems concerning our product, please contact us....
Check Stock

Exell Battery 4 Gauge Interconnecting Copper Cable, 6-Inch Length with 5/16-Inch Lugs (Black)

  • HIGH-QUALITY CABLE: This fine-stranded cable has a voltage of 600V and is rated for MTW/THW/AWM. It is also sunlight resistant, can be buried underground, and can handle temperatures up to 105°C (221°F)..
  • ZINC-PLATED COPPER LUGS: The copper lugs on either side of the cable measure 3/8" and have an extremely low coefficient of thermal expansion, which can help lower the risk of fire hazards during connection..
  • MULTIPURPOSE HOOKUPS: This durable connection cable can be used to connect battery banks or cells for products like backup grids, RV hookups, golf carts, emergency systems, solar-powered devices, and much more..
  • HIGH-QUALITY PLASTIC COATING: The cables' outside coating is double crimped to insulate the copper lugs and compression terminals. When heated, the tubing shrinks, which can protect the wires against corrosion and moisture..
  • FLEXIBLE DESIGN: If you lack the room to stretch out the cable between two connections, this cable is flexible enough to accommodate the amount of space you need without causing much wear on the cable's wires or its outer shell..
Check Stock

12V 140A Dual Battery Isolator with Wiring Cable Kit -VSR Voltage Sensitive Relay Compatible with SUV Boat ATV UTV RV Truck-Double Battery Automatic Charger

  • This product is designed for dual battery systems,suit for Most 12V Charging systems.surge protection,Automatically sensing voltage level of main battery.
  • Voltage Sensitive Relay:Voltage Sensitive Relay:Cut in volt 13VDC,Cut out volt 12.8VDC.Ensure main battery is always charged and ready to run the vehicle . the Dual Battery Isolator can charge 2 Battery systems.
  • Constructed with a weatherproof body IP65 and durable silver tipped contacts.
  • Package include：1X 24” length Red Cable (with single connector)丨1x12” length Red Cable (with two connector)丨1x12” length black Cable (with two connector)丨2x SC16-8 Lugs丨1x blue insulated ring terminal丨2x orange heat shrink cover丨3x nut,2x washer,4x screws.
  • 2 Year Warranty:For any reason, if you are not satisfied with your purchase, contact us directly. We offer a 1-year warranty, 100% satisfaction guarantee..
Check Stock

LAWUZA 6 AWG Gauge Battery Inverter Cables, 2 Foot Pure Copper Power Wire for Vehicles Solar Marine RV Car Boat, Red + Black Set, 3/8 in Lugs

  • Pure Copper: Our vehicle battery cables are made of pure electrolytic copper, 100 percent fine stranded pure copper cable for high amperage application..
  • Heavy Duty Flexible Cable: 6 gauge battery cable lugs are tinned coated and utilize a closed end design for corrosion protection and professionally cut and crimped..
  • Copper cable is PVC insulation, oil and fuel resistant, sealed lugs and adhesive lined heat shrink creates a completely sealed battery cable to prevent corrosion..
  • Battery bank cables are perform in various applications including cars, automotive, trucks, RV, Solar, also great use as power inverter cables, RV battery cables, marine battery cables grounding cables..
  • 2 Pack set , 2 foot length black + red positive and negative battery cable with 3/8 in tinned lugs, 6 AWG gauge, heat-resistant..
Check Stock

Teansic 320 PCS Non-Insulated Ring Terminal & Fork Connector Kit, 22-12 AWG Wire Lugs Battery Cable Terminals Electric Pure Copper Crimp Connector

  • ✔GOOD CONDUCTIVITY-All SC ring terminal lugs (AWG 4 6 8 12-10)are made of tinned copper.The surface of the sc cable lugs is protected by tin plating for corrosion protection and fully annealed to ensure optimum ductility ,while providing a high degree of conductivity for maximum current flow..
  • ✔DURABILITY & RELIABLE-These battery cable lugs with heavy duty construction improves high temperature durability and 3:1 dual wall adhesive heat shrink tube well made of high quality material, thick and durable, which ensures its safe and reliable..
  • ✔CRIMPED and SOLDERED-These marine grade battery lugs can be crimped or soldered to the wire ends,each copper lugs with wire size identification on the lugs, so that you quickly find the right terminal, help you to finish the work faster and better..
  • ✔✔MULTI-WIRE GAUGE -Total 72pcs SC wire lugs (SC25-10 SC25-8 SC25-6 SC16-10 SC16-8 SC16-6 SC10-10 SC10-8 SC10-6 SC6-8 SC6-6 SC6-5 ) apply to AWG4 AWG6 AWG8 AWG12-10 wire gauge ,included 1/4" 3/8"and 5/16"#10 stud ,72pcs 3:1 dual wall adhesive heat shrink tube ,meet your different needs..
  • ✔WIDELY APPLICATION-Tinned Copper Eyelets Tubular Battery Lugs with Spy Hole are ideal for distribution boxes, marine, automotive, solar panels, home applications and outdoor a....
Check Stock

Battery Cable Crimping Tool Battery End Crimper Lug Crimper Tool for 8, 6, 4, 2, 1, 1/0 AWG Heavy Duty Wire Lugs with Wire Shear Cutter, Crimping Tool 4AWG by BOOTOP PIN

  • 【Applications】Battery Cable Crimping Tool, battery cable lug crimper is designed to crimp 8, 6, 4, 2, 1, 1/0AWG battery lugs, making secure connection with cables, electrical appliances, and other power mechanisms in harsh-duty environments. Cable lugs can be found on the wiring systems of automobiles, electrical boxes, panels, generators, transformers, many durable goods, and for all electrical lugs appliances..
  • 【ROTATE CRIMP DIES,EASY OPERATION 】Compact rotation die for effortless die changing.The professional cable terminal crimping tool has 6mm²/10mm²/16mm²/25mm²/35mm²/50mm² (Similar to AWG 8，6，4，2，1/0) wire size crimping, using rotating heads with a spring loaded locking pin to keep the heads in place. Press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper then produce a good crimp on cable lugs..
  • 【High Quality,ERGONOMIC DESIGN】Battery lug crimping tool made of high quality carbon steel which can offer long service life. Hexagonal rotating dies of Lug Crimper Tool are processed with Wire EDM Cutting, more accurate than normal casting dies. Crimper with high precision jaw ensure a tightly connection after crimping with strong work pressure. The handle....
Check Stock

AIRIC 6 Gauge Wire Lugs 5/16' Stud (M8) 10pcs UL Heavy Duty Cable Lugs 6 AWG 5/16' Stud Cable Ends Tinned Copper Tubular Lugs Ring Terminal Connectors DIN 46235

  • ★ Designed for durability: 6 AWG 5/16" stud battery cable lugs are designed with a heavy duty construction for high temperature durability and enhanced mechanical strength.
  • ★ UL and DIN 46235 Approved: ring terminals lugs are UL Approved, comply with all relevant European standards. It's in compliance with ROHS directive standards. Meet DIN 46235 standards. Wire can be crimped or soldered to copper lugs, safer, design the fixed close-end structure with stub to ensure connection reliability.
  • ★ High Quality: To provide a high degree of conductivity for maximum current flow, All copper wire lugs terminals are made of T2 copper with 100% anneal. The bright tin-plated surface for corrosion protection.
  • ★ Easy to Install: The AWG wire size and stud size are stamped on the wire lugs, enables universal use with one stud / screw to fix on equipment.
  • ★ Wide Usage: These battery cable lugs are safe and reliable, great for distribution boxes, marines, golf carts, solar panels, home applications, etc..
Check Stock

TKDMR 160Pcs Copper Wire Lugs AWG2 4 6 8 10 12 with Heat Shrink Set, 80Pcs Battery Cable Lugs Battery Cable Ends Ring Terminals Connectors with 80Pcs Heat Shrink Tubing Assortment Kit

  • 【What You Get:】In this set, we offer 10types 80Pcs of AWG 2 4 6 8 10/12 ring terminals copper lugs battery cable ends open end termination ring terminals with 80 Pcs 3:1 Dual Wall Adhesive Heat Shrink Tubing for your work which meet your different needs..
  • 【Design High Quality:】 All the SC ring terminals are made of 100% annealed electrolytic grade copper for maximum conductivity, with tinned surface for corrosion protection.Can be Crimped or Soldered.inspection window design allows visual inspection of proper wire insertion.All the 3:1 shrink tube is well made of high quality material, thick and durable.They are for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable..
  • 【Reliable and Easy to Use:】All the cable lugs are common size which meet the US standard. Terminals with heavy duty construction improves high temperature durability and ensure connection reliability.
  • high standard flared opening for easy wire insertion. Meanwhile, these battery lugs can be crimped or soldered to the wire cable ends depending on your preference..
  • 【Wide Applications:】 These battery cable wire lugs are ideal u....
Check Stock

SVAAR 10pcs 2/0 AWG-3/8”Ring Terminal Cable lug Wire lug Battery Cable Ends Crimp Wire Connector Copper Eyelets Terminal Connector 00 Gauge UL Listed Heavy Duty Battery Lug with 3:1 Heat Shrink Tubing

  • 【Pure Copper Material】Cable lugs are made of purple copper with strong durability ,99.9% purple copper structure achieved excellent conductivity,battery lugs are generally suitable for use with 2/0 or 00 gauge Wire & 3/8" Eye (Stud)..
  • 【Closed-end Designed】These copper ring terminals have a closed end designed,that makes it possible for cables to stay dry and corrosion free.can be connected by crimping and soldering..
  • 【Come with 3:1 Heat Shrink Tubing】00 Gauge Copper lugs come with 3:1 dual wall adhesive heat shrink tubings(5 black+ 5 red),good insulation and sealing effect to keep the cable dry and extend the service life..
  • 【Widely Application】2/0AWGx3/8" wire lugs widely used in household appliances, power distribution cabinets, automobiles, electrical industry, mechanical equipment..
  • 【Package Includes】 10pcs 2/0 Gauge 3/8" ring copper lugs&10 pcs 3:1 adhesive Lined heat shrink tubings,UL tested &approved ,Please contact us promptly if you have any questions about this lugs..
Check Stock