Reviews Cable Cables Patient Probe

Fluke Networks MT-8200-60-KIT IntelliTone Pro 200 Toner and Probe Kit, IntelliTone Probe and Toner Kit,Multicolor

  • IntelliTone digital toning eliminates noise and false signals.
  • SmartTone analog toning precisely isolates individual wire pairs.
  • Locates cables safely and effectively on active networks.
  • Verifies twisted pair installation with visual end to end continuity test.
  • Probe detects digital signal and 1 kilo hertz signal from the analog toner.
  • Probe has built in pair tester to identify open, shorted and crossed pairs.
  • Signal strength indicator LEDs so you can help identify 1 cable that is bundled with other cables.
  • Confirms cable location, verifies cable continuity, and detects cable faults (opens, shorts, and reversed pairs) in 1 step.
Check Stock

Tone Generator Kit, Wire Tracer Circuit Tester, 200EP High Accuracy Cable Toner Detector Finder Tester, Line Finder ,Inductive Amplifier, Probe Kit with Adjustable Volume for Network Cable Collation

  • 【Widely Application 】 200EP Tone generator and probe kit with probe are widely used in the maintenance of cables and wires. The measurement area includes line tracking, short circuit test, clear/busy/ringing identification. Essential tool for electricians..
  • 【Safety and Easy To Use 】This tone and probe kit is made of high-quality materials, wear-resistant, corrosion-resistant. Resistive plastic carbon-fiber tip prevents accidental shorts when probing wires. Make it safer to use..
  • 【 Professional 】When used in conjunction with any tone generator, professional wire toner probe kit with adjustable volume is designed to identify and trace wires or cables within a group without damaging the insulation. The clamp mode can be used for direct measurement of non-terminal cables, as well as for telephone and network line measurement..
  • 【Powerful Functions】The clamp mode can be used for direct measurement of non-terminal cables, as well as for telephone and network line measurement..
  • 【Warm Tip】This device is mainly to measure non-energized Cable, or low-voltage situation less than 24V .For any reason you are not satisfied, you can request a free replacement or a full refund..
Check Stock

Fluke Networks 11289000 Electrical Contractor Telecom Kit II with Pro3000 Analog Tone and Probe Kit and Case

  • Pro3000 analog tone generator and probe plus accessories for testing, troubleshooting, and terminating wiring in telephone and data lines.
  • Tone generator and probe locate and trace cables, wires, and wire pairs, and check continuity and polarity on inactive networks.
  • ABN clips allow access to individual wire pairs and RJ11 plug connects to telephone jacks.
  • Sends a loud tone up to 16 kilometer (10 miles) in most cables and provides 5 distinct cadences for isolating individual wire pairs.
  • Kit includes a punch down, cut blade, cable stripper, probe pic, and D snips for separating, cutting, and terminating wiring, and a standard 4 wire modular adapter for connecting to telephone jacks.
Check Stock

Underground Cable Locator, Seesii Wire Tracer Detector with Earphone, Test for Network Cable, Telephone Line, Electrical Circuits, Pipelines, Underground Dog Fence Ducts Walls Buried Cables Locator

  • Time and Money Saver: The underground wire locator consists of a transmitter, a receiver, and its accessories. Helpful-Locating & tracking buried and hidden wires. It allows the user to track low voltage cables used for garden and landscape automatic watering systems, and low voltage garden lighting systems. It can also be used to trace other power line, telephone lines, network cables..
  • Professional Cable Locator: The wire tracker is made of high-quality ABS material, which is sturdy and durable. At the same time, the button operation is convenient, the LCD display effect is intuitive, with a buzzer alarm, and an LED flashlight, which is very suitable for cable construction and construction pipelines. Construction, maintenance of communication cables, power supply lines, and electric heating lines..
  • Extended Detection Probe: With LED lights, the probe is simple to use and flexible, convenient for accurately locating the line. The detection depth is 6.5 feet and the detection length is 3,200 feet..
  • White LED Flashlight & Earphone: This circuit breaker finder has white LED flashlight on the receiver and transmitter f....
Check Stock

Jonard Tools TK-50 Communications Tool Kit, No. of Pcs. 5

  • WHAT’S IN IT: can wrench, ergonomic cable splicing knife, electrician's scissors, probe pick, and pouch (made of durable PVC material with metal clip).
  • CAN WRENCH: Ideal for opening telephone box fasteners and tightening nuts on binding-post terminals, with a built-in 22 AWG wire stipper.
  • CABLE SPLICING KNIFE: Used for cutting through many types of high strength cables and insulation, ergonomic non-slip grip for increased comfort and control.
  • ELECTRICIAN’S SCISSORS: Designed for heavy duty use with 2 wire stripping notches for 18-20 AWG and 22-24 AWG wire, one blade is serrated and back side of blade has a scraper and file.
  • PROBE PICK: Tough resilient ABS insulating probe “sludger” with L shaped wire hook extension on one side and flat notched end on other side, used in electrical contacts.
Check Stock

Amprobe BT-120 Circuit Breaker Tracer

  • Save Your Time and Money - The wire tracer & circuit tester with alligator clips & RJ11 plug can help you quickly detect the continuity of cables or wires, no more calls, no more cost, find and fix it by yourself..
  • Please Note: Two 9V batteries required, batteries are not included, and the probe NOT NEED touching the wire to pick up a tone. Non-contact probe audibly identifies selected wire or cable..
  • Multifunction Wire Locator - You Can Trace Wires in a Range of Wires and Cables Including Network Telephone Line, Coaxial and Verify the Continuity of Your Installation..
  • Find Wires Quickly and Accurately - Flexible usage, thanks to the cont mode you can check for short and open circuits, and the RJ11 connector lets you test telephone.
  • What You Will Get: We offer 1-YEARS service, hassle-free return and money back policy, buy with confidence! Kit includes wire tracer probe and transmitter with RJ11 phone connector and a pair of alligator clips. If you have any questions about wire tracer & circuit tester, please feel free to contact us at any time, we will reply you within 12 hours..
Check Stock

mykit Ethernet Cable Toner Tracer Tone Generator Receiver Probe Wand, Basic Butt Set Telephone Test Set, Carry Pouch, for Toning Tracing Voice/Data Lines, Troubleshoot Phone Wiring/Ethernet Cabling

  • Network cable toner and probe provides clear and precise tracing of communication cabling, tests RJ11and RJ45 terminated cables for mis-wires, open and short faults, locates cables safely and effectively at patch panels, switches, termination blocks or hidden within bundles.
  • Ethernet cable/phone line toner and tester provides you tone and trace Cat5 Cat5e Cat6 cable or telephone line effectively, RJ11 RJ45 cable sequence collation, continuity test, DC positive negative polarity detection.
  • Basic butt set is great for the occasional testing the phone lines of alarm systems, fax lines, elevator or other emergency lines, test tone on faxes and panels as needed, or used as a temporary communication handset (no speakerphone).
  • Basic telephone test set comes with alligator clamp and a 66 block tip as well as a coupler, so it can offers three ways to connect to the line. The small telephone has the functions including FSK/DTMF dual system caller ID (only the number), dial tone, dial out, on off hang up, redial the last number.
  • What's in the Box: cable toner and probe, RJ11 line, RJ45 c....
Check Stock

La Blanca Women's Standard Island Goddess Scoop Front Lingerie Mio One Piece Swimsuit (8, Electric Pink)

  • TEST TONE TRACE VDV KIT: This IDEAL Kit is a complete test solution for detecting cables and identifying wiring problems in voice, data, and video (VDV) systems. This durable kit is perfect for daily use by twisted pair or coaxes cable technicians..
  • DESIGN: VDV contains an LCD screen that displays Pass/Fail results and warnings about wiring faults that need to be fixed. Built-in tone generator provides four different tones for tracing coaxial, RJ-45, and RJ-11 lines and de-energized copper cables..
  • APPLICATION: Designed for use in LAN, telephone, coax video, security, A / V, and other general coaxial or twisted-pair applications. Installers and systems specialists will benefit from this cable testing kit because it performs critical testing duties..
  • TESTS AND IDENTIFIES: The testing kit can be used in the test and identification of shorts, openings, faulty wires, split pairs, and reverse connections or all typical faults in modular connector/jack terminations that cause slow / no connections..
  • SPECIFICATIONS: Kit contains 33-856 VDV Multimedia tester, and 62-164 Amplifier Probe, Probe, plus with many coax adapter accessories. A carrying case is also provided. 2x 9V batteries are included..
Check Stock

Klein Tools VDV501-829 Cable Tester, VDV Commander with Test-n-Map Remotes, Cable Installation Tone Generator and Probe Kit

  • Cable tester locates, tests and measures coaxial, data (RJ45) and telephone (RJ11) cables.
  • Identify wiring faults including miswire, open fault, short fault, split-pair, wire map.
  • Detect, identify and test Power over Ethernet (PoE).
  • Measure cable length and distance-to-fault with Time Domain Reflectometry (TDR) technology.
  • Measure paired-conductor cables up to 1500-Foot (457 m) with accuracy of up to +/-(5-Percent and 1-Foot/0.3 m).
  • Single-end cable testing or complete two-end cable testing with Test-n-Map ID Remote.
Check Stock

Upgraded 8" Meat Thermometer Probe Replacement Temperature Probe for Thermopro TP20 TP17 TP16 TP10 TP09 TP08 TP-08S TP-07 TP06S TP04, Famili MT004 OT007 OT009 OT-08, Fit Listed Models Only

  • 【Same quality as ThermoPro】 Our Probes are produced by the same manufacturer as ThermoPro, buy with confidence..
  • 【Compatible with listed models only】Replacement probe compatible to Thermopro TP20, TP17, TP16, TP09B, TP09, TP-10, TP08, TP-08S, TP07, TP-07S, TP06S, TP06, TP04.
  • 【Also suit for】This food probe is a replacement for Famili meat thermometer MT004, Famili OT007, Famili OT009, Famili OT008 (food probe), Habor kitchen food thermometer HCP5H, Digital Cooking Kitchen Food Meat Thermometer.
  • 【Upgraded Probes】 8″ super long probe, non-slip design, balanced in the hand, easier to plug in or pull out, heat resistant material help to prolong service life.
  • 【Durable and Accurate Probes】Grilling thermometer features food grade stainless steel probe with step-down tip design to get temperature more precisely and quickly.
  • 40″ stainless steel mesh cables rated for 716°F connects thermometer to base, which is located outside of oven/grill/smoker. Cable Length: 40″ stainless steel mesh cable.
Check Stock

Upgraded 8" Thermometer Probe Replacement Temperature Probe for Thermopro TP20 TP17 TP16 TP04 TP06S TP-07 TP08 TP-08S TP09B TP09 TP10, Famili MT004 OT007 OT009 OT-08, Fit Listed models only

  • 【Same quality as ThermoPro】 Our Probes are produced by the same manufacturer as ThermoPro, buy with confidence..
  • 【Compatible with listed models only】Replacement probe compatible to Thermopro TP20, TP17, TP16, TP09B, TP09, TP-10, TP08, TP-08S, TP07, TP-07S, TP06S, TP06, TP04.
  • 【Also suit for】This food probe is a replacement for Famili meat thermometer MT004, Famili OT007, Famili OT009, Famili OT008 (food probe), Habor kitchen food thermometer HCP5H, Digital Cooking Kitchen Food Meat Thermometer.
  • 【Upgraded Probes】 8″ super long probe, non-slip design, balanced in the hand, easier to plug in or pull out, heat resistant material help to prolong service life.
  • 【Durable and Accurate Probes】Grilling thermometer features food grade stainless steel probe with step-down tip design to get temperature more precisely and quickly.
  • 40″ stainless steel mesh cables rated for 716°F connects thermometer to base, which is located outside of oven/grill/smoker. Cable Length: 40″ stainless steel mesh cable.
Check Stock

Thermomedics THR PRO-TF300-CS Caregiver Touch Free Thermometer

  • PROVEN ACCURACY… documented clinical precision in a wide range of medical settings.
  • INCREASED EFFICIENCY… eliminates probe-cover costs and storage/transport logistics, reduces time for vital-signs, available without cart/trolley.
  • no charger-base required, up to 15, 000 temps from one set of AA batteries.
  • EASE OF USE… simple positioning, one-button operation, improved patient cooperation, bright backlit display and 30-temperature memory recall.
  • NON-CONTACT… delivers improved hygiene with reduced risk of cross-contamination and no probe-covers required, minimizes risk of operator error, provides immediate access to measurement site, no patient disturbance.
  • INSTANT RESULTS… measurement in 1-2 seconds, reliable and repeatable.
Check Stock

Fluke Networks - 5018513 MS-POE-KIT MicroScanner Copper Cable Verifier & PoE tester for RJ-45 Category 5-6A Ethernet Cables, Includes IntelliTone Pro 200 & Remote ID Kit

  • Oversized backlit LCD screen displays clear results in bright light or complete dark with intuitive icons, supports Class 1 to 8 PoE, detects network switch speed capabilities up to 10G Ethernet, cable length, wiremap, cable ID, and distance to fault, detects POTS.
  • Test voice/data/video cables with integrated RJ45 which support low voltage testing with no need for adapters, ensures high quality installations and quick troubleshooting in active network environment, measures length (460 meter or 1500 feet with resolution to 0.3 meter or 1 foot), wiremap to TIA 568A/B standards, included remote ID locators.
  • Rugged and ergonomic easy grip rubber design with strong magnetic strap, locates virtually any cable or wire pair with IntelliTone digital and analog toning, probe included.
Check Stock