Reviews Cable Clamp Base

SMALLRIG Monitor Cage for Atomos Ninja V,Built-in NATO Rail and HDMI Cable Clamp Monitor Cage 2209

  • ???? Multiple Threaded Holes: SMALLRIG Ninja V Cage for Atomos mounts to the monitor by a 1/4’’-20 screw on the top and two M3 screws on the left side. Across the top and bottom the cage features multiple 1/4’’-20, 3/8’’-16 holes, and a locating mount point for ARRI on the base.
  • ???? Built-in NATO Rails: NATO rails are also provided along on both top and bottom to allow use with a range of SMALLRIG mounts such as SMALLRIG Ball Head Magic Arm 2071 or the 2072 for quick release.
  • ???? HDMI Cable Clamp: Includes a single HDMI cable clamp that works with a range of cables and is ideal for the AtomFlex 4k 60p cables. If required, the cage supports the use of a second SMALLRIG HDMI Cable Clamp 1693 for the HDMI output. It is attached on the left to protect the HDMI cable and port.
  • ???? Drive Locks: For backwards compatibility with Atomos Master Caddy II, the cage also features Drive locks that incorporate the additional size of standard 2.5’’ drives into the cage’s form factor.
  • ???? Attachment Points: SMALLRIG ninja v cage features raised attachment points on both the top and bottom of the cage for use with neck straps and to accommodate the Atomos Ninja V Sunhood frame.
Check Stock

ErGear Ultrawide Monitor Arm with USB, Monitor Mount Fits 13-35” Screen, Monitor Stand with Full Motion Gas Spring Arm Holds from 4.4lbs to 26.4lbs

  • Fit 13”-35” Screen Desk Mount: Heavy-duty Arm provides powerful support for your ultrawide monitors, holds up to a 26.5lbs.With 75*75mm or 100*100mm backside VESA..
  • Customize Your Screen Angle: Easy height adjustment, Up-down Tilt: +85°/-30° Rotate：360° Swivel：±90°,provides vertical and horizontal monitor shifts for different requirements to improve work efficiency..
  • Clamp Base & Grommet Mounting: You may choose to clamp the base to the edge of the desk. Grommet Mounting allows free location on the desktop where a mounting hole exists..
  • Stability - The solid construction and stable clamp/grommet base provide stable and secure holding for your monitors..
  • Integrated Cable Management & USB Connector: lifted monitor and concealed cables give you a messy-free desktop enjoyment. The package includes all accessories for mounting and access for instant mounting guidance..
Check Stock

CELYST LED Desk Lamp Piano Light with Interchangeable Base and Clamp, Eye-Caring Table Lamp & Clip Lamp with 3 Color Modes & Stepless Dimming, Memory Function, Flexible Gooseneck for Reading, 10W

  • ...t any angle, you can easily adjust the light direction according to your personal need.
  • 【Energy-Saving LED Piano Light】: Made with aluminum cooling technology, it provides 10W brightness while saving up to 80% more energy than traditional bulbs and has an extremely long lifespan(about 50,000 hours). 5ft long usb cable (usb powered), and we will send an extra 4.3ft usb extension cable to solve the problem of distance between the lamp and the wall plug. Perfectly meet your needs for piano lights.
  • 【What You Will Get & Product Warranty】: Please rest assured that adapter (5V/2A) has passed UL, CE safety certification. We promise to provide a 12-Month Warranty for this table lamp. If there is any product quality, you can contact us by Amazon message. Package includes: 1 lamp, 1 base, 1 clip, 1 manual, 1 adapter, and 1 usb extension cable.
Check Stock

NEEWER Microphone Arm Stand, Suspension Boom Scissor Mic Arm Stand with 3/8\ to 5/8\ Screw and Cable Ties Compatible with Blue Yeti Snowball Yeti X Quadcast, etc. Max Load 3.3lb/1.5kg (White)

  • ..." adapter allows you to mount multiple types of microphones on the boom arm, compatible with Blue Yeti, Blue Yeti Nano, Blue Snowball etc. Please note that it's not compatible with Blue Yeti Nano which has a 1/4" thread mount. The microphone clip mounts a microphone with a diameter of 1.26"/3.2cm to the boom arm.
  • 【Cable Straps & Solid Base】 The five cable straps help organize your microphone cable and keep the boom arm looking neat. The base connector is solid for durable and reliable holding.
Check Stock

Neewer Microphone Arm Stand with Upgraded C Clamp, Adjustable Suspension Boom Scissor Mic Stand with 3/8”-5/8” Adapter, Mic Clip, Cable Ties Compatible with Blue Yeti/Snowball, QuadCast, Max Load 2KG

  • 【Flexible & Durable Boom】 The Neewer boom arm offers 360° rotation and smooth movement in vertical and horizontal directions for flexible positioning. The durable steel build ensures a maximum load capacity of 4.4lb (2kg)—ideal for singing, podcasting, live streaming, and video gaming.
  • 【Upgraded Desktop Clamp】 The upgraded C-clamp with a widened base is more stable than ever and compatible with desks of up to 2.55” (6.5cm) thick. Its edge-mounted design can keep your desktop clean, and the inner rubber pads avoid scratches.
  • 【Mic Clip & Screw Adapter】 The microphone clip fits various condenser microphones up to 1.26” (3.2cm) in diameter, and the 3/8” to 5/8” screw adapter can let it compatible with Blue Yeti, QuadCast, and other microphones to this boom arm.
  • 【Convenient Cable Straps】 Five hook-and-loop cable straps allow you to tie the microphone cable along the boom arm and prevent it from tangling and dangling.
  • 【Package Contents】 1 × Microphone Boom Arm, 1 × Desk Mounting Clamp, 1 × Microphone Clip, 1 × 3/8” to 5/8” Adapter, 5 × Cable Strap.
Check Stock

Magnifying Lamp with Clamp, LED Desk Lamp, 3X Magnifier Glass with 3 Modes Lighting for Reading, Crafting, Sewing, Soldering, Jewelry Makers

  • 3 Brightness Levels - Build-in 42pcs 5W LED light, is bright as daylight and powered by USB with 3 brightness levels (white, warm, cold) - The brightness levels, can be set with a key (10 brightness levels total). The optical glass magnifier, has a 300 percent magnification, allows a clear and distortion-free view..
  • 360° FLEXIBLE GOOSENECK - The gooseneck arms are made of powder coated metal, the flexible gooseneck allows you to point the glass and light where you want, and then frees your hands..
  • BENCH CLAMP BASE MOUNT - Metal clip base provides a sturdy and reliable way to hold the magnifying glass LED lamp, with an adjustable positioning screw, can easily clip to any desktop.
  • PERFECT FOR VARIOUS PEOJECTS - Perfect for soldering, reading, craft, sewing, cross stitch, knitting, jewelry making, painting, embroidery, repairing electronics, etc. The clamp can firmly hold onto a desk, bedhead, space saving and offering hands free magnifier and light..
  • WHAT YOU GET - 1 x Magnifier lamp,1 x USB charging cable,1 x Bench Clamp Base,1 x Mini Spanner. If you have any questions, please feel free to contact our after-sale services, all issue will be resolved timely..
Check Stock

Neewer Microphone Arm, Upgraded Mic Arm Microphone Stand Boom Suspension Stand with 3/8'to 5/8' Adapter and Cable Ties Compatible with Blue Yeti, Snowball, Quadcast and Other Mics, Max Load 2KG

  • 【Flexible Boom Scissor Arm】 This adjustable microphone boom arm is easy to fold up and carry. It’s also convenient to adjust the angle and height of the arm to suit your vocal recording need. Loosen the adjustment knob and then adjust the boom arm.
  • 【Desk Mounting Clamp】 The desk mounting clamp features rubber padding to protect your desk from scratches. Fits most desks with a desktop thickness of up to 2"/5.3cm.
  • 【3/8" to 5/8" Adapter & Mic Clip】 The included 3/8" to 5/8" screw adapter can be used to mount a compatible microphone (such as Blue Yeti, Blue Snowball) on the boom arm. (Not compatible with Blue Yeti Nano which has a 1/4" thread mount.) The maximum diameter of the microphone clip is 1.26"/3.2cm. Ideal for stage/studio recording, broadcasting, TV stations, and more.
  • 【Heavy-Duty Support】 The boom arm is compact yet strong enough to support a maximum load of 4.4lb/2kg thanks to the strong springs and metal positioning screws. The springs don’t get in the way of tightening the adjustment knob.
  • 【Cable Straps & Solid Base】 Use the five cable straps to organize your microphone cable and make the boom arm look neat. The base connector is solid for durable and reliable holding.
Check Stock

GMRS Mobile Radio Mini Size 20 Watt Long Range GMRS Repeater Capable NOAA Weather Alert Two-Way Radio GS800D

  • 1.｜GS800D｜This GMRS Mobile Radio with 8 repeater channels, 15 high power GMRS channels 10 NOAA weather channels provide clear and crisp communication, compatible with all GMRS and FRS radios. FCC ID: 2AV62KT8900D..
  • 2.｜Long Range｜With External Bracket Lip Mount NMO Antenna: 3.5'' Antenna with NMO Base Mounting (100w) and 16.4 ft PL259 UHF Male cable. It built in clamp that attaches to the trunk or the hood of car..
  • 3.｜Mini Size｜As a compact mobile radio (3.85 (W) x 4.96(D) x 1.69 (H)), it is small enough to mount just about anywhere in any vehicle, suitable for outdoor activities such as mountaineering, hiking, camping and so on..
  • 4.｜Functions & Features｜Dual Band Scanning Receiver can monitor NOAA channels and 160 programmable scanner channels for interesting channels. High (20W)/ Mid (10W) /Low (5W) and Wideband or Narrowband Switchable. CTCSS, DCS, 2Tone, 5Tone, DTMF, Quad Watch, TOT, Remote Stun, Remote Revive, Remote Kill, Patrol/ Monitor Function etc..
  • 5.｜In The Box｜1*GS800D Mobile Radio, 1*Microphone, 1*DC Cable, 1*Mounting Brackets, 1*Screws & Mounting Hardware, 1*Programming Cable, 1*3.5 Inch NMO Antenna, 1*16.4 ft RG58 Coax Cable with Clamp, 1*User’s Manual..
Check Stock

Motcoda Flexible Hose Clamp Pliers Tool 24\ Long Reach Locking Clamp Plier For Automotive Radiator Fuel Water 18mm-54mm Hose Clamps

  • ...th long line design】This flexible hose clamp pliers is a 24 inch pliers, designed with 24in flexible wire rope, allowing you to operate flat hose clamps in areas that are usually hard to touch, the flexible hose can be bent to any position, it is An easy-to-operate long-distance remote pliers, remote hose pliers, cable hose clamp pliers.
  • 【Flex pliers with locking function】This flexible pliers, has a ratchet locking mechanism, this locking mechanism keeps the engine hose pliers in the open size position, and holds the cable hose clamp pliers in place, this radiator clamp remover is one-handed Can be operated.
  • is a cooler clamp pliers, radiator hose spring clamp pliers that help you to remove and install easily.
  • 【Widely used long reach clamp pliers】This flexible hose clamp tool can loosen hose clamps on cars, remove factory spring hose clamps, factory GM clamps, machine coolant or radiator hoses.
  • let this flexible hose clamp clamp plyers, can be your radiator hose clamp removal tool, cable clamp plier, heater hose clamp pliers, brake hose clamp pliers, remote hose clamp pliers.
  • 【Multi-Compatible with spring clamp tool】This radiator hose clamp pliers has a maximum opening of 1-1/2" and a long distance of 2 feet.
Check Stock

Neewer Microphone Arm Stand, Suspension Boom Scissor Mic Arm Stand with 3/8” to 5/8” Screw and Cable Ties Compatible with Blue Yeti, Snowball, Yeti X, Quadcast and Other Mics, Max Load 1.5kg

  • 【Adjustable Microphone Boom Arm】 Conveniently adjust the angle and height of this mic boom arm to suit your vocal recording need—just loosen the adjustment knob and adjust the boom arm. It’s also easy to fold up and carry. Perfect for stage/studio recording, broadcasting, TV stations, and more.
  • 【Stable Arm Support】 With the strong springs and metal positioning screws, the boom arm is compact yet stable enough to support a load of up to 3.3lb/1.5kg. And the springs don’t get in the way of tightening the adjustment knob.
  • 【Desk Mounting Clamp】 The desk clamp has rubber padding to protect the desk surface from scratches and scuffs. Compatible with most desks with a desktop thickness of up to 2”/5.3cm.
  • 【3/8” to 5/8” Screw Adapter & Mic Clip】 The 3/8” to 5/8” adapter allows you to mount a compatible microphone (like Blue Yeti or Blue Snowball) on the boom arm. It’s not compatible with Blue Yeti Nano which has a 1/4” thread mount. The microphone clip mounts a microphone with a shaft diameter of 1.26”/3.2cm to the boom arm.
  • 【Cable Straps & Solid Base】 The five cable straps help organize your microphone cable and make the boom arm look neat. The base connector is solid for durable and reliable holding.
Check Stock

Gas Spring Laptop Mount with Adjustable Tray - Klearlook 2in1 Full Motion Monitor Laptop Stand Mount,Fully Adjustable Extension Arm Mount with 75x75/100x100mm VESA Plate,Clamp-on and Grommet Mounting

  • ...ight Adjustable】The desk laptop arms easily tilt, swivel and rotate (swivel: -90°/+90°, rotate: 360°, tilt: -90°/+85° and height adjustment along the center pole). The wide adjustable range make it a breeze to set your own comfortable workstation and switch between standing and sitting posture..
  • 【Integrated Cable Management】Each clamp on the tray features a cable clip that helps organize your laptop cables in one place. Meanwhile, attach the included cable clip to the pole and manage the cables and hex wrenches..
  • 【Monitor Arm Mount】It come with VESA plate with VESA mounting holes 75x75mm and 100x100mm. You can replace the laptop tray with your monitor. VESA plate can be installed onto the back of monitor individually. Not only flat monitor, but also curved monitor can be connected with included screws and spacers. The monitor desk extender tray fits 15 to 27 inches monitor.(Max Load is 15.5lbs).
  • 【Multiple Installation Options】this monitor laptop riser arm offer clamp and grommet mounting( C-Clamp allows the thickness of the table up to 3.35 inches and Grommet-Base maximum supports 1.6’’ diameter desktop cable grommet hole). All tools and hardware are provided for easy assembly..
Check Stock

LED Piano Desk Lamp, NovoLido 2-in-1 Bright Flexible Tall Table Lamp with Base & Clamp Interchangeable, 10W Architect Desk Lights for Home Office, 1000lm, 3 Color Modes, 30 Brightness Levels, Black

  • ...on easily and its long light panel can cover a wider range. Compared to others, NovoLido desk light also provides more even, soft and diffused light. The CRI of this desk lamp is more than 90%, which provides the most true color..
  • 5. ▶Extra Bonus: The lamp cord is 1.5m long, we also provide 1.3m long usb extension cable for this lamp. So you don't have to worry about the distance between the socket and the lamp.▶You will get 1xdesk lamp, 1xsturdy base, 1xmetal clamp, 1xadapter, 1xextension cord, 1xuser manual. We promise if you have any problem about this lamp within 12 months, please contact us, we will solve your problem within 24 hours and give you a well-pleasing solution..
Check Stock

VIVO Clamp-On Vertebrae Cable Management Kit, Height Adjustable Desk Quad Entry Wire Organizer, Black, DESK-AC01P-B

  • Vertebrae Cable Management - Clamping to the edge of your desktop, this product is designed to protect and organize AV and power cords. Great for height adjustable or stationary desk systems..
  • Block System - Features snap-together interlink blocks with 7 inch diameter steel base plate for stability. The 4-way channel entry design makes it easy to slip cables in at any angle..
  • Heavy Duty C-clamp - Easily clamps to the back of your desk with a small footprint. No drilling required. Clamp padding protects your table surface from scuffs and scratches..
  • Desk to Floor - The 4 foot cable management strip ensures that your cords will be kept organized from your work surface to the floor..
  • Stay Organized - Keeping your workspace clean and tidy creates a non-cluttered environment that encourages focus and concentration..
Check Stock