Reviews Cable Clamp Screw

SMALLRIG Mounting Plates and HDMI Cable Clamp for Atomos Ninja V CMA2338

  • ▶ Multiple Threaded Holes: Both the top plate and the bottom plate are mounted to the monitor by a 1/4’’-20 screw and two locating pins.
  • Multiple 1/4’’-20, 3/8‘’-16 holes and an ARRI locating hole are also provided.
  • ▶ HDMI Cable Clamp Plate:The HDMI cable clamp plate is mounted to the monitor side by two M3 screws.
  • The HDMI cable clamp works with a range of Atomos cables protecting both the cable and port.
  • ▶ Built-in NATO Rail: On the top and bottom plates are integrated NATO rails for quick release of monitor by SMALLRIG Ballhead Arm 2071 or 2072.
  • ▶ Compatibility with Atomos Master Caddy II: For backwards compatibility with Atomos Master Caddy II, this kit also features Drive locks that incorporate the additional size of standard 2.5’’ drives into the its form factor.
Check Stock

Coadura Cable Clamps 1 1/2 Inch - Rubber Cushioned Stainless Steel Cable Clamp 30pcs Wire Clamps Hose Clamps Loop Clamps Pipe Clamps

  • Made of high-quality materials - The cable clamps are made of 304 stainless steel with high-quality rubber pads. The cable clamp is sturdy and....
  • Size - Cable clamp screw hole diameter: 6.5mm, fit for 6M( 1/4 inch) screw bolt to through them. Cable clamp inside diameter 1 1/2 inch. Fit for 1 1/2....
  • Easy to install - The R-shaped design is easy to install and disassemble. You only need M6 (6mm) bolts and nuts to easily complete your installation....
  • Widely used - Clamps are marine grade. Perfect to apply in automotive, industrial, boat/marine, windshield, household etc. For wiring, cables, pipe,....
  • Environmental friendly - It can be reused and recycle if you do not want them to stay on the original place thanks to the high quality material which....
Check Stock

Cable Clamp 200 Pcs Black Nylon Plastic R-Type Cable Clamps 3/16 1/4 3/8 1/2 3/4 1 Clips Fasteners Assortment for Cable Conduit

  • PREMIUM QUALITY: Our cable clips are made of nylon plastic, which has good performance in toughness, friction-resistance, corrosion-resistance and....
  • CABLE ORGANIZER: Nylon screw clamp is a fantastic solution for routing cables. Work effectively to organize your mess wires and keep your living place....
  • EASY TO USE: Just put the wires into the round hole of the cable clamp, then fix it with a screw on the wall or the ground after tightening. It is....
  • HASSLE FREE EXPERIENCE: Tidy and fasten the wires, not easy to fall off once fixed. Avoid lots of troubles and give you a tidy comfortable....
  • PACKAGE INCLUDING: Comes with 200 pcs of nylon cable clamp in 6 sizes, and a plastic organizer box for collection and storage. One set that meet most....
Check Stock

BAYTORY 65pcs Cable Clamps Assortment Kit, 304 Stainless Steel Thicker Rubber Cushion Wire Pipe Clamps in 7 Sizes 1/4\ 5/16\ 3/8\ 1/2\ 5/8\ 3/4\ 1\

  • High Quality: We have professional production equipment and technical personnel. Cable Clamps made from 304 Premium Stainless steel Material with quality rubber cushioned (EPDM). Salt resistant, antirust, anti-corrosion, waterproof, oil-proof. Clamps are sturdy, strong and reliable. The quality rubber insulation on the clamps holds up flawlessly. It is pliable which protect the tube well and keeps the clamp securely in place..
  • Size & Quantity: Cable clamp screw hold diameter: 6.5mm, suitable for 6mm (1/4'') screw bolts and nuts to thread. Cable clamp inside diameter range: 1/4"(15pcs), 5/16"(10pcs), 3/8"(10pcs), 1/2"(10pcs), 5/8"(10pcs), 3/4"(5pcs), 1"(5pcs)(6mm~25mm). Fit for outside diameter range of 1/4"- 1" wiring, lines, hoses or cables to a panel or frame application..
  • Widely Used: Clamps are marine grade. Perfect to apply in automotive, industrial, boat/marine, windshield, household etc. for wiring, cables, pipe, rack, line management and restoration. No matter in salt water/air environment..
  • Environmentally Friendly: It can be reused and recycle if you do not want them to stay on the original place thanks to the high quality material which makes them worked last for years..
  • Package Included: You will receive 65 Pieces cable clamps in compartmenta....
Check Stock

Clamp Type Connector Cable Connector Clamp Cable Connector for Metallic Conduit Protect Cables Silver (4, 3/4 Inch)

  • Multi-quantity: there are 8 pieces cable connectors in the package, enough quantity to meet your replacement and using needs in daily work, better cooperate with you to finish work.
  • Durable material: wire connectors are made of zinc alloy material, not easy to rust, durable and practical, can be applied for a long time after heat treatment, and with the corrosion-resistant zinc die-cast structure.
  • Sturdy metal structure: cable connector kit has metal structure, which ensures mechanical protection of the raceway, protects your wires from damage, and prevents hazards of leakage, safe and sturdy.
  • Screw straps design: the 650XY2 clamp type connector has 2 pieces screw straps and flexible conduit FTGS.
  • It is the service entrance cable fittings but does not the metallic cable.
  • Cable size measures 14 awg, and the knockout is about 1/2 inches.
  • Size information: cable connector clamp is about 1/2 inches, before purchasing, pay attention to whether it meets your daily needs for work and cooperation, in order to prevent wrong purchase.
Check Stock

SMALLRIG HDMI Cable Clamp for Blackmagic Video Assist Monitor Cage, G7/GH4/GH3 Cage, BMMCC Cage - 1693

  • SmallRig HDMI Cable Clamp 1693 can provide strain relief for Micro-HDMI cable where frequent tugging could cause damage to the camera. With only one screw to mount to the cage and lock the cable, it can save space for other accessories..
  • The HIDM Lock can only be used on SmallRig Cage 1779 (for Panasonic G7), SmallRig Cage 1773 (for Blackmagic Micro Cinema Camera), SmallRig 1585 (for Panasonic GH4/GH3), and SmallRig 1830 (for Blackmagic Video Assist 7" Monitor), SmallRig Cage 1726 ( for Blackmagic Video Assist 5" Monitor)..
  • Lock just use a 1/4"-20 screw on the cage, you could attach more accessories. The unsmooth surface (the part clamping the cable) of the cable clamp can increase friction in case of the accidental removal..
  • HDMI lock could be adjusted in width for Micro-HDMI cables of different standards..
  • Made of 6061 aluminum alloy, surface is very smooth after hard oxidation. Very comfortable to use. Please kindly read which camera cage it will be used on before purchasing..
Check Stock

Neewer Microphone Arm Stand with Upgraded C Clamp, Adjustable Suspension Boom Scissor Mic Stand with 3/8”-5/8” Adapter, Mic Clip, Cable Ties Compatible with Blue Yeti/Snowball, QuadCast, Max Load 2KG

  • 【Flexible & Durable Boom】 The Neewer boom arm offers 360° rotation and smooth movement in vertical and horizontal directions for flexible positioning. The durable steel build ensures a maximum load capacity of 4.4lb (2kg)—ideal for singing, podcasting, live streaming, and video gaming.
  • 【Upgraded Desktop Clamp】 The upgraded C-clamp with a widened base is more stable than ever and compatible with desks of up to 2.55” (6.5cm) thick. Its edge-mounted design can keep your desktop clean, and the inner rubber pads avoid scratches.
  • 【Mic Clip & Screw Adapter】 The microphone clip fits various condenser microphones up to 1.26” (3.2cm) in diameter, and the 3/8” to 5/8” screw adapter can let it compatible with Blue Yeti, QuadCast, and other microphones to this boom arm.
  • 【Convenient Cable Straps】 Five hook-and-loop cable straps allow you to tie the microphone cable along the boom arm and prevent it from tangling and dangling.
  • 【Package Contents】 1 × Microphone Boom Arm, 1 × Desk Mounting Clamp, 1 × Microphone Clip, 1 × 3/8” to 5/8” Adapter, 5 × Cable Strap.
Check Stock

MAGICRIG HDMI Cable Clamp Lock for Sony A7RIII A7RII A7SII A7SIII A7MII A7III A7II Cage (New Version)

  • It protects the HDMI cable from being collision or broken, keeps the signal stable. The HDMI cable clamp has a variety of mounting methods..
  • It attaches to camera cage through 1/4''-20 screw and can be adjusted and suitable for a wide range of HDMI cables..
  • HDMI Cable clamp has a unique anti-skid, point-like protrusion can firmly grasp the HDMI cable, will not make it move..
  • Equipped with a screw key to directly tighten the screws.Net Weight: 25g.
Check Stock

MAGICRIG Camera Cage Kit Compatible with BMPCC 6K Pro & 6K G2 for Blackmagic Pocket Cinema Camera 6K Pro & 6K G2

  • ...s. This handle comes with an allen wrench on the side, which attaches via magnet inside the handle. You can use it for different purposes, you can loosen those screws on the other side and can change front to back orientation according to your need..
  • 【T5 SSD Holder & Cable Clamp】The T5 holder is fixed to the cage by cold shoe, securing the T5 SSD and protecting the USB-C cable. The cable clamp attaches to the side of the cage with one 1/4”-20 screw, securing both the HDMI and USB-C cable by pushing the two sliding blocks..
Check Stock

Cable Clamp, Lokman 12 Pack 2 Inch Stainless Steel Cable Clamp, Pipe Clamp, Metal Clamp, Rubber Cushioned (2 Inch)

  • HIGH QUALITY- Made from 304 Premium Stainless steel material with quality rubber cushioned. Salt resistant, anti rust, anti-corrosion, waterproof, oil-proof. Clamps are sturdy, strong and reliable. The quality rubber insulation on the clamps holds up flawlessly. It is pliable which protect the tube well and keeps the clamp securely in place..
  • WIDELY USED- Clamps are marine grade. Perfect to apply in automotive, industrial, boat/marine, windshield, household etc. for wiring, cables, pipe, rack, line management and restoration. No matter in salt water/air environment..
  • STYLISH DESIGN- The P-Style design makes the clamps stylish, flexible and innovative.Strong and reliable. Easy to twist, bend, manipulate when install..
  • SIZE- Cable clamp screw hole diameter: 6.5mm, fit for 6M( 1/4 inch) screw bolt to through them. Cable clamp inside diameter 2 inch. Fit for 2 inch (outside diameter) wiring, lines,hoses or cables to a panel or frame application..
  • ENVIRONMENTAL FRIENDLY- It can be reused and recycle if you do not want them to stay on the original place thanks to the high quality material which makes them worked last for years..
Check Stock

Cable Clamp Lokman 12 Pack 3/4 Inch Stainless Steel Cable Clamp Pipe Clamp Metal Clamp Rubber Cushioned 3/4 Inch

  • HIGH QUALITY- Made from 304 Premium Stainless steel material with quality rubber cushioned. Salt resistant, anti rust, anti-corrosion, waterproof,....
  • WIDELY USED- Clamps are marine grade. Perfect to apply in automotive, industrial, boat/marine, windshield, household etc. for wiring, cables, pipe,....
  • SIZE- Cable clamp screw hole diameter: 6.5mm, fit for 6M( 1/4 inch) screw bolt to through them. Cable clamp inside diameter 3/4 inch. Fit for 3/4 inch....
  • STYLISH DESIGN- The P-Style design makes the clamps stylish, flexible and innovative. Easy to twist, bend, manipulate when install..
  • ENVIRONMENTAL FRIENDLY- It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which....
Check Stock

60pcs Cable Clamps Assortment Kit, 304 Stainless Steel Rubber Cushion P Clamps Wire Clamp in 7 Sizes 1/4' 5/16' 3/8' 1/2' 5/8' 3/4'1''

  • HIGH QUALITY CLAMPS- VIGRUE cable clamps are made of 304 Premium Stainless steel material and high quality rubber cushioned.Salt resistant, anti rust, anti-corrosion, waterproof, oil-proof.Wire Clamps are sturdy, strong and reliable..
  • SIZE- Cable clamp screw hold diameter: 6.5mm, suitable for 6M( 1/4'') screw bolts and nuts to thread. Cable clamp inside diameter range: 1/4'', 5/16'', 3/8'', 1/2'', 5/8',1'' (6.4mm~25mm). Fit for outside diameter range of 1/4''- 5/8'' wiring, lines,hoses or cables to a panel or frame application..
  • STYLISH DESIGN- The P-Style design makes the clamps stylish, flexible and innovative. Strong and reliable. Easy to twist, bend, manipulate when install..
  • APPLICATION:VIGRUE cable clamps assortment kit are perfect to apply in automotive, industrial, boat/marine, windshield, household etc. for wiring, cables, pipe, rack, line management and restoration. No matter in salt water/air environment..
  • WHAT YOU WILL GET - 60pcs, 1/4" 6mm(14pcs)5/16" 8mm(12pcs),3/8" 10mm(10pcs),1/2" 13mm(8pcs),5/8" 16mm(8pcs),3/4" 19mm(4pcs),1" 25mm(4pcs)..
Check Stock

20Pcs 1/2 Inch P-Type Cable Clamps, Stainless Steel Rubber Cushion Pipe Clamps Assorted, Tube Holder for Tube, Pipe or Wire Cord Installation

  • MATERIAL: Made from 304 premium stainless steel with rubber cushioned. Salt resistant, anti rust, anti-corrosion, waterproof, oil-proof. Clamps are sturdy and reliable. The quality rubber insulation on the clamps holds up flawlessly. It is pliable which protect the tube well and keeps the clamp securely in place.
  • SIZE: Cable clamp screw hole diameter: 6.5mm, fit for 6M( 1/4 inch) screw bolt to through them. Cable clamp inside diameter 1/2 inch. Fit for 1/2 inch (outside diameter) wiring, lines,hoses or cables to a panel or frame application.
  • EASY TO INSTALL: The P-Style design makes the clamps stylish, flexible and innovative. Strong and reliable. Easy to twist, bend, manipulate when install.
  • PACKAGE INCLUDE: Total 20Pcs rubber cushioned clamps are packed in a transparent plastic case, which is sturdy and neat, convenient for storage and access.
  • APPLICATION: Rubber pipe clamps apply to automotive, industrial, boat marine, windshield, household etc. Use for wiring, cables, pipe, rack, line management and restoration. No matter in salt water or air environment.
Check Stock